[Tue Aug  7 03:24:51 2012] Detection parameters:
  Position = (241.8, 395.5) = 14 42 41.78 -62 7 32.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.7 +/- 10.6
  Background counts = 18.2
  Rate = 0.006 +/- 0.001

[Tue Aug  7 03:24:52 2012] Off-axis axis estimate = 8.15'
[Tue Aug  7 08:24:44 2012] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 08:24:44 2012] Initial guess for spatial extent in simple fitting = 10.50"
[Tue Aug  7 08:24:44 2012] source mask rpix=2.4, npix_max = 33, mask sum = 23, frac = 0.677
[Tue Aug  7 08:24:44 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 10.50"
[Tue Aug  7 14:53:01 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src55.ximg exists
[Tue Aug  7 14:53:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src55.csv
[Tue Aug  7 14:53:01 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src55_1.ximg exists
[Tue Aug  7 14:53:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src55.csv
[Tue Aug  7 14:53:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 14:53:07 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Tue Aug  7 14:53:07 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Tue Aug  7 14:53:07 2012] Fit fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Tue Aug  7 20:58:46 2012] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 11.134579 pixels away
[Tue Aug  7 20:58:46 2012] Spatial fit model total counts = 346.884000, observed total counts = 355.000000
[Tue Aug  7 20:58:46 2012] Offset between fit and detection position for source 21 = 4.822433 pixels
[Tue Aug  7 20:58:46 2012] 245.256000 total counts/ 105.653000 bgd. counts: snr = 13.581691
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 4.822433 pixels
  Position = (246.5, 396.8) = 14 42 38.89 -62 7 28.1
  Extent = 21.0 (21.0-21.0)", rotation angle = 0
  Source counts = 139.6 +/- 15.7
  Background counts = 105.7
  Rate = 0.008 +/- 0.0009
[Tue Aug  7 20:58:46 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 20:58:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 20:58:46 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 20:58:46 2012] Source does appear to be extended
[Tue Aug  7 20:58:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 20:58:46 2012] Source is confused with source 23
[Wed Aug  8 05:47:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  8 05:47:22 2012] Initial guess for spatial extent in simple fitting = 21.00"
[Wed Aug  8 05:47:22 2012] source mask rpix=4.8, npix_max = 113, mask sum = 95, frac = 0.837
[Wed Aug  8 05:47:22 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 21.00"
[Wed Aug  8 12:37:29 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src52.ximg exists
[Wed Aug  8 12:37:29 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src52_1.ximg exists
[Wed Aug  8 12:37:29 2012] Fit fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src52 appears to have run properly
[Wed Aug  8 12:37:33 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Wed Aug  8 12:37:33 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Wed Aug  8 12:37:33 2012] Fit fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Wed Aug  8 22:57:42 2012] Warning, spatial fit 52 centroid is now closest to src. 31
[Wed Aug  8 22:57:42 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 22:57:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 22:57:42 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 22:57:42 2012] Source does appear to be extended
[Wed Aug  8 22:57:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 09:54:09 2012] XMMSAS src. selection expression = ellipse(21395.726000, 34473.224200, 1259.910036, 1259.910036, 0.000000, X, Y)
[Thu Aug  9 09:54:09 2012] Writing source region out to fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src21_src.reg
[Thu Aug  9 09:54:09 2012] Extracting stamp from image fullrun_mos1_xmm0110011401_pi300-10000_cl_sm2.00.img.gz, (174, 324) - (319, 469)
[Thu Aug  9 09:54:09 2012] XMMSAS bgd. selection expression = annulus(21395.726000, 34473.224200, 2099.850060, 4199.700121, X, Y) && !ellipse(25827.686000, 28072.102000, 2321.408067, 2321.408067, 0.000000, X, Y) && !ellipse(20626.896000, 29013.948600, 1449.384042, 1449.384042, 0.000000, X, Y) && !ellipse(19385.467499, 29494.287109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21959.412000, 29837.222000, 1034.000030, 1034.000030, 0.000000, X, Y) && !ellipse(19508.274000, 34130.747720, 1734.360050, 1734.360050, 0.000000, X, Y) && !ellipse(18393.210000, 34127.503040, 1734.360050, 1734.360050, 0.000000, X, Y) && !ellipse(21315.937973, 29484.341370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22105.856000, 34318.259000, 1631.088047, 1631.088047, 0.000000, X, Y) && !ellipse(22286.827759, 32687.644836, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug  9 09:54:09 2012] Writing fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src21.gif
[Thu Aug  9 11:59:56 2012] Mean detx,y = (8074.81, -2612.34) 
[Thu Aug  9 11:59:58 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 12:00:57 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 12:00:58 2012] Setting source spectrum file to fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Thu Aug  9 12:00:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Thu Aug  9 21:40:00 2012] Updating aperture counts using extracted products
[Thu Aug  9 21:40:01 2012] Error reading totcts from fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Thu Aug  9 21:40:03 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 21:40:03 2012] Using photon index=1.80, rate=0.00776, arf fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src21.arf
[Thu Aug  9 21:40:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 21:40:03 2012] Updating source flux to 1.2e-13
[Thu Aug  9 21:40:11 2012] Flag c found in src. 21 procflags, skipping spectral fitting