[Tue Aug  7 03:24:51 2012] Detection parameters:
  Position = (458.1, 270.0) = 14 40 27.15 -62 16 38.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 182.8 +/- 18.7
  Background counts = 21.6
  Rate = 0.01 +/- 0.001

[Tue Aug  7 03:24:52 2012] Off-axis axis estimate = 11.76'
[Tue Aug  7 08:24:43 2012] Using EEF radius (= 12.31 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 08:24:43 2012] Initial guess for spatial extent in simple fitting = 12.31"
[Tue Aug  7 08:24:43 2012] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.812
[Tue Aug  7 08:24:43 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 12.31"
[Tue Aug  7 14:53:01 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src35.ximg exists
[Tue Aug  7 14:53:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src35.csv
[Tue Aug  7 14:53:01 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src35_1.ximg exists
[Tue Aug  7 14:53:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src35.csv
[Tue Aug  7 14:53:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 14:53:04 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Tue Aug  7 14:53:04 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Tue Aug  7 14:53:04 2012] Fit fullrun_mos1_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Tue Aug  7 20:58:46 2012] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 15.956716 pixels away
[Tue Aug  7 20:58:46 2012] Spatial fit model total counts = 715.757000, observed total counts = 720.000000
[Tue Aug  7 20:58:46 2012] Offset between fit and detection position for source 10 = 1.612978 pixels
[Tue Aug  7 20:58:46 2012] Warning, changing simple spatial fit ID from 35 to 39
[Tue Aug  7 20:58:46 2012] 700.757500 total counts/ 32.638500 bgd. counts: snr = 116.946903
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.612978 pixels
  Position = (457.5, 271.5) = 14 40 27.54 -62 16 31.2
  Extent = 24.1 (24.1-48.3)", rotation angle = 0
  Source counts = 668.1 +/- 26.5
  Background counts = 32.6
  Rate = 0.04 +/- 0.001
[Tue Aug  7 20:58:46 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 20:58:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 20:58:46 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 20:58:46 2012] Source does appear to be extended
[Tue Aug  7 20:58:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 20:58:46 2012] Source is confused with source 75
[Wed Aug  8 05:47:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  8 05:47:22 2012] Initial guess for spatial extent in simple fitting = 24.13"
[Wed Aug  8 05:47:22 2012] source mask rpix=5.5, npix_max = 146, mask sum = 169, frac = 1.155
[Wed Aug  8 05:47:22 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 24.13"
[Wed Aug  8 12:37:29 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src33.ximg exists
[Wed Aug  8 12:37:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src33.csv
[Wed Aug  8 12:37:29 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src33_1.ximg exists
[Wed Aug  8 12:37:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src33.csv
[Wed Aug  8 12:37:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 12:37:32 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Wed Aug  8 12:37:32 2012] fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Wed Aug  8 12:37:32 2012] Fit fullrun_mos1_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Wed Aug  8 22:57:42 2012] Warning, spatial fit 33 centroid is now closest to src. 81
[Wed Aug  8 22:57:42 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 22:57:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 22:57:42 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 22:57:42 2012] Source does appear to be extended
[Wed Aug  8 22:57:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 09:54:08 2012] XMMSAS src. selection expression = ellipse(39750.272000, 23572.036000, 1447.848042, 1447.848042, 0.000000, X, Y)
[Thu Aug  9 09:54:08 2012] Writing source region out to fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src10_src.reg
[Thu Aug  9 09:54:08 2012] Extracting stamp from image fullrun_mos1_xmm0110011401_pi300-10000_cl_sm2.00.img.gz, (374, 188) - (541, 355)
[Thu Aug  9 09:54:08 2012] XMMSAS bgd. selection expression = annulus(39750.272000, 23572.036000, 2413.080069, 4826.160139, X, Y) && !ellipse(32123.472000, 26327.623000, 3024.384087, 3024.384087, 0.000000, X, Y) && !ellipse(35811.410000, 25940.758000, 1715.120049, 252.406407, 169.150000, X, Y) && !ellipse(35203.520000, 25630.793800, 3423.632099, 1638.088047, 23.965000, X, Y) && !ellipse(38715.608000, 23768.370000, 3577.152103, 3577.152103, 0.000000, X, Y) && !ellipse(37170.826000, 24826.408000, 1812.360052, 1812.360052, 0.000000, X, Y) && !ellipse(35269.644000, 25779.278000, 3322.344096, 3322.344096, 0.000000, X, Y) && !ellipse(37675.970000, 24509.166000, 1788.576051, 1788.576051, 0.000000, X, Y) && !ellipse(36949.612000, 24916.030000, 1747.048050, 1747.048050, 0.000000, X, Y) && !ellipse(36136.110000, 25495.502000, 3621.920104, 3621.920104, 0.000000, X, Y) && !ellipse(38812.720000, 24427.742000, 1930.464056, 1930.464056, 0.000000, X, Y) && !ellipse(35852.400600, 17520.666000, 1718.392049, 1718.392049, 0.000000, X, Y) && !ellipse(36101.780200, 19386.018000, 1841.272053, 1841.272053, 0.000000, X, Y) && !ellipse(35578.979706, 18225.697601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36435.822000, 26950.070000, 1715.120049, 1715.120049, 0.000000, X, Y) && !ellipse(36158.561981, 19826.969666, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug  9 09:54:08 2012] Writing fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src10.gif
[Thu Aug  9 11:39:44 2012] Mean detx,y = (-8302.18, 10645.09) 
[Thu Aug  9 11:39:47 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 11:40:50 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 11:40:51 2012] Setting source spectrum file to fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Aug  9 11:40:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Aug  9 21:39:59 2012] Updating aperture counts using extracted products
[Thu Aug  9 21:40:00 2012] Error reading totcts from fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Aug  9 21:40:02 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 21:40:02 2012] Using photon index=1.80, rate=0.0371, arf fullrun_mos1_xmm0110011401_pi300-10000_pass1_cl_src10.arf
[Thu Aug  9 21:40:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 21:40:02 2012] Updating source flux to 6.5e-13
[Thu Aug  9 21:40:11 2012] Flag c found in src. 10 procflags, skipping spectral fitting