[Tue Aug 7 03:25:36 2012] Detection parameters: Position = (380.0, 299.9) = 14 41 15.88 -62 14 30.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 325.0 +/- 25.0 Background counts = 51.7 Rate = 0.02 +/- 0.002 [Tue Aug 7 03:25:38 2012] Off-axis axis estimate = 5.91' [Tue Aug 7 14:53:08 2012] Using EEF radius (= 9.39 ")to estimate initial spatial extent for simple fitting [Tue Aug 7 14:53:08 2012] Initial guess for spatial extent in simple fitting = 9.39" [Tue Aug 7 14:53:08 2012] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.274 [Tue Aug 7 14:53:08 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 9.39" [Tue Aug 7 20:57:48 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src7.ximg exists [Tue Aug 7 20:57:48 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src7_1.ximg exists [Tue Aug 7 20:57:48 2012] Fit fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src7 appears to have run properly [Tue Aug 7 20:57:50 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists [Tue Aug 7 20:57:50 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists [Tue Aug 7 20:57:50 2012] Fit fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly [Tue Aug 7 20:59:04 2012] Spatial fit model total counts = 1658.090000, observed total counts = 1657.000000 [Tue Aug 7 20:59:04 2012] Offset between fit and detection position for source 9 = 2.592373 pixels [Tue Aug 7 20:59:04 2012] 1546.621000 total counts/ 637.483000 bgd. counts: snr = 36.007710 Spatial fit parameters: Offset between fit and detection position for source 9 = 2.592373 pixels Position = (382.3, 298.8) = 14 41 14.43 -62 14 34.1 Extent = 18.8 (18.7-18.8)", rotation angle = 0 Source counts = 909.1 +/- 39.3 Background counts = 637.5 Rate = 0.05 +/- 0.002 [Tue Aug 7 20:59:04 2012] Vigneting correction estimate = 1.000000 [Tue Aug 7 20:59:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Aug 7 20:59:04 2012] Assessing source extent using major axis lower bound [Tue Aug 7 20:59:04 2012] Source does appear to be extended [Tue Aug 7 20:59:04 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Aug 7 20:59:04 2012] Source is confused with source 74 [Wed Aug 8 12:37:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Aug 8 12:37:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Aug 8 12:37:34 2012] Initial guess for spatial extent in simple fitting = 18.76" [Wed Aug 8 12:37:34 2012] source mask rpix=4.3, npix_max = 92, mask sum = 90, frac = 0.971 [Wed Aug 8 12:37:34 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 18.76" [Wed Aug 8 22:56:55 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src7.ximg exists [Wed Aug 8 22:56:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src7.csv [Wed Aug 8 22:56:55 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src7_1.ximg exists [Wed Aug 8 22:56:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src7.csv [Wed Aug 8 22:56:55 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src7_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 8 22:56:57 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists [Wed Aug 8 22:56:57 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists [Wed Aug 8 22:56:57 2012] Fit fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly [Wed Aug 8 22:57:58 2012] Warning, spatial fit 7 centroid is now closest to src. 67 [Wed Aug 8 22:57:59 2012] Spatial fit model total counts = 1081.370000, observed total counts = 1019.000000 [Wed Aug 8 22:57:59 2012] Offset between fit and detection position for source 9 = 1.616054 pixels [Wed Aug 8 22:57:59 2012] Warning, changing simple spatial fit ID from 7 to 52 [Wed Aug 8 22:57:59 2012] 958.106800 total counts/ 870.858000 bgd. counts: snr = 2.956554 Spatial fit parameters: Offset between fit and detection position for source 9 = 1.616054 pixels Position = (380.8, 299.2) = 14 41 15.40 -62 14 32.4 Extent = 19.3 (7.7-38.5)" x 5.8 (2.4-12.6)", rotation angle = 10 Source counts = 87.2 +/- 31.0 Background counts = 870.9 Rate = 0.005 +/- 0.002 [Wed Aug 8 22:57:59 2012] Vigneting correction estimate = 1.000000 [Wed Aug 8 22:57:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 8 22:57:59 2012] Assessing source extent using major axis lower bound [Wed Aug 8 22:57:59 2012] Source does appear to be extended [Wed Aug 8 22:57:59 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.61 [Thu Aug 9 17:43:29 2012] XMMSAS src. selection expression = ellipse(33078.344000, 25978.804000, 1156.188033, 348.829210, 10.424100, X, Y) [Thu Aug 9 17:43:29 2012] Writing source region out to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src9_src.reg [Thu Aug 9 17:43:29 2012] Extracting stamp from image fullrun_mos2_xmm0110011401_pi300-10000_cl_sm2.00.img.gz, (314, 233) - (447, 366) [Thu Aug 9 17:43:29 2012] XMMSAS bgd. selection expression = annulus(33078.344000, 25978.804000, 1926.980055, 3853.960111, X, Y) && !ellipse(28538.432000, 26987.014000, 738.140021, 738.140021, 0.000000, X, Y) && !ellipse(28495.162000, 27021.816000, 1204.320035, 1204.320035, 0.000000, X, Y) && !ellipse(30274.600000, 26487.106200, 1320.000038, 751.662422, 16.101600, X, Y) && !ellipse(31422.631357, 26291.051119, 2071.664060, 805.533995, 6.504509, X, Y) && !ellipse(30627.530000, 26435.682000, 1376.880040, 508.940015, 12.328900, X, Y) && !ellipse(36903.558000, 24974.858000, 1887.912054, 1887.912054, 0.000000, X, Y) && !ellipse(35692.892600, 25483.876000, 1687.528049, 1687.528049, 0.000000, X, Y) && !ellipse(35827.694000, 25367.250000, 1716.504049, 1716.504049, 0.000000, X, Y) && !ellipse(38323.742000, 24315.720000, 3968.576114, 3968.576114, 0.000000, X, Y) && !ellipse(32350.236000, 26724.050000, 653.728019, 653.728019, 0.000000, X, Y) && !ellipse(38068.766000, 24507.590000, 2402.584069, 2402.584069, 0.000000, X, Y) && !ellipse(31043.663971, 26914.931458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31268.967102, 27457.104370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36605.836000, 26665.838000, 1716.504049, 1716.504049, 0.000000, X, Y) && !ellipse(33575.863647, 26646.717743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29006.675049, 27526.939606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30252.332489, 27529.830933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29494.637573, 27342.356659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35186.274323, 26393.425293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32921.908000, 28839.479600, 2965.760085, 2965.760085, 0.000000, X, Y) && !ellipse(33871.976410, 28028.907410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32432.190000, 28654.684200, 1482.880043, 466.695213, 328.764000, X, Y) [Thu Aug 9 17:43:29 2012] Writing fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src9.gif [Thu Aug 9 17:45:26 2012] Mean detx,y = (-5560.43, -4032.92) [Thu Aug 9 17:45:27 2012] Setting backscal keywords in source and bgd. spectrum [Thu Aug 9 17:45:54 2012] Binned source spectrum to 10 counts/bin [Thu Aug 9 17:45:54 2012] Setting source spectrum file to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src9_src_b10.pi.gz [Thu Aug 9 17:45:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src9_bgd.pi.gz [Thu Aug 9 19:06:36 2012] Not generating rmf since there are only 87 counts [Thu Aug 9 19:06:36 2012] rmf not generated due to insufficient counts [Thu Aug 9 21:40:04 2012] Updating aperture counts using extracted products [Thu Aug 9 21:40:04 2012] Error reading totcts from fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src9_src_b10.pi.gz [Thu Aug 9 21:40:06 2012] Calculating source flux in energy range 0.30-8.00 [Thu Aug 9 21:40:06 2012] Using photon index=1.80, rate=0.00485, arf fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src9.arf [Thu Aug 9 21:40:06 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu Aug 9 21:40:06 2012] Updating source flux to 6.6e-14 [Thu Aug 9 21:50:23 2012] Flag c found in src. 9 procflags, skipping spectral fitting [Thu Aug 9 21:50:23 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting