[Tue Aug 7 03:24:52 2012] Detection parameters: Position = (354.2, 311.0) = 14 41 31.95 -62 13 39.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 125.0 +/- 17.9 Background counts = 49.8 Rate = 0.008 +/- 0.001 [Tue Aug 7 03:24:52 2012] Off-axis axis estimate = 4.15' [Tue Aug 7 08:24:43 2012] Using EEF radius (= 8.50 ")to estimate initial spatial extent for simple fitting [Tue Aug 7 08:24:43 2012] Initial guess for spatial extent in simple fitting = 8.50" [Tue Aug 7 08:24:43 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.830 [Tue Aug 7 08:24:43 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 8.50" [Tue Aug 7 14:53:01 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src43.ximg exists [Tue Aug 7 14:53:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src43.csv [Tue Aug 7 14:53:01 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src43_1.ximg exists [Tue Aug 7 14:53:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src43.csv [Tue Aug 7 14:53:01 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src43_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Aug 7 14:53:06 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src43.ximg exists [Tue Aug 7 14:53:06 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists [Tue Aug 7 14:53:06 2012] Fit fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly [Tue Aug 7 20:58:46 2012] Warning, spatial fit 43 centroid is now closest to src. 64 [Tue Aug 7 20:58:46 2012] Vigneting correction estimate = 1.000000 [Tue Aug 7 20:58:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Aug 7 20:58:46 2012] Assessing source extent using major [Tue Aug 7 20:58:46 2012] Source does appear to be extended [Tue Aug 7 20:58:46 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Aug 7 20:58:46 2012] Source is confused with source 9 [Wed Aug 8 05:47:22 2012] Using EEF radius (= 8.50 ")to estimate initial spatial extent for simple fitting [Wed Aug 8 05:47:22 2012] Initial guess for spatial extent in simple fitting = 8.50" [Wed Aug 8 05:47:22 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.830 [Wed Aug 8 05:47:22 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 8.50" [Wed Aug 8 12:37:29 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src40.ximg exists [Wed Aug 8 12:37:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src40.csv [Wed Aug 8 12:37:29 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src40_1.ximg exists [Wed Aug 8 12:37:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src40.csv [Wed Aug 8 12:37:29 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src40_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 8 12:37:32 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src40.ximg exists [Wed Aug 8 12:37:32 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists [Wed Aug 8 12:37:32 2012] Fit fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly [Wed Aug 8 22:57:42 2012] Source 60 is offset by -0.607103 and 6.867815 pixels which is larger than 2 X fitted extent = 3.720253 x 3.720253, not incorporating fit results [Wed Aug 8 22:57:42 2012] Warning, spatial fit 40 centroid is now closest to src. 64 [Wed Aug 8 22:57:42 2012] Warning: source 70 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 60 at 12.338198 pixels away [Wed Aug 8 22:57:42 2012] Vigneting correction estimate = 1.000000 [Wed Aug 8 22:57:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 8 22:57:42 2012] Assessing source extent using major [Wed Aug 8 22:57:42 2012] Source does appear to be extended [Wed Aug 8 22:57:42 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Aug 9 09:54:08 2012] XMMSAS src. selection expression = ellipse(30769.102081, 27006.121094, 652.500000, 652.500000, 0.000000, X, Y) [Thu Aug 9 09:54:08 2012] Writing source region out to fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src60_src.reg [Thu Aug 9 09:54:08 2012] Extracting stamp from image fullrun_mos1_xmm0110011401_pi300-10000_cl_sm2.00.img.gz, (317, 273) - (392, 348) [Thu Aug 9 09:54:09 2012] XMMSAS bgd. selection expression = annulus(30769.102081, 27006.121094, 1087.500000, 2175.000000, X, Y) && !ellipse(27513.436000, 27371.778000, 2010.016058, 1378.456040, 126.371000, X, Y) && !ellipse(28560.028000, 27028.504000, 625.013618, 625.013618, 0.000000, X, Y) && !ellipse(30259.291800, 26487.709800, 2097.976060, 820.960024, 12.771900, X, Y) && !ellipse(28329.765997, 27094.111209, 2097.976060, 774.067337, 25.716051, X, Y) && !ellipse(32123.472000, 26327.623000, 3024.384087, 3024.384087, 0.000000, X, Y) && !ellipse(32790.252000, 26104.245600, 1512.592044, 1512.592044, 0.000000, X, Y) && !ellipse(30339.872000, 26462.218000, 761.531222, 761.531222, 0.000000, X, Y) && !ellipse(35203.520000, 25630.793800, 3423.632099, 1638.088047, 23.965000, X, Y) && !ellipse(35269.644000, 25779.278000, 3322.344096, 3322.344096, 0.000000, X, Y) && !ellipse(36136.110000, 25495.502000, 3621.920104, 3621.920104, 0.000000, X, Y) && !ellipse(33513.770477, 26543.830048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29536.048065, 27567.234985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33571.249207, 28497.445740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30962.242000, 28262.086000, 1287.408037, 1287.408037, 0.000000, X, Y) && !ellipse(28340.838837, 28193.827209, 870.000000, 870.000000, 0.000000, X, Y) [Thu Aug 9 09:54:09 2012] Writing fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src60.gif [Thu Aug 9 11:53:28 2012] Mean detx,y = (-2169.28, 3480.39) [Thu Aug 9 11:53:30 2012] Setting backscal keywords in source and bgd. spectrum [Thu Aug 9 11:53:45 2012] Binned source spectrum to 10 counts/bin [Thu Aug 9 11:53:45 2012] Setting source spectrum file to fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src60_src_b10.pi.gz [Thu Aug 9 11:53:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src60_bgd.pi.gz [Thu Aug 9 17:00:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Thu Aug 9 17:00:18 2012] rmf not generated due to insufficient counts [Thu Aug 9 21:40:00 2012] Updating aperture counts using extracted products [Thu Aug 9 21:40:00 2012] Error reading totcts from fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src60_src_b10.pi.gz [Thu Aug 9 21:40:03 2012] Calculating source flux in energy range 0.30-8.00 [Thu Aug 9 21:40:03 2012] Using photon index=1.80, rate=0.00768, arf fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src60.arf [Thu Aug 9 21:40:03 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu Aug 9 21:40:03 2012] Updating source flux to 8.6e-14 [Thu Aug 9 21:40:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting