[Tue Aug 7 03:24:03 2012] Detection parameters: Position = (110.7, 339.8) = 14 44 3.36 -62 11 33.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 218.1 +/- 23.8 Background counts = 57.6 Rate = 0.02 +/- 0.002 [Tue Aug 7 03:24:04 2012] Off-axis axis estimate = 13.94' [Tue Aug 7 03:27:41 2012] Using EEF radius (= 13.40 ")to estimate initial spatial extent for simple fitting [Tue Aug 7 03:27:41 2012] Initial guess for spatial extent in simple fitting = 13.40" [Tue Aug 7 03:27:41 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.956 [Tue Aug 7 03:27:41 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 13.40" [Tue Aug 7 08:24:40 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src49.ximg exists [Tue Aug 7 08:24:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src49.csv [Tue Aug 7 08:24:40 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src49_1.ximg exists [Tue Aug 7 08:24:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src49.csv [Tue Aug 7 08:24:40 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src49_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Aug 7 08:24:42 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src49.ximg exists [Tue Aug 7 08:24:42 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists [Tue Aug 7 08:24:42 2012] Fit fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly [Tue Aug 7 20:58:20 2012] Spatial fit model total counts = 1154.810000, observed total counts = 1154.000000 [Tue Aug 7 20:58:20 2012] Offset between fit and detection position for source 49 = 1.051661 pixels [Tue Aug 7 20:58:20 2012] Warning, changing simple spatial fit ID from 49 to 6 [Tue Aug 7 20:58:20 2012] 961.882000 total counts/ 585.024000 bgd. counts: snr = 15.580841 Spatial fit parameters: Offset between fit and detection position for source 49 = 1.051661 pixels Position = (111.4, 339.0) = 14 44 2.96 -62 11 36.9 Extent = 27.0 (25.9-54.0)" x 18.7 (13.0-25.5)", rotation angle = 324 (288-354) degrees Source counts = 376.9 +/- 31.0 Background counts = 585.0 Rate = 0.04 +/- 0.003 [Tue Aug 7 20:58:20 2012] Vigneting correction estimate = 1.000000 [Tue Aug 7 20:58:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Aug 7 20:58:20 2012] Assessing source extent using major axis lower bound [Tue Aug 7 20:58:20 2012] Source does appear to be extended [Tue Aug 7 20:58:20 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.02 [Tue Aug 7 20:58:21 2012] Source is confused with source 6 [Tue Aug 7 20:59:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Tue Aug 7 20:59:37 2012] Initial guess for spatial extent in simple fitting = 22.85" [Tue Aug 7 20:59:37 2012] source mask rpix=5.3, npix_max = 132, mask sum = 132, frac = 0.997 [Tue Aug 7 20:59:37 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 22.85" [Wed Aug 8 05:47:18 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src45.ximg exists [Wed Aug 8 05:47:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src45.csv [Wed Aug 8 05:47:18 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src45_1.ximg exists [Wed Aug 8 05:47:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src45.csv [Wed Aug 8 05:47:18 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src45_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 8 05:47:21 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src45.ximg exists [Wed Aug 8 05:47:21 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists [Wed Aug 8 05:47:21 2012] Fit fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly [Wed Aug 8 22:57:24 2012] Warning, spatial fit 45 centroid is now closest to src. 45 [Wed Aug 8 22:57:25 2012] Vigneting correction estimate = 1.000000 [Wed Aug 8 22:57:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 8 22:57:25 2012] Assessing source extent using major axis lower bound [Wed Aug 8 22:57:25 2012] Source does appear to be extended [Wed Aug 8 22:57:25 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.02 [Wed Aug 8 22:58:23 2012] XMMSAS src. selection expression = ellipse(9641.610000, 29440.842000, 1619.268047, 1122.168032, 324.071000, X, Y) [Wed Aug 8 22:58:23 2012] Writing source region out to fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src49_src.reg [Wed Aug 8 22:58:23 2012] Extracting stamp from image fullrun_pn_xmm0110011401_pi300-10000_cl_sm2.00.img.gz, (18, 246) - (204, 432) [Wed Aug 8 22:58:23 2012] XMMSAS bgd. selection expression = annulus(9641.610000, 29440.842000, 2698.780078, 5397.560155, X, Y) && !ellipse(9577.054000, 29299.524000, 2121.344061, 2121.344061, 0.000000, X, Y) && !ellipse(15676.844254, 28929.875671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(7577.642868, 26585.580383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15341.117600, 30790.304000, 1796.904052, 1796.904052, 0.000000, X, Y) && !ellipse(10095.300000, 30010.414000, 3294.648095, 3294.648095, 0.000000, X, Y) && !ellipse(9211.048000, 29057.790000, 2143.384062, 2143.384062, 0.000000, X, Y) && !ellipse(14733.141968, 29194.669708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14380.378845, 28773.632507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8479.017349, 28840.788818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(7477.268158, 28838.614349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8116.598549, 28102.098602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9408.910000, 28364.768000, 2149.688062, 2149.688062, 0.000000, X, Y) && !ellipse(7449.954000, 27236.964000, 1112.920032, 1112.920032, 0.000000, X, Y) && !ellipse(8676.382000, 27233.372000, 2202.096063, 1144.056033, 132.222100, X, Y) && !ellipse(8552.298000, 26866.440000, 1731.664050, 1731.664050, 0.000000, X, Y) && !ellipse(8086.001991, 26262.343842, 870.000000, 870.000000, 0.000000, X, Y) [Wed Aug 8 22:58:23 2012] Writing fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src49.gif [Thu Aug 9 00:34:18 2012] Mean detx,y = (-15177.20, -7500.71) [Thu Aug 9 00:34:21 2012] Setting backscal keywords in source and bgd. spectrum [Thu Aug 9 00:35:52 2012] Binned source spectrum to 10 counts/bin [Thu Aug 9 00:35:53 2012] Setting source spectrum file to fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src49_src_b10.pi.gz [Thu Aug 9 00:35:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src49_bgd.pi.gz [Thu Aug 9 21:39:55 2012] Updating aperture counts using extracted products [Thu Aug 9 21:39:55 2012] Error reading totcts from fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src49_src_b10.pi.gz [Thu Aug 9 21:39:57 2012] Calculating source flux in energy range 0.30-8.00 [Thu Aug 9 21:39:57 2012] Using photon index=1.80, rate=0.0385, arf fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src49.arf [Thu Aug 9 21:39:57 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu Aug 9 21:39:57 2012] Updating source flux to 2.9e-13 [Thu Aug 9 22:00:41 2012] Flag c found in src. 49 procflags, skipping spectral fitting