[Tue Aug  7 03:25:36 2012] Detection parameters:
  Position = (425.9, 172.9) = 14 40 46.89 -62 23 41.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 252.3 +/- 23.7
  Background counts = 46.4
  Rate = 0.01 +/- 0.001

[Tue Aug  7 03:25:38 2012] Off-axis axis estimate = 12.97'
[Tue Aug  7 14:53:08 2012] Using EEF radius (= 12.91 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 14:53:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug  7 14:53:08 2012] Initial guess for spatial extent in simple fitting = 12.91"
[Tue Aug  7 14:53:08 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.018
[Tue Aug  7 14:53:08 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 12.91"
[Tue Aug  7 20:57:48 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src20.ximg exists
[Tue Aug  7 20:57:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src20.csv
[Tue Aug  7 20:57:48 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src20_1.ximg exists
[Tue Aug  7 20:57:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src20.csv
[Tue Aug  7 20:57:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 20:57:51 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Tue Aug  7 20:57:51 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Tue Aug  7 20:57:51 2012] Fit fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Tue Aug  7 20:59:04 2012] Spatial fit model total counts = 1739.930000, observed total counts = 1704.000000
[Tue Aug  7 20:59:04 2012] Offset between fit and detection position for source 2 = 3.539576 pixels
[Tue Aug  7 20:59:04 2012] 1407.328000 total counts/ 1090.810000 bgd. counts: snr = 9.583494
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 3.539576 pixels
  Position = (427.6, 169.8) = 14 40 45.81 -62 23 54.1
  Extent = 14.8 (10.5-20.8)", rotation angle = 0
  Source counts = 316.5 +/- 37.5
  Background counts = 1090.8
  Rate = 0.02 +/- 0.002
[Tue Aug  7 20:59:04 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 20:59:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 20:59:04 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 20:59:04 2012] Source does appear to be extended
[Tue Aug  7 20:59:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 20:59:04 2012] Source is confused with source 1
[Wed Aug  8 12:37:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  8 12:37:34 2012] Initial guess for spatial extent in simple fitting = 14.76"
[Wed Aug  8 12:37:34 2012] source mask rpix=3.4, npix_max = 60, mask sum = 62, frac = 1.023
[Wed Aug  8 12:37:34 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 14.76"
[Wed Aug  8 22:56:56 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src19.ximg exists
[Wed Aug  8 22:56:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src19.csv
[Wed Aug  8 22:56:56 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed Aug  8 22:56:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src19.csv
[Wed Aug  8 22:56:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 22:56:58 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed Aug  8 22:56:58 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed Aug  8 22:56:58 2012] Fit fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Wed Aug  8 22:57:58 2012] Spatial fit model total counts = 2002.820000, observed total counts = 1878.000000
[Wed Aug  8 22:57:58 2012] Offset between fit and detection position for source 2 = 1.710213 pixels
[Wed Aug  8 22:57:58 2012] 1968.573000 total counts/ 1569.810000 bgd. counts: snr = 10.064479
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.710213 pixels
  Position = (426.0, 170.3) = 14 40 46.85 -62 23 52.4
  Extent = 17.9 (13.8-24.1)", rotation angle = 0
  Source counts = 398.8 +/- 44.4
  Background counts = 1569.8
  Rate = 0.02 +/- 0.002
[Wed Aug  8 22:57:59 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 22:57:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 22:57:59 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 22:57:59 2012] Source does appear to be extended
[Wed Aug  8 22:57:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 17:43:29 2012] XMMSAS src. selection expression = ellipse(37010.512600, 14763.928200, 1076.292031, 1076.292031, 0.000000, X, Y)
[Thu Aug  9 17:43:29 2012] Writing source region out to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src2_src.reg
[Thu Aug  9 17:43:29 2012] Extracting stamp from image fullrun_mos2_xmm0110011401_pi300-10000_cl_sm2.00.img.gz, (364, 108) - (488, 232)
[Thu Aug  9 17:43:29 2012] XMMSAS bgd. selection expression = annulus(37010.512600, 14763.928200, 1793.820052, 3587.640103, X, Y) && !ellipse(36427.113600, 15358.748000, 2052.112059, 1419.112041, 249.017000, X, Y) && !ellipse(35695.568000, 18978.130000, 1876.112054, 1876.112054, 0.000000, X, Y) && !ellipse(36801.608000, 14785.582000, 2625.648076, 2625.648076, 0.000000, X, Y) && !ellipse(35850.028992, 17529.325897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36135.864136, 15184.439865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37243.258270, 13555.600632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37082.366150, 14064.256454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35142.163666, 18660.729462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36295.431396, 18575.108749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35091.738000, 15850.156000, 2015.792058, 2015.792058, 0.000000, X, Y) && !ellipse(36333.963837, 14049.602020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33694.163788, 12183.578400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35461.540000, 17072.386000, 1949.024056, 1949.024056, 0.000000, X, Y)
[Thu Aug  9 17:43:29 2012] Writing fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src2.gif
[Thu Aug  9 17:53:13 2012] Mean detx,y = (-5252.31, -15788.40) 
[Thu Aug  9 17:53:14 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 17:53:37 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 17:53:38 2012] Setting source spectrum file to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Aug  9 17:53:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Aug  9 21:40:04 2012] Updating aperture counts using extracted products
[Thu Aug  9 21:40:04 2012] Error reading totcts from fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Aug  9 21:40:07 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 21:40:07 2012] Using photon index=1.80, rate=0.0222, arf fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src2.arf
[Thu Aug  9 21:40:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 21:40:07 2012] Updating source flux to 5.5e-13
[Thu Aug  9 21:50:23 2012] Flag c found in src. 2 procflags, skipping spectral fitting