[Tue Aug  7 03:25:36 2012] Detection parameters:
  Position = (418.2, 162.0) = 14 40 51.69 -62 24 30.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.8 +/- 17.1
  Background counts = 45.4
  Rate = 0.006 +/- 0.001

[Tue Aug  7 03:25:38 2012] Off-axis axis estimate = 13.16'
[Tue Aug  7 14:53:08 2012] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 14:53:08 2012] Initial guess for spatial extent in simple fitting = 13.01"
[Tue Aug  7 14:53:08 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.006
[Tue Aug  7 14:53:08 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 13.01"
[Tue Aug  7 20:57:49 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src57.ximg exists
[Tue Aug  7 20:57:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src57.csv
[Tue Aug  7 20:57:49 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src57_1.ximg exists
[Tue Aug  7 20:57:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src57.csv
[Tue Aug  7 20:57:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 20:57:53 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Tue Aug  7 20:57:53 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Tue Aug  7 20:57:53 2012] Fit fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src57 appears to have run properly
[Tue Aug  7 20:59:04 2012] Warning, spatial fit 57 centroid is now closest to src. 13
[Tue Aug  7 20:59:04 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 20:59:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 20:59:04 2012] Assessing source extent using major
[Tue Aug  7 20:59:04 2012] Source does appear to be extended
[Tue Aug  7 20:59:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 12:37:34 2012] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 12:37:34 2012] Initial guess for spatial extent in simple fitting = 13.01"
[Wed Aug  8 12:37:34 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.006
[Wed Aug  8 12:37:34 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 13.01"
[Wed Aug  8 22:56:57 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src51.ximg exists
[Wed Aug  8 22:56:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src51.csv
[Wed Aug  8 22:56:57 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src51_1.ximg exists
[Wed Aug  8 22:56:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src51.csv
[Wed Aug  8 22:56:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 22:56:59 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Wed Aug  8 22:56:59 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Wed Aug  8 22:56:59 2012] Fit fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Wed Aug  8 22:57:59 2012] Warning, spatial fit 51 centroid is now closest to src. 45
[Wed Aug  8 22:57:59 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 22:57:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 22:57:59 2012] Assessing source extent using major
[Wed Aug  8 22:57:59 2012] Source does appear to be extended
[Wed Aug  8 22:57:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 22:57:59 2012] Source is confused with source 1
[Wed Aug  8 22:57:59 2012] Source is confused with source 2
[Wed Aug  8 22:57:59 2012] Source is confused with source 13
[Thu Aug  9 17:43:32 2012] XMMSAS src. selection expression = ellipse(36333.963837, 14049.602020, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug  9 17:43:32 2012] Writing source region out to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src31_src.reg
[Thu Aug  9 17:43:32 2012] Extracting stamp from image fullrun_mos2_xmm0110011401_pi300-10000_cl_sm2.00.img.gz, (381, 125) - (456, 200)
[Thu Aug  9 17:43:32 2012] XMMSAS bgd. selection expression = annulus(36333.963837, 14049.602020, 1087.500000, 2175.000000, X, Y) && !ellipse(36427.113600, 15358.748000, 2052.112059, 1419.112041, 249.017000, X, Y) && !ellipse(37010.512600, 14763.928200, 1435.056041, 1435.056041, 0.000000, X, Y) && !ellipse(36801.608000, 14785.582000, 2625.648076, 2625.648076, 0.000000, X, Y) && !ellipse(36135.864136, 15184.439865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37243.258270, 13555.600632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37082.366150, 14064.256454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35091.738000, 15850.156000, 2015.792058, 2015.792058, 0.000000, X, Y) && !ellipse(33694.163788, 12183.578400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35461.540000, 17072.386000, 1949.024056, 1949.024056, 0.000000, X, Y)
[Thu Aug  9 17:43:32 2012] Writing fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src31.gif
[Thu Aug  9 18:27:04 2012] Mean detx,y = (-4590.18, -16328.50) 
[Thu Aug  9 18:27:07 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 18:27:23 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 18:27:24 2012] Setting source spectrum file to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu Aug  9 18:27:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Thu Aug  9 21:14:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug  9 21:14:05 2012] rmf not generated due to insufficient counts
[Thu Aug  9 21:40:05 2012] Updating aperture counts using extracted products
[Thu Aug  9 21:40:06 2012] Error reading totcts from fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu Aug  9 21:40:07 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 21:40:07 2012] Using photon index=1.80, rate=0.00572, arf fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src31.arf
[Thu Aug  9 21:40:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 21:40:07 2012] Updating source flux to 1.5e-13
[Thu Aug  9 21:50:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting