[Tue Aug  7 03:24:03 2012] Detection parameters:
  Position = (299.1, 382.0) = 14 42 6.27 -62 8 33.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.5 +/- 18.8
  Background counts = 89.3
  Rate = 0.01 +/- 0.002

[Tue Aug  7 03:24:04 2012] Off-axis axis estimate = 6.06'
[Tue Aug  7 03:27:41 2012] Using EEF radius (= 9.46 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 03:27:41 2012] Initial guess for spatial extent in simple fitting = 9.46"
[Tue Aug  7 03:27:41 2012] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.259
[Tue Aug  7 03:27:41 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 9.46"
[Tue Aug  7 08:24:39 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src33.ximg exists
[Tue Aug  7 08:24:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src33.csv
[Tue Aug  7 08:24:39 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src33_1.ximg exists
[Tue Aug  7 08:24:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src33.csv
[Tue Aug  7 08:24:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 08:24:42 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Tue Aug  7 08:24:42 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Tue Aug  7 08:24:42 2012] Fit fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Tue Aug  7 20:58:20 2012] Spatial fit model total counts = 911.279000, observed total counts = 899.000000
[Tue Aug  7 20:58:20 2012] Offset between fit and detection position for source 33 = 4.834089 pixels
[Tue Aug  7 20:58:20 2012] 750.858000 total counts/ 567.823000 bgd. counts: snr = 7.681175
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 4.834089 pixels
  Position = (299.4, 386.8) = 14 42 6.09 -62 8 11.8
  Extent = 18.1 (16.4-18.9)", rotation angle = 0
  Source counts = 183.0 +/- 27.4
  Background counts = 567.8
  Rate = 0.02 +/- 0.003
[Tue Aug  7 20:58:20 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 20:58:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 20:58:20 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 20:58:20 2012] Source does appear to be extended
[Tue Aug  7 20:58:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 20:58:21 2012] Source is confused with source 34
[Tue Aug  7 20:58:21 2012] Source is confused with source 39
[Tue Aug  7 20:59:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug  7 20:59:37 2012] Initial guess for spatial extent in simple fitting = 18.07"
[Tue Aug  7 20:59:37 2012] source mask rpix=4.2, npix_max = 86, mask sum = 81, frac = 0.935
[Tue Aug  7 20:59:37 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 18.07"
[Wed Aug  8 05:47:18 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src31.ximg exists
[Wed Aug  8 05:47:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src31.csv
[Wed Aug  8 05:47:18 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src31_1.ximg exists
[Wed Aug  8 05:47:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src31.csv
[Wed Aug  8 05:47:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 05:47:20 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Wed Aug  8 05:47:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src31.csv
[Wed Aug  8 05:47:20 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Wed Aug  8 05:47:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src31.csv
[Wed Aug  8 05:47:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 22:57:24 2012] Warning, spatial fit 31 centroid is now closest to src. 40
[Wed Aug  8 22:57:25 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 22:57:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 22:57:25 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 22:57:25 2012] Source does appear to be extended
[Wed Aug  8 22:57:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 22:58:22 2012] XMMSAS src. selection expression = ellipse(25996.258600, 33604.400000, 1084.092031, 1084.092031, 0.000000, X, Y)
[Wed Aug  8 22:58:22 2012] Writing source region out to fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src33_src.reg
[Wed Aug  8 22:58:22 2012] Extracting stamp from image fullrun_pn_xmm0110011401_pi300-10000_cl_sm2.00.img.gz, (237, 325) - (362, 449)
[Wed Aug  8 22:58:22 2012] XMMSAS bgd. selection expression = annulus(25996.258600, 33604.400000, 1806.820052, 3613.640104, X, Y) && !ellipse(21479.041400, 28871.719200, 1183.048034, 1183.048034, 0.000000, X, Y) && !ellipse(22535.222000, 28810.560600, 1345.096039, 1345.096039, 0.000000, X, Y) && !ellipse(22913.579285, 34496.471161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22395.846000, 34527.535400, 1624.144047, 1624.144047, 0.000000, X, Y) && !ellipse(23300.478000, 34548.934800, 1241.864036, 1241.864036, 0.000000, X, Y) && !ellipse(21081.226000, 34451.228000, 1670.544048, 1670.544048, 0.000000, X, Y) && !ellipse(20217.606000, 34040.474000, 3341.088096, 3341.088096, 0.000000, X, Y) && !ellipse(29638.101200, 33758.345600, 1593.376046, 1593.376046, 0.000000, X, Y) && !ellipse(25314.698000, 33066.726000, 1455.288042, 1455.288042, 0.000000, X, Y) && !ellipse(22957.573120, 33149.317261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24547.178986, 33084.805359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26069.599335, 32589.209625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26655.628021, 32657.749207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21630.062440, 32403.103400, 1553.816045, 1553.816045, 0.000000, X, Y) && !ellipse(24979.245178, 32589.974274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30197.649506, 29423.007538, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug  8 22:58:22 2012] Writing fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src33.gif
[Thu Aug  9 00:09:24 2012] Mean detx,y = (1620.25, -5516.33) 
[Thu Aug  9 00:09:26 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 00:10:00 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 00:10:00 2012] Setting source spectrum file to fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Thu Aug  9 00:10:00 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Thu Aug  9 21:39:54 2012] Updating aperture counts using extracted products
[Thu Aug  9 21:39:54 2012] Error reading totcts from fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Thu Aug  9 21:39:56 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 21:39:56 2012] Using photon index=1.80, rate=0.0187, arf fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src33.arf
[Thu Aug  9 21:39:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 21:39:56 2012] Updating source flux to 5.9e-14
[Thu Aug  9 22:00:41 2012] Flag c found in src. 33 procflags, skipping spectral fitting