[Tue Aug  7 03:25:37 2012] Detection parameters:
  Position = (412.4, 188.0) = 14 40 55.39 -62 22 35.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.9 +/- 17.0
  Background counts = 31.4
  Rate = 0.006 +/- 0.0009

[Tue Aug  7 03:25:38 2012] Off-axis axis estimate = 11.51'
[Tue Aug  7 14:53:08 2012] Using EEF radius (= 12.18 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 14:53:08 2012] Initial guess for spatial extent in simple fitting = 12.18"
[Tue Aug  7 14:53:08 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.964
[Tue Aug  7 14:53:08 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 12.18"
[Tue Aug  7 20:57:49 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src53.ximg exists
[Tue Aug  7 20:57:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src53.csv
[Tue Aug  7 20:57:49 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src53_1.ximg exists
[Tue Aug  7 20:57:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src53.csv
[Tue Aug  7 20:57:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 20:57:53 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Tue Aug  7 20:57:53 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Tue Aug  7 20:57:53 2012] Fit fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Tue Aug  7 20:59:04 2012] Warning, spatial fit 53 centroid is now closest to src. 86
[Tue Aug  7 20:59:04 2012] Warning: source 85 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 20.970435 pixels away
[Tue Aug  7 20:59:04 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 20:59:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 20:59:04 2012] Assessing source extent using major
[Tue Aug  7 20:59:04 2012] Source does appear to be extended
[Tue Aug  7 20:59:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 20:59:04 2012] Source is confused with source 1
[Wed Aug  8 12:37:34 2012] Using EEF radius (= 12.18 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 12:37:34 2012] Initial guess for spatial extent in simple fitting = 12.18"
[Wed Aug  8 12:37:34 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.964
[Wed Aug  8 12:37:34 2012] Giving source the simple spatial ID 47 for pass 1, mean size = 12.18"
[Wed Aug  8 22:56:56 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src47.ximg exists
[Wed Aug  8 22:56:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src47.csv
[Wed Aug  8 22:56:57 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src47_1.ximg exists
[Wed Aug  8 22:56:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src47.csv
[Wed Aug  8 22:56:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 22:56:58 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Wed Aug  8 22:56:58 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Wed Aug  8 22:56:58 2012] Fit fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Wed Aug  8 22:57:59 2012] Spatial fit model total counts = 1391.600000, observed total counts = 1380.000000
[Wed Aug  8 22:57:59 2012] Offset between fit and detection position for source 45 = 9.974777 pixels
[Wed Aug  8 22:57:59 2012] Warning, changing simple spatial fit ID from 47 to 30
[Wed Aug  8 22:57:59 2012] 944.106000 total counts/ 840.483000 bgd. counts: snr = 3.574306
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 9.974777 pixels
  Position = (403.9, 182.7) = 14 41 0.69 -62 22 58.5
  Extent = 25.2 (25.2-25.2)", rotation angle = 0
  Source counts = 103.6 +/- 30.7
  Background counts = 840.5
  Rate = 0.006 +/- 0.002
[Wed Aug  8 22:57:59 2012] Source 45 is offset by -2.127839 and 7.781793 pixels which is larger than
2 X fitted extent = 1.495172 x 1.495172, not incorporating fit results
[Wed Aug  8 22:57:59 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 22:57:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 22:57:59 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 22:57:59 2012] Source does appear to be extended
[Wed Aug  8 22:57:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 17:43:31 2012] XMMSAS src. selection expression = ellipse(35091.738000, 15850.156000, 1511.844044, 1511.844044, 0.000000, X, Y)
[Thu Aug  9 17:43:31 2012] Writing source region out to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src45_src.reg
[Thu Aug  9 17:43:31 2012] Extracting stamp from image fullrun_mos2_xmm0110011401_pi300-10000_cl_sm2.00.img.gz, (317, 96) - (491, 270)
[Thu Aug  9 17:43:31 2012] XMMSAS bgd. selection expression = annulus(35091.738000, 15850.156000, 2519.740073, 5039.480145, X, Y) && !ellipse(36427.113600, 15358.748000, 2052.112059, 1419.112041, 249.017000, X, Y) && !ellipse(37010.512600, 14763.928200, 1435.056041, 1435.056041, 0.000000, X, Y) && !ellipse(38323.742000, 24315.720000, 3968.576114, 3968.576114, 0.000000, X, Y) && !ellipse(35695.568000, 18978.130000, 1876.112054, 1876.112054, 0.000000, X, Y) && !ellipse(36801.608000, 14785.582000, 2625.648076, 2625.648076, 0.000000, X, Y) && !ellipse(35850.028992, 17529.325897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36135.864136, 15184.439865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37243.258270, 13555.600632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37082.366150, 14064.256454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35142.163666, 18660.729462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35448.586084, 20081.802000, 912.616026, 912.616026, 0.000000, X, Y) && !ellipse(36295.431396, 18575.108749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36333.963837, 14049.602020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36162.839233, 19736.105270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33694.163788, 12183.578400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35461.540000, 17072.386000, 1949.024056, 1949.024056, 0.000000, X, Y)
[Thu Aug  9 17:43:31 2012] Writing fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src45.gif
[Thu Aug  9 18:24:44 2012] Mean detx,y = (-4389.08, -14350.98) 
[Thu Aug  9 18:24:46 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 18:25:51 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 18:25:51 2012] Setting source spectrum file to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Thu Aug  9 18:25:51 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Thu Aug  9 21:40:05 2012] Updating aperture counts using extracted products
[Thu Aug  9 21:40:05 2012] Error reading totcts from fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Thu Aug  9 21:40:07 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 21:40:07 2012] Using photon index=1.80, rate=0.00576, arf fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src45.arf
[Thu Aug  9 21:40:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 21:40:07 2012] Updating source flux to 1.1e-13
[Thu Aug  9 21:50:23 2012] Flag b found in src. 45 procflags, skipping spectral fitting
[Thu Aug  9 21:50:23 2012] Flag c found in src. 45 procflags, skipping spectral fitting