[Tue Aug  7 03:25:37 2012] Detection parameters:
  Position = (460.2, 267.1) = 14 40 25.80 -62 16 50.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 144.7 +/- 16.7
  Background counts = 18.2
  Rate = 0.008 +/- 0.0009

[Tue Aug  7 03:25:38 2012] Off-axis axis estimate = 11.95'
[Tue Aug  7 14:53:08 2012] Using EEF radius (= 12.40 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 14:53:08 2012] Initial guess for spatial extent in simple fitting = 12.40"
[Tue Aug  7 14:53:08 2012] source mask rpix=2.9, npix_max = 44, mask sum = 42, frac = 0.935
[Tue Aug  7 14:53:08 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 12.40"
[Tue Aug  7 20:57:49 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src39.ximg exists
[Tue Aug  7 20:57:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src39.csv
[Tue Aug  7 20:57:49 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src39_1.ximg exists
[Tue Aug  7 20:57:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src39.csv
[Tue Aug  7 20:57:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 20:57:52 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Tue Aug  7 20:57:52 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Tue Aug  7 20:57:52 2012] Fit fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Tue Aug  7 20:59:04 2012] Spatial fit model total counts = 555.950000, observed total counts = 555.000000
[Tue Aug  7 20:59:04 2012] Offset between fit and detection position for source 39 = 7.531942 pixels
[Tue Aug  7 20:59:04 2012] 546.355310 total counts/ 4.419310 bgd. counts: snr = 257.792791
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 7.531942 pixels
  Position = (455.0, 272.6) = 14 40 29.05 -62 16 26.4
  Extent = 24.8 (24.7-49.6)", rotation angle = 0
  Source counts = 541.9 +/- 23.4
  Background counts = 4.4
  Rate = 0.03 +/- 0.001
[Tue Aug  7 20:59:04 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 20:59:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 20:59:04 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 20:59:04 2012] Source does appear to be extended
[Tue Aug  7 20:59:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 20:59:04 2012] Source is confused with source 36
[Wed Aug  8 12:37:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  8 12:37:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug  8 12:37:34 2012] Initial guess for spatial extent in simple fitting = 24.80"
[Wed Aug  8 12:37:34 2012] source mask rpix=5.7, npix_max = 153, mask sum = 156, frac = 1.014
[Wed Aug  8 12:37:34 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 24.80"
[Wed Aug  8 22:56:56 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src34.ximg exists
[Wed Aug  8 22:56:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src34.csv
[Wed Aug  8 22:56:56 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src34_1.ximg exists
[Wed Aug  8 22:56:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src34.csv
[Wed Aug  8 22:56:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 22:56:58 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Wed Aug  8 22:56:58 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Wed Aug  8 22:56:58 2012] Fit fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Wed Aug  8 22:57:59 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 11.427946 pixels away
[Wed Aug  8 22:57:59 2012] Warning, spatial fit 34 centroid is now closest to src. 35
[Wed Aug  8 22:57:59 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 22:57:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 22:57:59 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 22:57:59 2012] Source does appear to be extended
[Wed Aug  8 22:57:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 17:43:31 2012] XMMSAS src. selection expression = ellipse(39540.408000, 23669.548000, 1488.216043, 1488.216043, 0.000000, X, Y)
[Thu Aug  9 17:43:31 2012] Writing source region out to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src39_src.reg
[Thu Aug  9 17:43:31 2012] Extracting stamp from image fullrun_mos2_xmm0110011401_pi300-10000_cl_sm2.00.img.gz, (370, 187) - (541, 358)
[Thu Aug  9 17:43:31 2012] XMMSAS bgd. selection expression = annulus(39540.408000, 23669.548000, 2480.360071, 4960.720143, X, Y) && !ellipse(33078.344000, 25978.804000, 1541.584044, 465.105613, 10.424100, X, Y) && !ellipse(36903.558000, 24974.858000, 1887.912054, 1887.912054, 0.000000, X, Y) && !ellipse(35692.892600, 25483.876000, 1687.528049, 1687.528049, 0.000000, X, Y) && !ellipse(35827.694000, 25367.250000, 1716.504049, 1716.504049, 0.000000, X, Y) && !ellipse(38323.742000, 24315.720000, 3968.576114, 3968.576114, 0.000000, X, Y) && !ellipse(38937.727173, 24210.879700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35695.568000, 18978.130000, 1876.112054, 1876.112054, 0.000000, X, Y) && !ellipse(38068.766000, 24507.590000, 2402.584069, 2402.584069, 0.000000, X, Y) && !ellipse(37910.114014, 24058.677490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35142.163666, 18660.729462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39365.912000, 23829.946000, 1904.128055, 1904.128055, 0.000000, X, Y) && !ellipse(35448.586084, 20081.802000, 912.616026, 912.616026, 0.000000, X, Y) && !ellipse(36295.431396, 18575.108749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36605.836000, 26665.838000, 1716.504049, 1716.504049, 0.000000, X, Y) && !ellipse(36162.839233, 19736.105270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35186.274323, 26393.425293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32921.908000, 28839.479600, 2965.760085, 2965.760085, 0.000000, X, Y) && !ellipse(33871.976410, 28028.907410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35461.540000, 17072.386000, 1949.024056, 1949.024056, 0.000000, X, Y)
[Thu Aug  9 17:43:31 2012] Writing fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src39.gif
[Thu Aug  9 18:18:20 2012] Mean detx,y = (-10694.32, -8378.16) 
[Thu Aug  9 18:18:21 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 18:18:56 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 18:18:56 2012] Setting source spectrum file to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu Aug  9 18:18:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Thu Aug  9 21:40:05 2012] Updating aperture counts using extracted products
[Thu Aug  9 21:40:05 2012] Error reading totcts from fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu Aug  9 21:40:07 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 21:40:07 2012] Using photon index=1.80, rate=0.0301, arf fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src39.arf
[Thu Aug  9 21:40:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 21:40:07 2012] Updating source flux to 5.3e-13
[Thu Aug  9 21:50:23 2012] Flag c found in src. 39 procflags, skipping spectral fitting