[Tue Aug 7 03:24:03 2012] Detection parameters: Position = (212.2, 391.0) = 14 43 0.18 -62 7 52.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 74.2 +/- 16.0 Background counts = 74.4 Rate = 0.005 +/- 0.001 [Tue Aug 7 03:24:04 2012] Off-axis axis estimate = 9.18' [Tue Aug 7 03:27:41 2012] Using EEF radius (= 11.02 ")to estimate initial spatial extent for simple fitting [Tue Aug 7 03:27:41 2012] Initial guess for spatial extent in simple fitting = 11.02" [Tue Aug 7 03:27:41 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.979 [Tue Aug 7 03:27:41 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 11.02" [Tue Aug 7 08:24:39 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src29.ximg exists [Tue Aug 7 08:24:39 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src29_1.ximg exists [Tue Aug 7 08:24:39 2012] Fit fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src29 appears to have run properly [Tue Aug 7 08:24:42 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src29.ximg exists [Tue Aug 7 08:24:42 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists [Tue Aug 7 08:24:42 2012] Fit fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly [Tue Aug 7 20:58:20 2012] Source 29 is offset by 0.171215 and 6.030117 pixels which is larger than 2 X fitted extent = 1.247926 x 1.247926, not incorporating fit results [Tue Aug 7 20:58:20 2012] Spatial fit model total counts = 490.722000, observed total counts = 472.000000 [Tue Aug 7 20:58:20 2012] Offset between fit and detection position for source 29 = 4.621969 pixels [Tue Aug 7 20:58:20 2012] 464.885000 total counts/ 227.833000 bgd. counts: snr = 15.704905 Spatial fit parameters: Offset between fit and detection position for source 29 = 4.621969 pixels Position = (216.7, 392.1) = 14 42 57.38 -62 7 48.2 Extent = 22.0 (22.0-44.1)", rotation angle = 0 Source counts = 237.1 +/- 21.6 Background counts = 227.8 Rate = 0.02 +/- 0.002 [Tue Aug 7 20:58:20 2012] Vigneting correction estimate = 1.000000 [Tue Aug 7 20:58:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Aug 7 20:58:20 2012] Assessing source extent using major axis lower bound [Tue Aug 7 20:58:20 2012] Source does appear to be extended [Tue Aug 7 20:58:20 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Aug 7 20:58:21 2012] Source is confused with source 27 [Tue Aug 7 20:59:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Tue Aug 7 20:59:37 2012] Initial guess for spatial extent in simple fitting = 22.03" [Tue Aug 7 20:59:37 2012] source mask rpix=5.1, npix_max = 123, mask sum = 121, frac = 0.977 [Tue Aug 7 20:59:37 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 22.03" [Wed Aug 8 05:47:18 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src29.ximg exists [Wed Aug 8 05:47:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src29.csv [Wed Aug 8 05:47:18 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src29_1.ximg exists [Wed Aug 8 05:47:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src29.csv [Wed Aug 8 05:47:18 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src29_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 8 05:47:20 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src29.ximg exists [Wed Aug 8 05:47:20 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists [Wed Aug 8 05:47:20 2012] Fit fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly [Wed Aug 8 22:57:24 2012] Warning, spatial fit 29 centroid is now closest to src. 27 [Wed Aug 8 22:57:25 2012] Vigneting correction estimate = 1.000000 [Wed Aug 8 22:57:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 8 22:57:25 2012] Assessing source extent using major axis lower bound [Wed Aug 8 22:57:25 2012] Source does appear to be extended [Wed Aug 8 22:57:25 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Aug 8 22:58:22 2012] XMMSAS src. selection expression = ellipse(18803.308000, 34064.456380, 1321.932038, 1321.932038, 0.000000, X, Y) [Wed Aug 8 22:58:22 2012] Writing source region out to fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src29_src.reg [Wed Aug 8 22:58:22 2012] Extracting stamp from image fullrun_pn_xmm0110011401_pi300-10000_cl_sm2.00.img.gz, (141, 316) - (293, 468) [Wed Aug 8 22:58:22 2012] XMMSAS bgd. selection expression = annulus(18803.308000, 34064.456380, 2203.220063, 4406.440127, X, Y) && !ellipse(21479.041400, 28871.719200, 1183.048034, 1183.048034, 0.000000, X, Y) && !ellipse(22535.222000, 28810.560600, 1345.096039, 1345.096039, 0.000000, X, Y) && !ellipse(15676.844254, 28929.875671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22913.579285, 34496.471161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22395.846000, 34527.535400, 1624.144047, 1624.144047, 0.000000, X, Y) && !ellipse(23300.478000, 34548.934800, 1241.864036, 1241.864036, 0.000000, X, Y) && !ellipse(21081.226000, 34451.228000, 1670.544048, 1670.544048, 0.000000, X, Y) && !ellipse(20693.482285, 34006.273102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19282.116501, 34219.490540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20217.606000, 34040.474000, 3341.088096, 3341.088096, 0.000000, X, Y) && !ellipse(22957.573120, 33149.317261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21630.062440, 32403.103400, 1553.816045, 1553.816045, 0.000000, X, Y) && !ellipse(15341.117600, 30790.304000, 1796.904052, 1796.904052, 0.000000, X, Y) && !ellipse(17220.490234, 29560.190247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19400.366000, 29438.820200, 1470.272042, 1470.272042, 0.000000, X, Y) && !ellipse(17952.099487, 29541.546631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20153.875458, 29186.683380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14733.141968, 29194.669708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20705.460000, 29062.712000, 1470.272042, 1470.272042, 0.000000, X, Y) && !ellipse(18854.731125, 29258.379791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18014.517899, 28938.642578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16714.914246, 29003.855408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21804.809845, 28832.778595, 870.000000, 870.000000, 0.000000, X, Y) [Wed Aug 8 22:58:22 2012] Writing fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src29.gif [Thu Aug 9 00:07:19 2012] Mean detx,y = (-4725.11, -8512.57) [Thu Aug 9 00:07:21 2012] Setting backscal keywords in source and bgd. spectrum [Thu Aug 9 00:08:16 2012] Binned source spectrum to 10 counts/bin [Thu Aug 9 00:08:16 2012] Setting source spectrum file to fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src29_src_b10.pi.gz [Thu Aug 9 00:08:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src29_bgd.pi.gz [Thu Aug 9 21:39:54 2012] Updating aperture counts using extracted products [Thu Aug 9 21:39:54 2012] Error reading totcts from fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src29_src_b10.pi.gz [Thu Aug 9 21:39:56 2012] Calculating source flux in energy range 0.30-8.00 [Thu Aug 9 21:39:56 2012] Using photon index=1.80, rate=0.0242, arf fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src29.arf [Thu Aug 9 21:39:56 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu Aug 9 21:39:56 2012] Updating source flux to 1.1e-13 [Thu Aug 9 22:00:41 2012] Flag b found in src. 29 procflags, skipping spectral fitting [Thu Aug 9 22:00:41 2012] Flag c found in src. 29 procflags, skipping spectral fitting