[Tue Aug  7 03:25:36 2012] Detection parameters:
  Position = (366.1, 307.8) = 14 41 24.53 -62 13 51.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 163.8 +/- 20.9
  Background counts = 50.5
  Rate = 0.01 +/- 0.001

[Tue Aug  7 03:25:38 2012] Off-axis axis estimate = 4.95'
[Tue Aug  7 14:53:08 2012] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 14:53:08 2012] Initial guess for spatial extent in simple fitting = 8.91"
[Tue Aug  7 14:53:08 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.963
[Tue Aug  7 14:53:08 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 8.91"
[Tue Aug  7 20:57:48 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src29.ximg exists
[Tue Aug  7 20:57:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src29.csv
[Tue Aug  7 20:57:48 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src29_1.ximg exists
[Tue Aug  7 20:57:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src29.csv
[Tue Aug  7 20:57:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 20:57:52 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Tue Aug  7 20:57:52 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Tue Aug  7 20:57:52 2012] Fit fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Tue Aug  7 20:59:04 2012] Spatial fit model total counts = 1802.690000, observed total counts = 1796.000000
[Tue Aug  7 20:59:04 2012] Offset between fit and detection position for source 26 = 4.992926 pixels
[Tue Aug  7 20:59:04 2012] 1712.052000 total counts/ 1378.110000 bgd. counts: snr = 8.995579
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 4.992926 pixels
  Position = (369.6, 304.1) = 14 41 22.40 -62 14 11.0
  Extent = 17.8 (17.8-35.6)", rotation angle = 0
  Source counts = 333.9 +/- 41.4
  Background counts = 1378.1
  Rate = 0.02 +/- 0.002
[Tue Aug  7 20:59:04 2012] Spatial fit model total counts = 1012.580000, observed total counts = 1012.000000
[Tue Aug  7 20:59:04 2012] Offset between fit and detection position for source 26 = 4.598871 pixels
[Tue Aug  7 20:59:04 2012] Warning, changing simple spatial fit ID from 29 to 61
[Tue Aug  7 20:59:04 2012] 965.529400 total counts/ 910.637000 bgd. counts: snr = 1.819029
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 4.598871 pixels
  Position = (372.4, 307.7) = 14 41 20.63 -62 13 55.3
  Extent = 8.1 (3.7-15.0)", rotation angle = 0
  Source counts = 54.9 +/- 31.1
  Background counts = 910.6
  Rate = 0.003 +/- 0.002
[Tue Aug  7 20:59:04 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 20:59:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 20:59:04 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 20:59:04 2012] Source does appear to be extended
[Tue Aug  7 20:59:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 20:59:04 2012] Source is confused with source 29
[Wed Aug  8 12:37:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  8 12:37:34 2012] Initial guess for spatial extent in simple fitting = 8.13"
[Wed Aug  8 12:37:34 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.115
[Wed Aug  8 12:37:34 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 8.13"
[Wed Aug  8 22:56:56 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src25.ximg exists
[Wed Aug  8 22:56:56 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src25_1.ximg exists
[Wed Aug  8 22:56:56 2012] Fit fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src25 appears to have run properly
[Wed Aug  8 22:56:58 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Wed Aug  8 22:56:58 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Wed Aug  8 22:56:58 2012] Fit fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Wed Aug  8 22:57:59 2012] Warning, spatial fit 25 centroid is now closest to src. 72
[Wed Aug  8 22:57:59 2012] Source 26 is offset by 5.731609 and -1.290322 pixels which is larger than
2 X fitted extent = 1.066051 x 1.066051, not incorporating fit results
[Wed Aug  8 22:57:59 2012] Spatial fit model total counts = 1016.640000, observed total counts = 1012.000000
[Wed Aug  8 22:57:59 2012] Offset between fit and detection position for source 26 = 0.004207 pixels
[Wed Aug  8 22:57:59 2012] Warning, changing simple spatial fit ID from 25 to 55
[Wed Aug  8 22:57:59 2012] 952.988500 total counts/ 896.375000 bgd. counts: snr = 1.890929
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.004207 pixels
  Position = (372.4, 307.7) = 14 41 20.63 -62 13 55.3
  Extent = 8.2 (3.7-14.9)", rotation angle = 0
  Source counts = 56.6 +/- 30.9
  Background counts = 896.4
  Rate = 0.003 +/- 0.002
[Wed Aug  8 22:57:59 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 22:57:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 22:57:59 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 22:57:59 2012] Source does appear to be extended
[Wed Aug  8 22:57:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 17:43:30 2012] XMMSAS src. selection expression = ellipse(32350.236000, 26724.050000, 490.296014, 490.296014, 0.000000, X, Y)
[Thu Aug  9 17:43:30 2012] Writing source region out to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src26_src.reg
[Thu Aug  9 17:43:30 2012] Extracting stamp from image fullrun_mos2_xmm0110011401_pi300-10000_cl_sm2.00.img.gz, (344, 280) - (401, 336)
[Thu Aug  9 17:43:30 2012] XMMSAS bgd. selection expression = annulus(32350.236000, 26724.050000, 817.160024, 1634.320047, X, Y) && !ellipse(33078.344000, 25978.804000, 1541.584044, 465.105613, 10.424100, X, Y) && !ellipse(30274.600000, 26487.106200, 1320.000038, 751.662422, 16.101600, X, Y) && !ellipse(31422.631357, 26291.051119, 2071.664060, 805.533995, 6.504509, X, Y) && !ellipse(30627.530000, 26435.682000, 1376.880040, 508.940015, 12.328900, X, Y) && !ellipse(31043.663971, 26914.931458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31268.967102, 27457.104370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33575.863647, 26646.717743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30252.332489, 27529.830933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32921.908000, 28839.479600, 2965.760085, 2965.760085, 0.000000, X, Y) && !ellipse(33871.976410, 28028.907410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32432.190000, 28654.684200, 1482.880043, 466.695213, 328.764000, X, Y)
[Thu Aug  9 17:43:30 2012] Writing fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src26.gif
[Thu Aug  9 18:06:05 2012] Mean detx,y = (-5076.33, -3136.87) 
[Thu Aug  9 18:06:06 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 18:06:14 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 18:06:15 2012] Setting source spectrum file to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Thu Aug  9 18:06:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Thu Aug  9 20:27:05 2012] Not generating rmf since there are only 56 counts
[Thu Aug  9 20:27:05 2012] rmf not generated due to insufficient counts
[Thu Aug  9 21:40:04 2012] Updating aperture counts using extracted products
[Thu Aug  9 21:40:05 2012] Error reading totcts from fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Thu Aug  9 21:40:07 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 21:40:07 2012] Using photon index=1.80, rate=0.00315, arf fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src26.arf
[Thu Aug  9 21:40:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 21:40:07 2012] Updating source flux to 4.1e-14
[Thu Aug  9 21:50:23 2012] Flag b found in src. 26 procflags, skipping spectral fitting
[Thu Aug  9 21:50:23 2012] Flag c found in src. 26 procflags, skipping spectral fitting
[Thu Aug  9 21:50:23 2012] Source 26 has fewer than 100.000000 counts, skipping spectral fitting