[Tue Aug 7 03:25:36 2012] Detection parameters: Position = (422.0, 177.0) = 14 40 49.37 -62 23 23.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 292.4 +/- 24.7 Background counts = 41.5 Rate = 0.02 +/- 0.001 [Tue Aug 7 03:25:38 2012] Off-axis axis estimate = 12.56' [Tue Aug 7 14:53:08 2012] Using EEF radius (= 12.71 ")to estimate initial spatial extent for simple fitting [Tue Aug 7 14:53:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Tue Aug 7 14:53:08 2012] Initial guess for spatial extent in simple fitting = 12.71" [Tue Aug 7 14:53:08 2012] source mask rpix=2.9, npix_max = 46, mask sum = 36, frac = 0.769 [Tue Aug 7 14:53:08 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 12.71" [Tue Aug 7 20:57:48 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src17.ximg exists [Tue Aug 7 20:57:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src17.csv [Tue Aug 7 20:57:48 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src17_1.ximg exists [Tue Aug 7 20:57:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src17.csv [Tue Aug 7 20:57:48 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src17_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Aug 7 20:57:51 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src17.ximg exists [Tue Aug 7 20:57:51 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists [Tue Aug 7 20:57:51 2012] Fit fullrun_mos2_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly [Tue Aug 7 20:59:04 2012] Warning, spatial fit 17 centroid is now closest to src. 47 [Tue Aug 7 20:59:04 2012] Spatial fit model total counts = 1307.130000, observed total counts = 1295.000000 [Tue Aug 7 20:59:04 2012] Offset between fit and detection position for source 1 = 2.915645 pixels [Tue Aug 7 20:59:04 2012] Warning, changing simple spatial fit ID from 17 to 26 [Tue Aug 7 20:59:04 2012] 1298.666000 total counts/ 898.561000 bgd. counts: snr = 13.347508 Spatial fit parameters: Offset between fit and detection position for source 1 = 2.915645 pixels Position = (420.2, 179.3) = 14 40 50.49 -62 23 13.1 Extent = 24.8 (24.8-49.5)" x 14.7 (10.8-19.4)", rotation angle = 90 Source counts = 400.1 +/- 36.0 Background counts = 898.6 Rate = 0.02 +/- 0.002 [Tue Aug 7 20:59:04 2012] Spatial fit model total counts = 1735.460000, observed total counts = 1736.000000 [Tue Aug 7 20:59:04 2012] Offset between fit and detection position for source 1 = 1.213233 pixels [Tue Aug 7 20:59:04 2012] Warning, changing simple spatial fit ID from 26 to 30 [Tue Aug 7 20:59:04 2012] 1447.015000 total counts/ 702.618000 bgd. counts: snr = 28.083096 Spatial fit parameters: Offset between fit and detection position for source 1 = 1.213233 pixels Position = (419.2, 178.6) = 14 40 51.09 -62 23 16.3 Extent = 23.2 (18.4-25.7)", rotation angle = 0 Source counts = 744.4 +/- 38.0 Background counts = 702.6 Rate = 0.04 +/- 0.002 [Tue Aug 7 20:59:04 2012] Vigneting correction estimate = 1.000000 [Tue Aug 7 20:59:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Aug 7 20:59:04 2012] Assessing source extent using major axis lower bound [Tue Aug 7 20:59:04 2012] Source does appear to be extended [Tue Aug 7 20:59:04 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Aug 7 20:59:04 2012] Source is confused with source 2 [Tue Aug 7 20:59:04 2012] Source is confused with source 13 [Tue Aug 7 20:59:04 2012] Source is confused with source 12 [Tue Aug 7 20:59:04 2012] Source is confused with source 45 [Tue Aug 7 20:59:04 2012] Source is confused with source 46 [Wed Aug 8 12:37:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Aug 8 12:37:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Aug 8 12:37:34 2012] Initial guess for spatial extent in simple fitting = 23.24" [Wed Aug 8 12:37:34 2012] source mask rpix=5.3, npix_max = 136, mask sum = 131, frac = 0.960 [Wed Aug 8 12:37:34 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 23.24" [Wed Aug 8 22:56:56 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src17.ximg exists [Wed Aug 8 22:56:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src17.csv [Wed Aug 8 22:56:56 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src17_1.ximg exists [Wed Aug 8 22:56:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src17.csv [Wed Aug 8 22:56:56 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src17_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 8 22:56:58 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists [Wed Aug 8 22:56:58 2012] fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists [Wed Aug 8 22:56:58 2012] Fit fullrun_mos2_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly [Wed Aug 8 22:57:58 2012] Warning, spatial fit 17 centroid is now closest to src. 13 [Wed Aug 8 22:57:59 2012] Spatial fit model total counts = 1730.890000, observed total counts = 1736.000000 [Wed Aug 8 22:57:59 2012] Offset between fit and detection position for source 1 = 1.475779 pixels [Wed Aug 8 22:57:59 2012] Warning, changing simple spatial fit ID from 17 to 26 [Wed Aug 8 22:57:59 2012] 1647.894000 total counts/ 1077.850000 bgd. counts: snr = 17.363178 Spatial fit parameters: Offset between fit and detection position for source 1 = 1.475779 pixels Position = (419.3, 177.1) = 14 40 51.07 -62 23 22.8 Extent = 25.7 (22.0-51.3)" x 17.7 (14.8-20.9)", rotation angle = 249 (221-268) degrees Source counts = 570.0 +/- 40.6 Background counts = 1077.8 Rate = 0.03 +/- 0.002 [Wed Aug 8 22:57:59 2012] Vigneting correction estimate = 1.000000 [Wed Aug 8 22:57:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 8 22:57:59 2012] Assessing source extent using major axis lower bound [Wed Aug 8 22:57:59 2012] Source does appear to be extended [Wed Aug 8 22:57:59 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.05 [Thu Aug 9 17:43:29 2012] XMMSAS src. selection expression = ellipse(36427.113600, 15358.748000, 1539.084044, 1064.334031, 249.017000, X, Y) [Thu Aug 9 17:43:29 2012] Writing source region out to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src1_src.reg [Thu Aug 9 17:43:29 2012] Extracting stamp from image fullrun_mos2_xmm0110011401_pi300-10000_cl_sm2.00.img.gz, (331, 89) - (508, 266) [Thu Aug 9 17:43:29 2012] XMMSAS bgd. selection expression = annulus(36427.113600, 15358.748000, 2565.140074, 5130.280148, X, Y) && !ellipse(37010.512600, 14763.928200, 1435.056041, 1435.056041, 0.000000, X, Y) && !ellipse(38323.742000, 24315.720000, 3968.576114, 3968.576114, 0.000000, X, Y) && !ellipse(35695.568000, 18978.130000, 1876.112054, 1876.112054, 0.000000, X, Y) && !ellipse(36801.608000, 14785.582000, 2625.648076, 2625.648076, 0.000000, X, Y) && !ellipse(35850.028992, 17529.325897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36135.864136, 15184.439865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37243.258270, 13555.600632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37082.366150, 14064.256454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35142.163666, 18660.729462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35448.586084, 20081.802000, 912.616026, 912.616026, 0.000000, X, Y) && !ellipse(36295.431396, 18575.108749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35091.738000, 15850.156000, 2015.792058, 2015.792058, 0.000000, X, Y) && !ellipse(36333.963837, 14049.602020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36162.839233, 19736.105270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33694.163788, 12183.578400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35461.540000, 17072.386000, 1949.024056, 1949.024056, 0.000000, X, Y) [Thu Aug 9 17:43:29 2012] Writing fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src1.gif [Thu Aug 9 17:51:41 2012] Mean detx,y = (-5074.69, -15200.27) [Thu Aug 9 17:51:43 2012] Setting backscal keywords in source and bgd. spectrum [Thu Aug 9 17:52:30 2012] Binned source spectrum to 10 counts/bin [Thu Aug 9 17:52:30 2012] Setting source spectrum file to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Thu Aug 9 17:52:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src1_bgd.pi.gz [Thu Aug 9 21:40:04 2012] Updating aperture counts using extracted products [Thu Aug 9 21:40:04 2012] Error reading totcts from fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Thu Aug 9 21:40:07 2012] Calculating source flux in energy range 0.30-8.00 [Thu Aug 9 21:40:07 2012] Using photon index=1.80, rate=0.0317, arf fullrun_mos2_xmm0110011401_pi300-10000_pass1_cl_src1.arf [Thu Aug 9 21:40:07 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu Aug 9 21:40:07 2012] Updating source flux to 6.9e-13 [Thu Aug 9 21:50:23 2012] Flag c found in src. 1 procflags, skipping spectral fitting