[Tue Aug 7 03:24:03 2012] Detection parameters: Position = (264.4, 381.6) = 14 42 27.77 -62 8 33.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 67.1 +/- 16.3 Background counts = 92.3 Rate = 0.008 +/- 0.002 [Tue Aug 7 03:24:04 2012] Off-axis axis estimate = 6.51' [Tue Aug 7 03:27:41 2012] Using EEF radius (= 9.68 ")to estimate initial spatial extent for simple fitting [Tue Aug 7 03:27:41 2012] Initial guess for spatial extent in simple fitting = 9.68" [Tue Aug 7 03:27:41 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.841 [Tue Aug 7 03:27:41 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 9.68" [Tue Aug 7 08:24:39 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src35.ximg exists [Tue Aug 7 08:24:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src35.csv [Tue Aug 7 08:24:39 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src35_1.ximg exists [Tue Aug 7 08:24:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src35.csv [Tue Aug 7 08:24:39 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src35_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Aug 7 08:24:42 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src35.ximg exists [Tue Aug 7 08:24:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src35.csv [Tue Aug 7 08:24:42 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists [Tue Aug 7 08:24:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src35.csv [Tue Aug 7 08:24:42 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src35_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Aug 7 20:58:20 2012] Spatial fit model total counts = 704.025000, observed total counts = 637.000000 [Tue Aug 7 20:58:20 2012] Poor agreement between spatial fit and data for source 35 It may help to tweak spatial fit manually Not incorporating fit results [Tue Aug 7 20:58:20 2012] Vigneting correction estimate = 1.000000 [Tue Aug 7 20:58:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Aug 7 20:58:20 2012] Assessing source extent using major [Tue Aug 7 20:58:20 2012] Source does appear to be extended [Tue Aug 7 20:58:20 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Aug 7 20:59:37 2012] Using EEF radius (= 9.68 ")to estimate initial spatial extent for simple fitting [Tue Aug 7 20:59:37 2012] Initial guess for spatial extent in simple fitting = 9.68" [Tue Aug 7 20:59:37 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.841 [Tue Aug 7 20:59:37 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 9.68" [Wed Aug 8 05:47:18 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src32.ximg exists [Wed Aug 8 05:47:18 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src32_1.ximg exists [Wed Aug 8 05:47:18 2012] Fit fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src32 appears to have run properly [Wed Aug 8 05:47:20 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src32.ximg exists [Wed Aug 8 05:47:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src32.csv [Wed Aug 8 05:47:21 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists [Wed Aug 8 05:47:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src32.csv [Wed Aug 8 05:47:21 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src32_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 8 22:57:24 2012] Source 35 is offset by 4.465254 and -7.054054 pixels which is larger than 2 X fitted extent = 1.174303 x 1.174303, not incorporating fit results [Wed Aug 8 22:57:24 2012] Source 35 is offset by -3.328976 and 5.883417 pixels which is larger than 2 X fitted extent = 1.113209 x 1.113209, not incorporating fit results [Wed Aug 8 22:57:25 2012] Vigneting correction estimate = 1.000000 [Wed Aug 8 22:57:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 8 22:57:25 2012] Assessing source extent using major [Wed Aug 8 22:57:25 2012] Source does appear to be extended [Wed Aug 8 22:57:25 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Aug 8 22:58:22 2012] XMMSAS src. selection expression = ellipse(22957.573120, 33149.317261, 652.500000, 652.500000, 0.000000, X, Y) [Wed Aug 8 22:58:22 2012] Writing source region out to fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src35_src.reg [Wed Aug 8 22:58:22 2012] Extracting stamp from image fullrun_pn_xmm0110011401_pi300-10000_cl_sm2.00.img.gz, (227, 344) - (302, 419) [Wed Aug 8 22:58:22 2012] XMMSAS bgd. selection expression = annulus(22957.573120, 33149.317261, 1087.500000, 2175.000000, X, Y) && !ellipse(22913.579285, 34496.471161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22395.846000, 34527.535400, 1624.144047, 1624.144047, 0.000000, X, Y) && !ellipse(23300.478000, 34548.934800, 1241.864036, 1241.864036, 0.000000, X, Y) && !ellipse(21081.226000, 34451.228000, 1670.544048, 1670.544048, 0.000000, X, Y) && !ellipse(20693.482285, 34006.273102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20217.606000, 34040.474000, 3341.088096, 3341.088096, 0.000000, X, Y) && !ellipse(25996.258600, 33604.400000, 1445.456042, 1445.456042, 0.000000, X, Y) && !ellipse(25314.698000, 33066.726000, 1455.288042, 1455.288042, 0.000000, X, Y) && !ellipse(24547.178986, 33084.805359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21630.062440, 32403.103400, 1553.816045, 1553.816045, 0.000000, X, Y) && !ellipse(24979.245178, 32589.974274, 870.000000, 870.000000, 0.000000, X, Y) [Wed Aug 8 22:58:22 2012] Writing fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src35.gif [Thu Aug 9 00:10:51 2012] Mean detx,y = (-1337.57, -6323.93) [Thu Aug 9 00:10:53 2012] Setting backscal keywords in source and bgd. spectrum [Thu Aug 9 00:11:10 2012] Binned source spectrum to 10 counts/bin [Thu Aug 9 00:11:10 2012] Setting source spectrum file to fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src35_src_b10.pi.gz [Thu Aug 9 00:11:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src35_bgd.pi.gz [Thu Aug 9 06:56:17 2012] Not generating rmf since there are only 67 counts [Thu Aug 9 06:56:17 2012] rmf not generated due to insufficient counts [Thu Aug 9 21:39:54 2012] Updating aperture counts using extracted products [Thu Aug 9 21:39:54 2012] Error reading totcts from fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src35_src_b10.pi.gz [Thu Aug 9 21:39:57 2012] Calculating source flux in energy range 0.30-8.00 [Thu Aug 9 21:39:57 2012] Using photon index=1.80, rate=0.00755, arf fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src35.arf [Thu Aug 9 21:39:57 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu Aug 9 21:39:57 2012] Updating source flux to 2.8e-14 [Thu Aug 9 22:00:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting