[Tue Aug 7 03:24:52 2012] Detection parameters: Position = (413.3, 204.0) = 14 40 54.90 -62 21 25.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 141.9 +/- 17.0 Background counts = 24.5 Rate = 0.008 +/- 0.0009 [Tue Aug 7 03:24:52 2012] Off-axis axis estimate = 10.78' [Tue Aug 7 08:24:43 2012] Using EEF radius (= 11.82 ")to estimate initial spatial extent for simple fitting [Tue Aug 7 08:24:43 2012] Initial guess for spatial extent in simple fitting = 11.82" [Tue Aug 7 08:24:43 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.870 [Tue Aug 7 08:24:43 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 11.82" [Tue Aug 7 14:53:01 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src41.ximg exists [Tue Aug 7 14:53:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src41.csv [Tue Aug 7 14:53:01 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src41_1.ximg exists [Tue Aug 7 14:53:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src41.csv [Tue Aug 7 14:53:01 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src41_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Aug 7 14:53:06 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src41.ximg exists [Tue Aug 7 14:53:06 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists [Tue Aug 7 14:53:06 2012] Fit fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly [Tue Aug 7 20:58:46 2012] Warning, spatial fit 41 centroid is now closest to src. 88 [Tue Aug 7 20:58:46 2012] Vigneting correction estimate = 1.000000 [Tue Aug 7 20:58:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Aug 7 20:58:46 2012] Assessing source extent using major [Tue Aug 7 20:58:46 2012] Source does appear to be extended [Tue Aug 7 20:58:46 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Aug 7 20:58:46 2012] Source is confused with source 12 [Tue Aug 7 20:58:46 2012] Source is confused with source 86 [Wed Aug 8 05:47:22 2012] Using EEF radius (= 11.82 ")to estimate initial spatial extent for simple fitting [Wed Aug 8 05:47:22 2012] Initial guess for spatial extent in simple fitting = 11.82" [Wed Aug 8 05:47:22 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.870 [Wed Aug 8 05:47:22 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 11.82" [Wed Aug 8 12:37:29 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src39.ximg exists [Wed Aug 8 12:37:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src39.csv [Wed Aug 8 12:37:29 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src39_1.ximg exists [Wed Aug 8 12:37:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src39.csv [Wed Aug 8 12:37:29 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src39_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 8 12:37:32 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src39.ximg exists [Wed Aug 8 12:37:32 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists [Wed Aug 8 12:37:32 2012] Fit fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly [Wed Aug 8 22:57:42 2012] Spatial fit model total counts = 968.784000, observed total counts = 962.000000 [Wed Aug 8 22:57:42 2012] Offset between fit and detection position for source 90 = 2.118767 pixels [Wed Aug 8 22:57:42 2012] 849.757000 total counts/ 573.785000 bgd. counts: snr = 11.521007 Spatial fit parameters: Offset between fit and detection position for source 90 = 2.118767 pixels Position = (412.7, 201.9) = 14 40 55.27 -62 21 34.8 Extent = 21.5 (17.2-23.6)", rotation angle = 0 Source counts = 276.0 +/- 29.2 Background counts = 573.8 Rate = 0.02 +/- 0.002 [Wed Aug 8 22:57:42 2012] Vigneting correction estimate = 1.000000 [Wed Aug 8 22:57:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 8 22:57:42 2012] Assessing source extent using major axis lower bound [Wed Aug 8 22:57:42 2012] Source does appear to be extended [Wed Aug 8 22:57:42 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Aug 9 09:54:08 2012] XMMSAS src. selection expression = ellipse(35852.400600, 17520.666000, 1288.794037, 1288.794037, 0.000000, X, Y) [Thu Aug 9 09:54:08 2012] Writing source region out to fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src90_src.reg [Thu Aug 9 09:54:08 2012] Extracting stamp from image fullrun_mos1_xmm0110011401_pi300-10000_cl_sm2.00.img.gz, (339, 128) - (487, 276) [Thu Aug 9 09:54:08 2012] XMMSAS bgd. selection expression = annulus(35852.400600, 17520.666000, 2147.990062, 4295.980124, X, Y) && !ellipse(36835.102000, 15396.734000, 848.472024, 848.472024, 0.000000, X, Y) && !ellipse(38715.608000, 23768.370000, 3577.152103, 3577.152103, 0.000000, X, Y) && !ellipse(36453.333954, 15780.966537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36604.934000, 15378.520000, 2461.536071, 2461.536071, 0.000000, X, Y) && !ellipse(36043.078000, 16345.402000, 2003.264058, 2003.264058, 0.000000, X, Y) && !ellipse(39750.272000, 23572.036000, 1930.464056, 1930.464056, 0.000000, X, Y) && !ellipse(35887.483490, 16832.145737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36316.214966, 14309.510803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36101.780200, 19386.018000, 1841.272053, 1841.272053, 0.000000, X, Y) && !ellipse(36267.115509, 14733.619873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36479.493958, 17335.020233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35578.979706, 18225.697601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35259.983246, 17532.880981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36892.388184, 16731.557297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37815.200000, 15422.390800, 737.452021, 737.452021, 0.000000, X, Y) && !ellipse(36158.561981, 19826.969666, 870.000000, 870.000000, 0.000000, X, Y) [Thu Aug 9 09:54:08 2012] Writing fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src90.gif [Thu Aug 9 11:52:29 2012] Mean detx,y = (-12831.86, 5092.37) [Thu Aug 9 11:52:31 2012] Setting backscal keywords in source and bgd. spectrum [Thu Aug 9 11:53:22 2012] Binned source spectrum to 10 counts/bin [Thu Aug 9 11:53:22 2012] Setting source spectrum file to fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src90_src_b10.pi.gz [Thu Aug 9 11:53:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src90_bgd.pi.gz [Thu Aug 9 21:40:00 2012] Updating aperture counts using extracted products [Thu Aug 9 21:40:00 2012] Error reading totcts from fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src90_src_b10.pi.gz [Thu Aug 9 21:40:03 2012] Calculating source flux in energy range 0.30-8.00 [Thu Aug 9 21:40:03 2012] Using photon index=1.80, rate=0.0153, arf fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src90.arf [Thu Aug 9 21:40:03 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu Aug 9 21:40:03 2012] Updating source flux to 2.9e-13 [Thu Aug 9 21:40:11 2012] Flag c found in src. 90 procflags, skipping spectral fitting