[Tue Aug  7 03:25:37 2012] Detection parameters:
  Position = (376.9, 331.8) = 14 41 17.89 -62 12 11.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.1 +/- 12.4
  Background counts = 41.8
  Rate = 0.003 +/- 0.0009

[Tue Aug  7 03:25:38 2012] Off-axis axis estimate = 6.18'
[Tue Aug  7 14:53:08 2012] Using EEF radius (= 9.52 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 14:53:08 2012] Initial guess for spatial extent in simple fitting = 9.52"
[Tue Aug  7 14:53:08 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.038
[Tue Aug  7 14:53:08 2012] Giving source the simple spatial ID 81 for pass 0, mean size = 9.52"
[Tue Aug  7 20:57:50 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src81.ximg exists
[Tue Aug  7 20:57:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src81.csv
[Tue Aug  7 20:57:50 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src81_1.ximg exists
[Tue Aug  7 20:57:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src81.csv
[Tue Aug  7 20:57:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 20:57:53 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Tue Aug  7 20:57:53 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Tue Aug  7 20:57:53 2012] Fit fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src81 appears to have run properly
[Tue Aug  7 20:59:04 2012] Spatial fit model total counts = 614.413000, observed total counts = 610.000000
[Tue Aug  7 20:59:04 2012] Offset between fit and detection position for source 63 = 3.140019 pixels
[Tue Aug  7 20:59:04 2012] Warning, changing simple spatial fit ID from 81 to 77
[Tue Aug  7 20:59:04 2012] 606.001000 total counts/ 467.289000 bgd. counts: snr = 6.416841
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 3.140019 pixels
  Position = (374.1, 330.3) = 14 41 19.62 -62 12 17.0
  Extent = 18.5 (18.5-37.1)", rotation angle = 0
  Source counts = 138.7 +/- 24.6
  Background counts = 467.3
  Rate = 0.008 +/- 0.001
[Tue Aug  7 20:59:04 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 20:59:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 20:59:04 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 20:59:04 2012] Source does appear to be extended
[Tue Aug  7 20:59:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 20:59:04 2012] Source is confused with source 66
[Wed Aug  8 12:37:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  8 12:37:34 2012] Initial guess for spatial extent in simple fitting = 18.54"
[Wed Aug  8 12:37:34 2012] source mask rpix=4.3, npix_max = 90, mask sum = 90, frac = 0.993
[Wed Aug  8 12:37:34 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 18.54"
[Wed Aug  8 22:56:57 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src71.ximg exists
[Wed Aug  8 22:56:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src71.csv
[Wed Aug  8 22:56:57 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src71_1.ximg exists
[Wed Aug  8 22:56:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src71.csv
[Wed Aug  8 22:56:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 22:56:59 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Wed Aug  8 22:56:59 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Wed Aug  8 22:56:59 2012] Fit fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src71 appears to have run properly
[Wed Aug  8 22:57:59 2012] Spatial fit model total counts = 611.024000, observed total counts = 610.000000
[Wed Aug  8 22:57:59 2012] Offset between fit and detection position for source 63 = 0.853404 pixels
[Wed Aug  8 22:57:59 2012] Warning, changing simple spatial fit ID from 71 to 68
[Wed Aug  8 22:57:59 2012] 609.765800 total counts/ 538.264000 bgd. counts: snr = 3.081905
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 0.853404 pixels
  Position = (373.3, 329.9) = 14 41 20.09 -62 12 18.8
  Extent = 18.5 (5.0-37.1)" x 5.8 (2.5-11.4)", rotation angle = 329 (312-345) degrees
  Source counts = 71.5 +/- 24.7
  Background counts = 538.3
  Rate = 0.004 +/- 0.001
[Wed Aug  8 22:57:59 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 22:57:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 22:57:59 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 22:57:59 2012] Source does appear to be extended
[Wed Aug  8 22:57:59 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.44
[Thu Aug  9 17:43:33 2012] XMMSAS src. selection expression = ellipse(32432.190000, 28654.684200, 1112.160032, 350.021410, 328.764000, X, Y)
[Thu Aug  9 17:43:33 2012] Writing source region out to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src63_src.reg
[Thu Aug  9 17:43:33 2012] Extracting stamp from image fullrun_mos2_xmm0110011401_pi300-10000_cl_sm2.00.img.gz, (309, 266) - (437, 394)
[Thu Aug  9 17:43:33 2012] XMMSAS bgd. selection expression = annulus(32432.190000, 28654.684200, 1853.600053, 3707.200107, X, Y) && !ellipse(27909.732000, 27358.770000, 1173.784034, 909.360026, 73.168000, X, Y) && !ellipse(28538.432000, 26987.014000, 738.140021, 738.140021, 0.000000, X, Y) && !ellipse(28495.162000, 27021.816000, 1204.320035, 1204.320035, 0.000000, X, Y) && !ellipse(33078.344000, 25978.804000, 1541.584044, 465.105613, 10.424100, X, Y) && !ellipse(30274.600000, 26487.106200, 1320.000038, 751.662422, 16.101600, X, Y) && !ellipse(31422.631357, 26291.051119, 2071.664060, 805.533995, 6.504509, X, Y) && !ellipse(30627.530000, 26435.682000, 1376.880040, 508.940015, 12.328900, X, Y) && !ellipse(36903.558000, 24974.858000, 1887.912054, 1887.912054, 0.000000, X, Y) && !ellipse(35692.892600, 25483.876000, 1687.528049, 1687.528049, 0.000000, X, Y) && !ellipse(35827.694000, 25367.250000, 1716.504049, 1716.504049, 0.000000, X, Y) && !ellipse(38323.742000, 24315.720000, 3968.576114, 3968.576114, 0.000000, X, Y) && !ellipse(32350.236000, 26724.050000, 653.728019, 653.728019, 0.000000, X, Y) && !ellipse(38068.766000, 24507.590000, 2402.584069, 2402.584069, 0.000000, X, Y) && !ellipse(31043.663971, 26914.931458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31268.967102, 27457.104370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36605.836000, 26665.838000, 1716.504049, 1716.504049, 0.000000, X, Y) && !ellipse(33575.863647, 26646.717743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29006.675049, 27526.939606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31851.424774, 33091.599579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30252.332489, 27529.830933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29494.637573, 27342.356659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35186.274323, 26393.425293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32921.908000, 28839.479600, 2965.760085, 2965.760085, 0.000000, X, Y) && !ellipse(33871.976410, 28028.907410, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug  9 17:43:33 2012] Writing fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src63.gif
[Thu Aug  9 18:37:03 2012] Mean detx,y = (-5874.35, -1312.19) 
[Thu Aug  9 18:37:06 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 18:37:28 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 18:37:28 2012] Setting source spectrum file to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Thu Aug  9 18:37:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Thu Aug  9 21:30:06 2012] Not generating rmf since there are only 71 counts
[Thu Aug  9 21:30:06 2012] rmf not generated due to insufficient counts
[Thu Aug  9 21:40:06 2012] Updating aperture counts using extracted products
[Thu Aug  9 21:40:06 2012] Error reading totcts from fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Thu Aug  9 21:40:08 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 21:40:08 2012] Using photon index=1.80, rate=0.00397, arf fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src63.arf
[Thu Aug  9 21:40:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 21:40:08 2012] Updating source flux to 5.6e-14
[Thu Aug  9 21:50:23 2012] Flag c found in src. 63 procflags, skipping spectral fitting
[Thu Aug  9 21:50:23 2012] Source 63 has fewer than 100.000000 counts, skipping spectral fitting