[Tue Aug  7 03:24:51 2012] Detection parameters:
  Position = (424.2, 168.1) = 14 40 47.92 -62 24 5.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 253.7 +/- 22.6
  Background counts = 32.3
  Rate = 0.01 +/- 0.001

[Tue Aug  7 03:24:52 2012] Off-axis axis estimate = 13.13'
[Tue Aug  7 08:24:43 2012] Using EEF radius (= 13.00 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 08:24:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug  7 08:24:43 2012] Initial guess for spatial extent in simple fitting = 13.00"
[Tue Aug  7 08:24:43 2012] source mask rpix=3.0, npix_max = 48, mask sum = 48, frac = 0.987
[Tue Aug  7 08:24:43 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 13.00"
[Tue Aug  7 14:53:01 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src25.ximg exists
[Tue Aug  7 14:53:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src25.csv
[Tue Aug  7 14:53:01 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src25_1.ximg exists
[Tue Aug  7 14:53:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src25.csv
[Tue Aug  7 14:53:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 14:53:03 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Tue Aug  7 14:53:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src25.csv
[Tue Aug  7 14:53:03 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Tue Aug  7 14:53:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src25.csv
[Tue Aug  7 14:53:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 20:58:46 2012] Warning, spatial fit 25 centroid is now closest to src. 13
[Tue Aug  7 20:58:46 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 20:58:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 20:58:46 2012] Assessing source extent using major
[Tue Aug  7 20:58:46 2012] Source does appear to be extended
[Tue Aug  7 20:58:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 20:58:46 2012] Source is confused with source 18
[Tue Aug  7 20:58:46 2012] Source is confused with source 94
[Wed Aug  8 05:47:22 2012] Using EEF radius (= 13.00 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 05:47:22 2012] Initial guess for spatial extent in simple fitting = 13.00"
[Wed Aug  8 05:47:22 2012] source mask rpix=3.0, npix_max = 48, mask sum = 48, frac = 0.987
[Wed Aug  8 05:47:22 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 13.00"
[Wed Aug  8 12:37:28 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src23.ximg exists
[Wed Aug  8 12:37:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src23.csv
[Wed Aug  8 12:37:28 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src23_1.ximg exists
[Wed Aug  8 12:37:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src23.csv
[Wed Aug  8 12:37:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 12:37:32 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Wed Aug  8 12:37:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src23.csv
[Wed Aug  8 12:37:32 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Wed Aug  8 12:37:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src23.csv
[Wed Aug  8 12:37:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 22:57:42 2012] Spatial fit model total counts = 1754.130000, observed total counts = 1742.000000
[Wed Aug  8 22:57:42 2012] Offset between fit and detection position for source 14 = 6.517889 pixels
[Wed Aug  8 22:57:42 2012] Warning, changing simple spatial fit ID from 23 to 10
[Wed Aug  8 22:57:42 2012] 1723.309000 total counts/ 1259.880000 bgd. counts: snr = 13.056255
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 6.517889 pixels
  Position = (423.9, 174.6) = 14 40 48.15 -62 23 33.6
  Extent = 16.7 (13.5-20.9)", rotation angle = 0
  Source counts = 463.4 +/- 41.5
  Background counts = 1259.9
  Rate = 0.03 +/- 0.002
[Wed Aug  8 22:57:42 2012] Spatial fit model total counts = 1544.600000, observed total counts = 1520.000000
[Wed Aug  8 22:57:42 2012] Offset between fit and detection position for source 14 = 2.514220 pixels
[Wed Aug  8 22:57:42 2012] Warning, changing simple spatial fit ID from 10 to 22
[Wed Aug  8 22:57:42 2012] 1517.892000 total counts/ 510.402000 bgd. counts: snr = 44.594835
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 2.514220 pixels
  Position = (421.9, 176.1) = 14 40 49.38 -62 23 26.8
  Extent = 25.0 (24.9-50.1)", rotation angle = 0
  Source counts = 1007.5 +/- 39.0
  Background counts = 510.4
  Rate = 0.06 +/- 0.002
[Wed Aug  8 22:57:42 2012] Spatial fit model total counts = 3779.850000, observed total counts = 3726.000000
[Wed Aug  8 22:57:42 2012] Offset between fit and detection position for source 14 = 1.342112 pixels
[Wed Aug  8 22:57:42 2012] Warning, changing simple spatial fit ID from 22 to 30
[Wed Aug  8 22:57:42 2012] 3607.780000 total counts/ 2320.040000 bgd. counts: snr = 26.735016
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 1.342112 pixels
  Position = (421.3, 177.3) = 14 40 49.79 -62 23 21.7
  Extent = 30.8 (24.2-39.0)", rotation angle = 0
  Source counts = 1287.7 +/- 60.1
  Background counts = 2320.0
  Rate = 0.07 +/- 0.003
[Wed Aug  8 22:57:42 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 22:57:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 22:57:42 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 22:57:42 2012] Source does appear to be extended
[Wed Aug  8 22:57:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 09:54:07 2012] Counts = 1287.740000, rescaling region sizes by 2.000000
[Thu Aug  9 09:54:07 2012] XMMSAS src. selection expression = ellipse(36604.934000, 15378.520000, 3692.304106, 3692.304106, 0.000000, X, Y)
[Thu Aug  9 09:54:07 2012] Writing source region out to fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src14_src.reg
[Thu Aug  9 09:54:07 2012] Extracting stamp from image fullrun_mos1_xmm0110011401_pi300-10000_cl_sm2.00.img.gz, (209, 0) - (595, 390)
[Thu Aug  9 09:54:07 2012] XMMSAS bgd. selection expression = annulus(36604.934000, 15378.520000, 12307.680354, 24615.360708, X, Y) && !ellipse(26731.950680, 27715.099400, 1160.704033, 1160.704033, 0.000000, X, Y) && !ellipse(27513.436000, 27371.778000, 2010.016058, 1378.456040, 126.371000, X, Y) && !ellipse(25827.686000, 28072.102000, 2321.408067, 2321.408067, 0.000000, X, Y) && !ellipse(25553.832000, 28248.676000, 1201.520035, 880.824025, 22.536000, X, Y) && !ellipse(28560.028000, 27028.504000, 625.013618, 625.013618, 0.000000, X, Y) && !ellipse(30259.291800, 26487.709800, 2097.976060, 820.960024, 12.771900, X, Y) && !ellipse(28329.765997, 27094.111209, 2097.976060, 774.067337, 25.716051, X, Y) && !ellipse(32123.472000, 26327.623000, 3024.384087, 3024.384087, 0.000000, X, Y) && !ellipse(35811.410000, 25940.758000, 1715.120049, 252.406407, 169.150000, X, Y) && !ellipse(36835.102000, 15396.734000, 848.472024, 848.472024, 0.000000, X, Y) && !ellipse(32790.252000, 26104.245600, 1512.592044, 1512.592044, 0.000000, X, Y) && !ellipse(24506.374000, 28321.246600, 1234.136036, 1234.136036, 0.000000, X, Y) && !ellipse(23834.912000, 28778.655800, 1280.016037, 1280.016037, 0.000000, X, Y) && !ellipse(30339.872000, 26462.218000, 761.531222, 761.531222, 0.000000, X, Y) && !ellipse(35203.520000, 25630.793800, 3423.632099, 1638.088047, 23.965000, X, Y) && !ellipse(20939.876968, 28932.060760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20626.896000, 29013.948600, 1449.384042, 1449.384042, 0.000000, X, Y) && !ellipse(38715.608000, 23768.370000, 3577.152103, 3577.152103, 0.000000, X, Y) && !ellipse(37170.826000, 24826.408000, 1812.360052, 1812.360052, 0.000000, X, Y) && !ellipse(36453.333954, 15780.966537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35269.644000, 25779.278000, 3322.344096, 3322.344096, 0.000000, X, Y) && !ellipse(22413.606000, 28796.950400, 1350.600039, 1350.600039, 0.000000, X, Y) && !ellipse(19385.467499, 29494.287109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37675.970000, 24509.166000, 1788.576051, 1788.576051, 0.000000, X, Y) && !ellipse(36949.612000, 24916.030000, 1747.048050, 1747.048050, 0.000000, X, Y) && !ellipse(24345.903870, 29090.751862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36043.078000, 16345.402000, 2003.264058, 2003.264058, 0.000000, X, Y) && !ellipse(15724.284000, 29108.474000, 951.096027, 951.096027, 0.000000, X, Y) && !ellipse(39750.272000, 23572.036000, 1930.464056, 1930.464056, 0.000000, X, Y) && !ellipse(35887.483490, 16832.145737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36136.110000, 25495.502000, 3621.920104, 3621.920104, 0.000000, X, Y) && !ellipse(27893.615082, 40563.956512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38812.720000, 24427.742000, 1930.464056, 1930.464056, 0.000000, X, Y) && !ellipse(21959.412000, 29837.222000, 1034.000030, 1034.000030, 0.000000, X, Y) && !ellipse(35852.400600, 17520.666000, 1718.392049, 1718.392049, 0.000000, X, Y) && !ellipse(30769.102081, 27006.121094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17809.180800, 28362.108400, 528.655215, 528.655215, 0.000000, X, Y) && !ellipse(19508.274000, 34130.747720, 1734.360050, 1734.360050, 0.000000, X, Y) && !ellipse(36316.214966, 14309.510803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18393.210000, 34127.503040, 1734.360050, 1734.360050, 0.000000, X, Y) && !ellipse(33513.770477, 26543.830048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29536.048065, 27567.234985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21315.937973, 29484.341370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36101.780200, 19386.018000, 1841.272053, 1841.272053, 0.000000, X, Y) && !ellipse(36267.115509, 14733.619873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18241.046326, 29360.593109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21395.726000, 34473.224200, 1679.880048, 1679.880048, 0.000000, X, Y) && !ellipse(36479.493958, 17335.020233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23182.464722, 29330.516937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14453.026400, 28942.653800, 635.884018, 635.884018, 0.000000, X, Y) && !ellipse(35578.979706, 18225.697601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36435.822000, 26950.070000, 1715.120049, 1715.120049, 0.000000, X, Y) && !ellipse(35259.983246, 17532.880981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22105.856000, 34318.259000, 1631.088047, 1631.088047, 0.000000, X, Y) && !ellipse(36892.388184, 16731.557297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33571.249207, 28497.445740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22286.827759, 32687.644836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14633.375200, 28958.082000, 1129.536033, 1129.536033, 0.000000, X, Y) && !ellipse(30962.242000, 28262.086000, 1287.408037, 1287.408037, 0.000000, X, Y) && !ellipse(28340.838837, 28193.827209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11840.690659, 19533.330063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16847.162000, 28286.994000, 1683.464048, 1683.464048, 0.000000, X, Y) && !ellipse(37815.200000, 15422.390800, 737.452021, 737.452021, 0.000000, X, Y) && !ellipse(15172.064774, 21705.239609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36158.561981, 19826.969666, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug  9 09:54:07 2012] Writing fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src14.gif
[Thu Aug  9 11:13:32 2012] Mean detx,y = (-14154.01, 4581.93) 
[Thu Aug  9 11:13:36 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 11:23:55 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 11:23:56 2012] Setting source spectrum file to fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Thu Aug  9 11:23:56 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Thu Aug  9 21:39:59 2012] Updating aperture counts using extracted products
[Thu Aug  9 21:39:59 2012] Error reading totcts from fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Thu Aug  9 21:40:02 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 21:40:02 2012] Using photon index=1.80, rate=0.0716, arf fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src14.arf
[Thu Aug  9 21:40:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 21:40:02 2012] Updating source flux to 1.5e-12
[Thu Aug  9 21:40:11 2012] Flag c found in src. 14 procflags, skipping spectral fitting