[Tue Aug  7 03:25:37 2012] Detection parameters:
  Position = (439.9, 282.7) = 14 40 38.54 -62 15 41.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 118.1 +/- 14.7
  Background counts = 23.4
  Rate = 0.01 +/- 0.002

[Tue Aug  7 03:25:38 2012] Off-axis axis estimate = 10.32'
[Tue Aug  7 14:53:08 2012] Using EEF radius (= 11.59 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 14:53:08 2012] Initial guess for spatial extent in simple fitting = 11.59"
[Tue Aug  7 14:53:08 2012] source mask rpix=2.7, npix_max = 40, mask sum = 34, frac = 0.849
[Tue Aug  7 14:53:08 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 11.59"
[Tue Aug  7 20:57:48 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src23.ximg exists
[Tue Aug  7 20:57:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src23.csv
[Tue Aug  7 20:57:48 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src23_1.ximg exists
[Tue Aug  7 20:57:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src23.csv
[Tue Aug  7 20:57:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 20:57:51 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Tue Aug  7 20:57:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src23.csv
[Tue Aug  7 20:57:51 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Tue Aug  7 20:57:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src23.csv
[Tue Aug  7 20:57:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 20:59:04 2012] Warning, spatial fit 23 centroid is now closest to src. 37
[Tue Aug  7 20:59:04 2012] Source 35 is offset by -6.678431 and -5.837458 pixels which is larger than
2 X fitted extent = 1.320212 x 1.320212, not incorporating fit results
[Tue Aug  7 20:59:04 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 20:59:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 20:59:04 2012] Assessing source extent using major
[Tue Aug  7 20:59:04 2012] Source does appear to be extended
[Tue Aug  7 20:59:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 20:59:04 2012] Source is confused with source 77
[Tue Aug  7 20:59:04 2012] Source is confused with source 38
[Wed Aug  8 12:37:34 2012] Using EEF radius (= 11.59 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 12:37:34 2012] Initial guess for spatial extent in simple fitting = 11.59"
[Wed Aug  8 12:37:34 2012] source mask rpix=2.7, npix_max = 40, mask sum = 34, frac = 0.849
[Wed Aug  8 12:37:34 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 11.59"
[Wed Aug  8 22:56:56 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src20.ximg exists
[Wed Aug  8 22:56:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src20.csv
[Wed Aug  8 22:56:56 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src20_1.ximg exists
[Wed Aug  8 22:56:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src20.csv
[Wed Aug  8 22:56:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 22:56:58 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Wed Aug  8 22:56:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src20.csv
[Wed Aug  8 22:56:58 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Wed Aug  8 22:56:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src20.csv
[Wed Aug  8 22:56:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 22:57:58 2012] Warning, spatial fit 20 centroid is now closest to src. 36
[Wed Aug  8 22:57:59 2012] Spatial fit model total counts = 1794.900000, observed total counts = 1743.000000
[Wed Aug  8 22:57:59 2012] Offset between fit and detection position for source 35 = 2.923159 pixels
[Wed Aug  8 22:57:59 2012] Warning, changing simple spatial fit ID from 20 to 34
[Wed Aug  8 22:57:59 2012] 1790.193700 total counts/ 85.823700 bgd. counts: snr = 183.975615
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 2.923159 pixels
  Position = (441.1, 280.0) = 14 40 37.79 -62 15 54.4
  Extent = 49.6 (49.5-99.2)", rotation angle = 0
  Source counts = 1704.4 +/- 42.3
  Background counts = 85.8
  Rate = 0.09 +/- 0.002
[Wed Aug  8 22:57:59 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 22:57:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 22:57:59 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 22:57:59 2012] Source does appear to be extended
[Wed Aug  8 22:57:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 17:43:29 2012] Counts = 1704.370000, rescaling region sizes by 2.000000
[Thu Aug  9 17:43:29 2012] XMMSAS src. selection expression = ellipse(38323.742000, 24315.720000, 5952.864171, 5952.864171, 0.000000, X, Y)
[Thu Aug  9 17:43:29 2012] Writing source region out to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src35_src.reg
[Thu Aug  9 17:43:29 2012] Extracting stamp from image fullrun_mos2_xmm0110011401_pi300-10000_cl_sm2.00.img.gz, (99, 0) - (595, 595)
[Thu Aug  9 17:43:29 2012] XMMSAS bgd. selection expression = annulus(38323.742000, 24315.720000, 19842.880571, 39685.761142, X, Y) && !ellipse(26741.101379, 27772.508575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27909.732000, 27358.770000, 1173.784034, 909.360026, 73.168000, X, Y) && !ellipse(25635.703827, 28217.727783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28538.432000, 26987.014000, 738.140021, 738.140021, 0.000000, X, Y) && !ellipse(28495.162000, 27021.816000, 1204.320035, 1204.320035, 0.000000, X, Y) && !ellipse(24992.095762, 28550.473186, 1456.355824, 1175.165553, 83.937395, X, Y) && !ellipse(33078.344000, 25978.804000, 1541.584044, 465.105613, 10.424100, X, Y) && !ellipse(30274.600000, 26487.106200, 1320.000038, 751.662422, 16.101600, X, Y) && !ellipse(22838.970537, 28682.157889, 1437.864041, 868.663899, 1.788034, X, Y) && !ellipse(31422.631357, 26291.051119, 2071.664060, 805.533995, 6.504509, X, Y) && !ellipse(30627.530000, 26435.682000, 1376.880040, 508.940015, 12.328900, X, Y) && !ellipse(36903.558000, 24974.858000, 1887.912054, 1887.912054, 0.000000, X, Y) && !ellipse(35692.892600, 25483.876000, 1687.528049, 1687.528049, 0.000000, X, Y) && !ellipse(35827.694000, 25367.250000, 1716.504049, 1716.504049, 0.000000, X, Y) && !ellipse(23816.156848, 28550.870823, 1407.600041, 815.143765, 24.888456, X, Y) && !ellipse(21258.572000, 28907.031800, 1407.600041, 730.229621, 23.211300, X, Y) && !ellipse(36427.113600, 15358.748000, 2052.112059, 1419.112041, 249.017000, X, Y) && !ellipse(21646.838000, 28862.843800, 1356.040039, 1356.040039, 0.000000, X, Y) && !ellipse(37010.512600, 14763.928200, 1435.056041, 1435.056041, 0.000000, X, Y) && !ellipse(20427.004000, 29336.340000, 1599.512046, 1599.512046, 0.000000, X, Y) && !ellipse(38937.727173, 24210.879700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35695.568000, 18978.130000, 1876.112054, 1876.112054, 0.000000, X, Y) && !ellipse(19093.138000, 34024.016800, 1566.848045, 1566.848045, 0.000000, X, Y) && !ellipse(32350.236000, 26724.050000, 653.728019, 653.728019, 0.000000, X, Y) && !ellipse(36801.608000, 14785.582000, 2625.648076, 2625.648076, 0.000000, X, Y) && !ellipse(27914.054000, 40536.916400, 475.516014, 475.516014, 0.000000, X, Y) && !ellipse(35850.028992, 17529.325897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38068.766000, 24507.590000, 2402.584069, 2402.584069, 0.000000, X, Y) && !ellipse(36135.864136, 15184.439865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17750.065400, 28443.019400, 468.323213, 468.323213, 0.000000, X, Y) && !ellipse(19286.846000, 29442.199600, 1496.160043, 1496.160043, 0.000000, X, Y) && !ellipse(37243.258270, 13555.600632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39540.408000, 23669.548000, 1984.288057, 1984.288057, 0.000000, X, Y) && !ellipse(22264.249390, 29347.413544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31043.663971, 26914.931458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15628.986023, 29091.782013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37082.366150, 14064.256454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37910.114014, 24058.677490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35142.163666, 18660.729462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39365.912000, 23829.946000, 1904.128055, 1904.128055, 0.000000, X, Y) && !ellipse(20055.352000, 34118.298000, 1697.264049, 1697.264049, 0.000000, X, Y) && !ellipse(35448.586084, 20081.802000, 912.616026, 912.616026, 0.000000, X, Y) && !ellipse(18413.810410, 29183.194672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36295.431396, 18575.108749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20951.045349, 20042.567337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35091.738000, 15850.156000, 2015.792058, 2015.792058, 0.000000, X, Y) && !ellipse(31268.967102, 27457.104370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36605.836000, 26665.838000, 1716.504049, 1716.504049, 0.000000, X, Y) && !ellipse(18246.158400, 23118.211600, 655.620019, 289.585608, 46.752000, X, Y) && !ellipse(36333.963837, 14049.602020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33575.863647, 26646.717743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29006.675049, 27526.939606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31851.424774, 33091.599579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21779.764954, 34208.729706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36162.839233, 19736.105270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23852.402954, 33369.294403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30252.332489, 27529.830933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29494.637573, 27342.356659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35186.274323, 26393.425293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14452.837250, 28997.693085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21552.960000, 34398.798400, 1673.960048, 1673.960048, 0.000000, X, Y) && !ellipse(25532.107239, 33348.996704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15817.916000, 29317.428000, 1263.344036, 546.333616, 323.389000, X, Y) && !ellipse(32921.908000, 28839.479600, 2965.760085, 2965.760085, 0.000000, X, Y) && !ellipse(33871.976410, 28028.907410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32432.190000, 28654.684200, 1482.880043, 466.695213, 328.764000, X, Y) && !ellipse(33694.163788, 12183.578400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11948.409112, 19566.062000, 2047.288059, 2047.288059, 0.000000, X, Y) && !ellipse(35461.540000, 17072.386000, 1949.024056, 1949.024056, 0.000000, X, Y)
[Thu Aug  9 17:43:29 2012] Writing fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src35.gif
[Thu Aug  9 17:53:43 2012] Mean detx,y = (-8286.98, -6691.97) 
[Thu Aug  9 17:53:47 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 18:03:54 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 18:03:54 2012] Setting source spectrum file to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Thu Aug  9 18:03:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Thu Aug  9 21:40:04 2012] Updating aperture counts using extracted products
[Thu Aug  9 21:40:04 2012] Error reading totcts from fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Thu Aug  9 21:40:07 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 21:40:07 2012] Using photon index=1.80, rate=0.0947, arf fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src35.arf
[Thu Aug  9 21:40:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 21:40:07 2012] Updating source flux to 1.4e-12
[Thu Aug  9 21:50:23 2012] Flag b found in src. 35 procflags, skipping spectral fitting
[Thu Aug  9 21:50:23 2012] Flag c found in src. 35 procflags, skipping spectral fitting