[Tue Aug 7 03:24:52 2012] Detection parameters: Position = (406.4, 296.0) = 14 40 59.46 -62 14 46.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 234.9 +/- 22.0 Background counts = 44.7 Rate = 0.02 +/- 0.002 [Tue Aug 7 03:24:52 2012] Off-axis axis estimate = 7.83' [Tue Aug 7 08:24:43 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting [Tue Aug 7 08:24:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Tue Aug 7 08:24:43 2012] Initial guess for spatial extent in simple fitting = 10.34" [Tue Aug 7 08:24:43 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.087 [Tue Aug 7 08:24:43 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 10.34" [Tue Aug 7 14:53:00 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src10.ximg exists [Tue Aug 7 14:53:00 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src10_1.ximg exists [Tue Aug 7 14:53:00 2012] Fit fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src10 appears to have run properly [Tue Aug 7 14:53:03 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists [Tue Aug 7 14:53:03 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists [Tue Aug 7 14:53:03 2012] Fit fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly [Tue Aug 7 20:58:45 2012] Warning, spatial fit 10 centroid is now closest to src. 68 [Tue Aug 7 20:58:46 2012] Spatial fit model total counts = 1222.770000, observed total counts = 1226.000000 [Tue Aug 7 20:58:46 2012] Offset between fit and detection position for source 71 = 4.779690 pixels [Tue Aug 7 20:58:46 2012] Warning, changing simple spatial fit ID from 10 to 26 [Tue Aug 7 20:58:46 2012] 1167.853000 total counts/ 816.231000 bgd. counts: snr = 12.307490 Spatial fit parameters: Offset between fit and detection position for source 71 = 4.779690 pixels Position = (410.9, 297.5) = 14 40 56.64 -62 14 39.0 Extent = 21.4 (21.3-42.8)", rotation angle = 0 Source counts = 351.6 +/- 34.2 Background counts = 816.2 Rate = 0.02 +/- 0.002 [Tue Aug 7 20:58:46 2012] Spatial fit model total counts = 684.389000, observed total counts = 678.000000 [Tue Aug 7 20:58:46 2012] Offset between fit and detection position for source 71 = 1.747927 pixels [Tue Aug 7 20:58:46 2012] Warning, changing simple spatial fit ID from 26 to 64 [Tue Aug 7 20:58:46 2012] 659.577800 total counts/ 598.678000 bgd. counts: snr = 2.488967 Spatial fit parameters: Offset between fit and detection position for source 71 = 1.747927 pixels Position = (412.2, 298.7) = 14 40 55.84 -62 14 33.8 Extent = 21.4 (20.2-42.9)" x 3.2 (2.7-5.5)", rotation angle = 169 (160-178) degrees Source counts = 60.9 +/- 25.7 Background counts = 598.7 Rate = 0.003 +/- 0.001 [Tue Aug 7 20:58:46 2012] Vigneting correction estimate = 1.000000 [Tue Aug 7 20:58:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Aug 7 20:58:46 2012] Assessing source extent using major axis lower bound [Tue Aug 7 20:58:46 2012] Source does appear to be extended [Tue Aug 7 20:58:46 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.71 [Tue Aug 7 20:58:46 2012] Source is asymmetric [Tue Aug 7 20:58:46 2012] Source is confused with source 69 [Tue Aug 7 20:58:46 2012] Source is confused with source 68 [Tue Aug 7 20:58:46 2012] Source is confused with source 66 [Tue Aug 7 20:58:46 2012] Source is confused with source 67 [Tue Aug 7 20:58:46 2012] Source is confused with source 62 [Wed Aug 8 05:47:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Aug 8 05:47:22 2012] Initial guess for spatial extent in simple fitting = 12.30" [Wed Aug 8 05:47:22 2012] source mask rpix=2.8, npix_max = 44, mask sum = 40, frac = 0.903 [Wed Aug 8 05:47:22 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 12.30" [Wed Aug 8 12:37:28 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src9.ximg exists [Wed Aug 8 12:37:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src9.csv [Wed Aug 8 12:37:28 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src9_1.ximg exists [Wed Aug 8 12:37:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src9.csv [Wed Aug 8 12:37:28 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src9_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 8 12:37:31 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists [Wed Aug 8 12:37:31 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists [Wed Aug 8 12:37:31 2012] Fit fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly [Wed Aug 8 22:57:42 2012] Warning, spatial fit 9 centroid is now closest to src. 68 [Wed Aug 8 22:57:42 2012] Vigneting correction estimate = 1.000000 [Wed Aug 8 22:57:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 8 22:57:42 2012] Assessing source extent using major axis lower bound [Wed Aug 8 22:57:42 2012] Source does appear to be extended [Wed Aug 8 22:57:42 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.71 [Wed Aug 8 22:57:42 2012] Source is asymmetric [Thu Aug 9 09:54:06 2012] XMMSAS src. selection expression = ellipse(35811.410000, 25940.758000, 1286.340037, 189.304805, 169.150000, X, Y) [Thu Aug 9 09:54:06 2012] Writing source region out to fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src71_src.reg [Thu Aug 9 09:54:06 2012] Extracting stamp from image fullrun_mos1_xmm0110011401_pi300-10000_cl_sm2.00.img.gz, (338, 225) - (486, 373) [Thu Aug 9 09:54:06 2012] XMMSAS bgd. selection expression = annulus(35811.410000, 25940.758000, 2143.900062, 4287.800123, X, Y) && !ellipse(30259.291800, 26487.709800, 2097.976060, 820.960024, 12.771900, X, Y) && !ellipse(32123.472000, 26327.623000, 3024.384087, 3024.384087, 0.000000, X, Y) && !ellipse(32790.252000, 26104.245600, 1512.592044, 1512.592044, 0.000000, X, Y) && !ellipse(35203.520000, 25630.793800, 3423.632099, 1638.088047, 23.965000, X, Y) && !ellipse(38715.608000, 23768.370000, 3577.152103, 3577.152103, 0.000000, X, Y) && !ellipse(37170.826000, 24826.408000, 1812.360052, 1812.360052, 0.000000, X, Y) && !ellipse(35269.644000, 25779.278000, 3322.344096, 3322.344096, 0.000000, X, Y) && !ellipse(37675.970000, 24509.166000, 1788.576051, 1788.576051, 0.000000, X, Y) && !ellipse(36949.612000, 24916.030000, 1747.048050, 1747.048050, 0.000000, X, Y) && !ellipse(39750.272000, 23572.036000, 1930.464056, 1930.464056, 0.000000, X, Y) && !ellipse(36136.110000, 25495.502000, 3621.920104, 3621.920104, 0.000000, X, Y) && !ellipse(38812.720000, 24427.742000, 1930.464056, 1930.464056, 0.000000, X, Y) && !ellipse(30769.102081, 27006.121094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33513.770477, 26543.830048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36435.822000, 26950.070000, 1715.120049, 1715.120049, 0.000000, X, Y) && !ellipse(33571.249207, 28497.445740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30962.242000, 28262.086000, 1287.408037, 1287.408037, 0.000000, X, Y) [Thu Aug 9 09:54:06 2012] Writing fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src71.gif [Thu Aug 9 10:45:59 2012] Mean detx,y = (-4776.61, 7791.56) [Thu Aug 9 10:46:01 2012] Setting backscal keywords in source and bgd. spectrum [Thu Aug 9 10:46:34 2012] Binned source spectrum to 10 counts/bin [Thu Aug 9 10:46:34 2012] Setting source spectrum file to fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src71_src_b10.pi.gz [Thu Aug 9 10:46:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src71_bgd.pi.gz [Thu Aug 9 15:04:48 2012] Not generating rmf since there are only 60 counts [Thu Aug 9 15:04:48 2012] rmf not generated due to insufficient counts [Thu Aug 9 21:39:59 2012] Updating aperture counts using extracted products [Thu Aug 9 21:39:59 2012] Error reading totcts from fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src71_src_b10.pi.gz [Thu Aug 9 21:40:02 2012] Calculating source flux in energy range 0.30-8.00 [Thu Aug 9 21:40:02 2012] Using photon index=1.80, rate=0.00338, arf fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src71.arf [Thu Aug 9 21:40:02 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu Aug 9 21:40:02 2012] Updating source flux to 5.8e-14 [Thu Aug 9 21:40:11 2012] Flag c found in src. 71 procflags, skipping spectral fitting [Thu Aug 9 21:40:11 2012] Source 71 has fewer than 100.000000 counts, skipping spectral fitting