[Tue Aug  7 03:24:03 2012] Detection parameters:
  Position = (175.6, 348.1) = 14 43 22.98 -62 10 58.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.0 +/- 18.5
  Background counts = 83.6
  Rate = 0.007 +/- 0.001

[Tue Aug  7 03:24:04 2012] Off-axis axis estimate = 9.60'
[Tue Aug  7 03:27:41 2012] Using EEF radius (= 11.23 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 03:27:41 2012] Initial guess for spatial extent in simple fitting = 11.23"
[Tue Aug  7 03:27:41 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.948
[Tue Aug  7 03:27:41 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 11.23"
[Tue Aug  7 08:24:40 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src43.ximg exists
[Tue Aug  7 08:24:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src43.csv
[Tue Aug  7 08:24:40 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src43_1.ximg exists
[Tue Aug  7 08:24:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src43.csv
[Tue Aug  7 08:24:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 08:24:42 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Tue Aug  7 08:24:42 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Tue Aug  7 08:24:42 2012] Fit fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Tue Aug  7 20:58:20 2012] Warning, spatial fit 43 centroid is now closest to src. 44
[Tue Aug  7 20:58:20 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 20:58:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 20:58:20 2012] Assessing source extent using major
[Tue Aug  7 20:58:20 2012] Source does appear to be extended
[Tue Aug  7 20:58:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 20:59:37 2012] Using EEF radius (= 11.23 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 20:59:37 2012] Initial guess for spatial extent in simple fitting = 11.23"
[Tue Aug  7 20:59:37 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.948
[Tue Aug  7 20:59:37 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 11.23"
[Wed Aug  8 05:47:18 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src40.ximg exists
[Wed Aug  8 05:47:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src40.csv
[Wed Aug  8 05:47:18 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src40_1.ximg exists
[Wed Aug  8 05:47:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src40.csv
[Wed Aug  8 05:47:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 05:47:21 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Wed Aug  8 05:47:21 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Wed Aug  8 05:47:21 2012] Fit fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Wed Aug  8 22:57:24 2012] Source 43 is offset by 4.640941 and 4.129857 pixels which is larger than
2 X fitted extent = 1.250083 x 1.250083, not incorporating fit results
[Wed Aug  8 22:57:24 2012] Spatial fit model total counts = 647.102000, observed total counts = 647.000000
[Wed Aug  8 22:57:24 2012] Offset between fit and detection position for source 43 = 6.460932 pixels
[Wed Aug  8 22:57:24 2012] 586.958000 total counts/ 438.685000 bgd. counts: snr = 7.079224
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 6.460932 pixels
  Position = (176.9, 354.5) = 14 43 22.19 -62 10 31.2
  Extent = 22.5 (22.4-44.9)", rotation angle = 0
  Source counts = 148.3 +/- 24.2
  Background counts = 438.7
  Rate = 0.02 +/- 0.002
[Wed Aug  8 22:57:25 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 22:57:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 22:57:25 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 22:57:25 2012] Source does appear to be extended
[Wed Aug  8 22:57:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 22:58:22 2012] XMMSAS src. selection expression = ellipse(15341.117600, 30790.304000, 1347.678039, 1347.678039, 0.000000, X, Y)
[Wed Aug  8 22:58:22 2012] Writing source region out to fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src43_src.reg
[Wed Aug  8 22:58:22 2012] Extracting stamp from image fullrun_pn_xmm0110011401_pi300-10000_cl_sm2.00.img.gz, (99, 277) - (254, 432)
[Wed Aug  8 22:58:22 2012] XMMSAS bgd. selection expression = annulus(15341.117600, 30790.304000, 2246.130065, 4492.260129, X, Y) && !ellipse(9577.054000, 29299.524000, 2121.344061, 2121.344061, 0.000000, X, Y) && !ellipse(15676.844254, 28929.875671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21081.226000, 34451.228000, 1670.544048, 1670.544048, 0.000000, X, Y) && !ellipse(20693.482285, 34006.273102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19282.116501, 34219.490540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20217.606000, 34040.474000, 3341.088096, 3341.088096, 0.000000, X, Y) && !ellipse(18803.308000, 34064.456380, 1762.576051, 1762.576051, 0.000000, X, Y) && !ellipse(10095.300000, 30010.414000, 3294.648095, 3294.648095, 0.000000, X, Y) && !ellipse(17220.490234, 29560.190247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19400.366000, 29438.820200, 1470.272042, 1470.272042, 0.000000, X, Y) && !ellipse(17952.099487, 29541.546631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9641.610000, 29440.842000, 2159.024062, 1496.224043, 324.071000, X, Y) && !ellipse(9211.048000, 29057.790000, 2143.384062, 2143.384062, 0.000000, X, Y) && !ellipse(20153.875458, 29186.683380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14733.141968, 29194.669708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20705.460000, 29062.712000, 1470.272042, 1470.272042, 0.000000, X, Y) && !ellipse(18854.731125, 29258.379791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18014.517899, 28938.642578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14380.378845, 28773.632507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16714.914246, 29003.855408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17839.664307, 28385.310577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9408.910000, 28364.768000, 2149.688062, 2149.688062, 0.000000, X, Y) && !ellipse(8676.382000, 27233.372000, 2202.096063, 1144.056033, 132.222100, X, Y)
[Wed Aug  8 22:58:22 2012] Writing fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src43.gif
[Thu Aug  9 00:16:21 2012] Mean detx,y = (-9279.59, -6606.91) 
[Thu Aug  9 00:16:25 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 00:17:21 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 00:17:21 2012] Setting source spectrum file to fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Thu Aug  9 00:17:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Thu Aug  9 21:39:54 2012] Updating aperture counts using extracted products
[Thu Aug  9 21:39:55 2012] Error reading totcts from fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Thu Aug  9 21:39:57 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 21:39:57 2012] Using photon index=1.80, rate=0.0151, arf fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src43.arf
[Thu Aug  9 21:39:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 21:39:57 2012] Updating source flux to 7.6e-14
[Thu Aug  9 22:00:41 2012] Flag b found in src. 43 procflags, skipping spectral fitting