[Tue Aug  7 03:24:03 2012] Detection parameters:
  Position = (292.4, 382.2) = 14 42 10.42 -62 8 30.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 180.6 +/- 20.9
  Background counts = 88.6
  Rate = 0.02 +/- 0.002

[Tue Aug  7 03:24:04 2012] Off-axis axis estimate = 6.09'
[Tue Aug  7 03:27:41 2012] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 03:27:41 2012] Initial guess for spatial extent in simple fitting = 9.47"
[Tue Aug  7 03:27:41 2012] source mask rpix=2.2, npix_max = 28, mask sum = 22, frac = 0.767
[Tue Aug  7 03:27:41 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 9.47"
[Tue Aug  7 08:24:39 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src34.ximg exists
[Tue Aug  7 08:24:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src34.csv
[Tue Aug  7 08:24:39 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src34_1.ximg exists
[Tue Aug  7 08:24:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src34.csv
[Tue Aug  7 08:24:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 08:24:42 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Tue Aug  7 08:24:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src34.csv
[Tue Aug  7 08:24:42 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Tue Aug  7 08:24:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src34.csv
[Tue Aug  7 08:24:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 20:58:20 2012] Spatial fit model total counts = 921.414000, observed total counts = 765.000000
[Tue Aug  7 20:58:20 2012] Poor agreement between spatial fit and data for source 34
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug  7 20:58:20 2012] Spatial fit model total counts = 927.296000, observed total counts = 890.000000
[Tue Aug  7 20:58:20 2012] Offset between fit and detection position for source 34 = 1.874102 pixels
[Tue Aug  7 20:58:20 2012] Warning, changing simple spatial fit ID from 34 to 39
[Tue Aug  7 20:58:20 2012] 908.590000 total counts/ 763.293000 bgd. counts: snr = 5.259095
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 1.874102 pixels
  Position = (291.5, 380.5) = 14 42 10.96 -62 8 39.1
  Extent = 18.3 (18.1-18.4)", rotation angle = 0
  Source counts = 145.3 +/- 30.1
  Background counts = 763.3
  Rate = 0.01 +/- 0.003
[Tue Aug  7 20:58:20 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 20:58:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 20:58:20 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 20:58:20 2012] Source does appear to be extended
[Tue Aug  7 20:58:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 20:58:21 2012] Source is confused with source 33
[Tue Aug  7 20:59:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug  7 20:59:37 2012] Initial guess for spatial extent in simple fitting = 18.30"
[Tue Aug  7 20:59:37 2012] source mask rpix=4.2, npix_max = 88, mask sum = 43, frac = 0.485
[Tue Aug  7 20:59:37 2012] Skipping simple spatial due to low active detector fraction
[Wed Aug  8 22:57:24 2012] Spatial fit model total counts = 927.822000, observed total counts = 890.000000
[Wed Aug  8 22:57:24 2012] Offset between fit and detection position for source 34 = 0.106966 pixels
[Wed Aug  8 22:57:24 2012] Warning, changing simple spatial fit ID from -1 to 36
[Wed Aug  8 22:57:24 2012] 928.490000 total counts/ 764.750000 bgd. counts: snr = 5.921000
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.106966 pixels
  Position = (291.5, 380.6) = 14 42 10.96 -62 8 38.6
  Extent = 18.2 (17.7-18.4)", rotation angle = 0
  Source counts = 163.7 +/- 30.5
  Background counts = 764.8
  Rate = 0.02 +/- 0.003
[Wed Aug  8 22:57:25 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 22:57:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 22:57:25 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 22:57:25 2012] Source does appear to be extended
[Wed Aug  8 22:57:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 22:58:22 2012] XMMSAS src. selection expression = ellipse(25314.698000, 33066.726000, 1091.466031, 1091.466031, 0.000000, X, Y)
[Wed Aug  8 22:58:22 2012] Writing source region out to fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src34_src.reg
[Wed Aug  8 22:58:22 2012] Extracting stamp from image fullrun_pn_xmm0110011401_pi300-10000_cl_sm2.00.img.gz, (229, 318) - (354, 443)
[Wed Aug  8 22:58:22 2012] XMMSAS bgd. selection expression = annulus(25314.698000, 33066.726000, 1819.110052, 3638.220105, X, Y) && !ellipse(24564.418091, 28669.056213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21479.041400, 28871.719200, 1183.048034, 1183.048034, 0.000000, X, Y) && !ellipse(22535.222000, 28810.560600, 1345.096039, 1345.096039, 0.000000, X, Y) && !ellipse(23248.511230, 28660.042389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22913.579285, 34496.471161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22395.846000, 34527.535400, 1624.144047, 1624.144047, 0.000000, X, Y) && !ellipse(23300.478000, 34548.934800, 1241.864036, 1241.864036, 0.000000, X, Y) && !ellipse(21081.226000, 34451.228000, 1670.544048, 1670.544048, 0.000000, X, Y) && !ellipse(20217.606000, 34040.474000, 3341.088096, 3341.088096, 0.000000, X, Y) && !ellipse(29638.101200, 33758.345600, 1593.376046, 1593.376046, 0.000000, X, Y) && !ellipse(25996.258600, 33604.400000, 1445.456042, 1445.456042, 0.000000, X, Y) && !ellipse(22957.573120, 33149.317261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24547.178986, 33084.805359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26069.599335, 32589.209625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26655.628021, 32657.749207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21630.062440, 32403.103400, 1553.816045, 1553.816045, 0.000000, X, Y) && !ellipse(24979.245178, 32589.974274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22059.292000, 28741.164600, 805.624023, 805.624023, 0.000000, X, Y) && !ellipse(20705.460000, 29062.712000, 1470.272042, 1470.272042, 0.000000, X, Y) && !ellipse(21804.809845, 28832.778595, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug  8 22:58:22 2012] Writing fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src34.gif
[Thu Aug  9 00:10:07 2012] Mean detx,y = (930.16, -5365.52) 
[Thu Aug  9 00:10:09 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 00:10:44 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 00:10:45 2012] Setting source spectrum file to fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Thu Aug  9 00:10:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Thu Aug  9 21:39:54 2012] Updating aperture counts using extracted products
[Thu Aug  9 21:39:54 2012] Error reading totcts from fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Thu Aug  9 21:39:56 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 21:39:56 2012] Using photon index=1.80, rate=0.0167, arf fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src34.arf
[Thu Aug  9 21:39:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 21:39:57 2012] Updating source flux to 6.6e-14
[Thu Aug  9 22:00:41 2012] Flag p found in src. 34 procflags, skipping spectral fitting
[Thu Aug  9 22:00:41 2012] Flag c found in src. 34 procflags, skipping spectral fitting