[Tue Aug  7 03:24:52 2012] Detection parameters:
  Position = (386.4, 328.1) = 14 41 11.94 -62 12 30.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.3 +/- 11.5
  Background counts = 41.5
  Rate = 0.004 +/- 0.0009

[Tue Aug  7 03:24:52 2012] Off-axis axis estimate = 6.73'
[Tue Aug  7 08:24:44 2012] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 08:24:44 2012] Initial guess for spatial extent in simple fitting = 9.79"
[Tue Aug  7 08:24:44 2012] source mask rpix=2.3, npix_max = 30, mask sum = 17, frac = 0.561
[Tue Aug  7 08:24:44 2012] Giving source the simple spatial ID 75 for pass 0, mean size = 9.79"
[Tue Aug  7 14:53:02 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src75.ximg exists
[Tue Aug  7 14:53:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src75.csv
[Tue Aug  7 14:53:02 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src75_1.ximg exists
[Tue Aug  7 14:53:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src75.csv
[Tue Aug  7 14:53:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 14:53:07 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src75.ximg exists
[Tue Aug  7 14:53:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src75.csv
[Tue Aug  7 14:53:07 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists
[Tue Aug  7 14:53:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src75.csv
[Tue Aug  7 14:53:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 20:58:46 2012] Spatial fit model total counts = 603.783000, observed total counts = 500.000000
[Tue Aug  7 20:58:46 2012] Poor agreement between spatial fit and data for source 52
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug  7 20:58:46 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 20:58:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 20:58:46 2012] Assessing source extent using major
[Tue Aug  7 20:58:46 2012] Source does appear to be extended
[Tue Aug  7 20:58:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 05:47:22 2012] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 05:47:22 2012] Initial guess for spatial extent in simple fitting = 9.79"
[Wed Aug  8 05:47:22 2012] source mask rpix=2.3, npix_max = 30, mask sum = 17, frac = 0.561
[Wed Aug  8 05:47:22 2012] Giving source the simple spatial ID 67 for pass 1, mean size = 9.79"
[Wed Aug  8 12:37:30 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src67.ximg exists
[Wed Aug  8 12:37:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src67.csv
[Wed Aug  8 12:37:30 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src67_1.ximg exists
[Wed Aug  8 12:37:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src67.csv
[Wed Aug  8 12:37:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 12:37:34 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Wed Aug  8 12:37:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src67.csv
[Wed Aug  8 12:37:34 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Wed Aug  8 12:37:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src67.csv
[Wed Aug  8 12:37:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 22:57:42 2012] Source 52 is offset by 7.620175 and 6.300595 pixels which is larger than
2 X fitted extent = 7.186299 x 7.186299, not incorporating fit results
[Wed Aug  8 22:57:42 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 22:57:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 22:57:42 2012] Assessing source extent using major
[Wed Aug  8 22:57:42 2012] Source does appear to be extended
[Wed Aug  8 22:57:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 09:54:09 2012] XMMSAS src. selection expression = ellipse(33571.249207, 28497.445740, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug  9 09:54:09 2012] Writing source region out to fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src52_src.reg
[Thu Aug  9 09:54:09 2012] Extracting stamp from image fullrun_mos1_xmm0110011401_pi300-10000_cl_sm2.00.img.gz, (349, 291) - (424, 366)
[Thu Aug  9 09:54:09 2012] XMMSAS bgd. selection expression = annulus(33571.249207, 28497.445740, 1087.500000, 2175.000000, X, Y) && !ellipse(30259.291800, 26487.709800, 2097.976060, 820.960024, 12.771900, X, Y) && !ellipse(32123.472000, 26327.623000, 3024.384087, 3024.384087, 0.000000, X, Y) && !ellipse(35811.410000, 25940.758000, 1715.120049, 252.406407, 169.150000, X, Y) && !ellipse(32790.252000, 26104.245600, 1512.592044, 1512.592044, 0.000000, X, Y) && !ellipse(35203.520000, 25630.793800, 3423.632099, 1638.088047, 23.965000, X, Y) && !ellipse(38715.608000, 23768.370000, 3577.152103, 3577.152103, 0.000000, X, Y) && !ellipse(37170.826000, 24826.408000, 1812.360052, 1812.360052, 0.000000, X, Y) && !ellipse(35269.644000, 25779.278000, 3322.344096, 3322.344096, 0.000000, X, Y) && !ellipse(36949.612000, 24916.030000, 1747.048050, 1747.048050, 0.000000, X, Y) && !ellipse(36136.110000, 25495.502000, 3621.920104, 3621.920104, 0.000000, X, Y) && !ellipse(30769.102081, 27006.121094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33513.770477, 26543.830048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36435.822000, 26950.070000, 1715.120049, 1715.120049, 0.000000, X, Y) && !ellipse(30962.242000, 28262.086000, 1287.408037, 1287.408037, 0.000000, X, Y)
[Thu Aug  9 09:54:09 2012] Writing fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src52.gif
[Thu Aug  9 12:04:42 2012] Mean detx,y = (-1648.03, 6758.87) 
[Thu Aug  9 12:04:44 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 12:05:16 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 12:05:16 2012] Setting source spectrum file to fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Thu Aug  9 12:05:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Thu Aug  9 17:29:00 2012] Not generating rmf since there are only 52 counts
[Thu Aug  9 17:29:00 2012] rmf not generated due to insufficient counts
[Thu Aug  9 21:40:01 2012] Updating aperture counts using extracted products
[Thu Aug  9 21:40:01 2012] Error reading totcts from fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Thu Aug  9 21:40:03 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 21:40:03 2012] Using photon index=1.80, rate=0.00432, arf fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src52.arf
[Thu Aug  9 21:40:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 21:40:03 2012] Updating source flux to 7.9e-14
[Thu Aug  9 21:40:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting