[Tue Aug  7 03:25:36 2012] Detection parameters:
  Position = (205.0, 327.9) = 14 43 4.76 -62 12 27.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.1 +/- 14.9
  Background counts = 41.0
  Rate = 0.009 +/- 0.001

[Tue Aug  7 03:25:38 2012] Off-axis axis estimate = 7.10'
[Tue Aug  7 14:53:08 2012] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 14:53:08 2012] Initial guess for spatial extent in simple fitting = 9.98"
[Tue Aug  7 14:53:08 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.153
[Tue Aug  7 14:53:08 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 9.98"
[Tue Aug  7 20:57:48 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src35.ximg exists
[Tue Aug  7 20:57:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src35.csv
[Tue Aug  7 20:57:48 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src35_1.ximg exists
[Tue Aug  7 20:57:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src35.csv
[Tue Aug  7 20:57:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 20:57:52 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Tue Aug  7 20:57:52 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Tue Aug  7 20:57:52 2012] Fit fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Tue Aug  7 20:59:04 2012] Source 23 is offset by 3.699810 and 7.806483 pixels which is larger than
2 X fitted extent = 1.147880 x 1.147880, not incorporating fit results
[Tue Aug  7 20:59:04 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 20:59:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 20:59:04 2012] Assessing source extent using major
[Tue Aug  7 20:59:04 2012] Source does appear to be extended
[Tue Aug  7 20:59:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 12:37:34 2012] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 12:37:34 2012] Initial guess for spatial extent in simple fitting = 9.98"
[Wed Aug  8 12:37:34 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.153
[Wed Aug  8 12:37:34 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 9.98"
[Wed Aug  8 22:56:56 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src31.ximg exists
[Wed Aug  8 22:56:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src31.csv
[Wed Aug  8 22:56:56 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src31_1.ximg exists
[Wed Aug  8 22:56:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src31.csv
[Wed Aug  8 22:56:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 22:56:58 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Wed Aug  8 22:56:58 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Wed Aug  8 22:56:58 2012] Fit fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Wed Aug  8 22:57:59 2012] Spatial fit model total counts = 619.948000, observed total counts = 618.000000
[Wed Aug  8 22:57:59 2012] Offset between fit and detection position for source 23 = 0.638934 pixels
[Wed Aug  8 22:57:59 2012] 640.932200 total counts/ 578.225000 bgd. counts: snr = 2.607768
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.638934 pixels
  Position = (204.6, 327.5) = 14 43 5.05 -62 12 29.1
  Extent = 5.9 (4.3-9.1)", rotation angle = 0
  Source counts = 62.7 +/- 25.3
  Background counts = 578.2
  Rate = 0.003 +/- 0.001
[Wed Aug  8 22:57:59 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 22:57:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 22:57:59 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 22:57:59 2012] Source does appear to be extended
[Wed Aug  8 22:57:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 17:43:30 2012] XMMSAS src. selection expression = ellipse(17750.065400, 28443.019400, 351.242410, 351.242410, 0.000000, X, Y)
[Thu Aug  9 17:43:30 2012] Writing source region out to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src23_src.reg
[Thu Aug  9 17:43:30 2012] Extracting stamp from image fullrun_mos2_xmm0110011401_pi300-10000_cl_sm2.00.img.gz, (184, 307) - (225, 348)
[Thu Aug  9 17:43:30 2012] XMMSAS bgd. selection expression = annulus(17750.065400, 28443.019400, 585.404017, 1170.808034, X, Y) && !ellipse(20427.004000, 29336.340000, 1599.512046, 1599.512046, 0.000000, X, Y) && !ellipse(19286.846000, 29442.199600, 1496.160043, 1496.160043, 0.000000, X, Y) && !ellipse(18413.810410, 29183.194672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15817.916000, 29317.428000, 1263.344036, 546.333616, 323.389000, X, Y)
[Thu Aug  9 17:43:30 2012] Writing fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src23.gif
[Thu Aug  9 18:16:36 2012] Mean detx,y = (7999.77, 3568.25) 
[Thu Aug  9 18:16:38 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 18:16:46 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 18:16:46 2012] Setting source spectrum file to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Aug  9 18:16:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Thu Aug  9 20:43:34 2012] Not generating rmf since there are only 62 counts
[Thu Aug  9 20:43:34 2012] rmf not generated due to insufficient counts
[Thu Aug  9 21:40:05 2012] Updating aperture counts using extracted products
[Thu Aug  9 21:40:05 2012] Error reading totcts from fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Aug  9 21:40:07 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 21:40:07 2012] Using photon index=1.80, rate=0.00349, arf fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src23.arf
[Thu Aug  9 21:40:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 21:40:07 2012] Updating source flux to 7.3e-14
[Thu Aug  9 21:50:23 2012] Flag b found in src. 23 procflags, skipping spectral fitting
[Thu Aug  9 21:50:23 2012] Source 23 has fewer than 100.000000 counts, skipping spectral fitting