[Sun May 20 17:22:48 2012] Detection parameters: Position = (243.1, 378.9) = 23 23 35.42 58 53 48.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 104.1 +/- 20.3 Background counts = 162.2 Rate = 0.005 +/- 0.001 [Sun May 20 17:22:50 2012] Off-axis axis estimate = 7.08' [Sun May 20 17:41:00 2012] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting [Sun May 20 17:41:00 2012] Initial guess for spatial extent in simple fitting = 9.97" [Sun May 20 17:41:00 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.155 [Sun May 20 17:41:00 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 9.97" [Tue May 22 06:13:41 2012] fullrun_pn_xmm0110011001_pi300-10000_cl_pass0_src56.ximg exists [Tue May 22 06:13:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011001_pi300-10000_cl_pass0_src56.csv [Tue May 22 06:13:41 2012] fullrun_pn_xmm0110011001_pi300-10000_cl_pass0_src56_1.ximg exists [Tue May 22 06:13:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011001_pi300-10000_cl_pass0_src56.csv [Tue May 22 06:13:41 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110011001_pi300-10000_cl_pass0_src56_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110011001_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 22 06:13:43 2012] fullrun_pn_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src56.ximg exists [Tue May 22 06:13:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src56.csv [Tue May 22 06:13:43 2012] fullrun_pn_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists [Tue May 22 06:13:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src56.csv [Tue May 22 06:13:43 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src56_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 23 02:26:24 2012] Source 56 is offset by 2.422717 and 5.361379 pixels which is larger than 2 X fitted extent = 1.126984 x 1.126984, not incorporating fit results [Wed May 23 02:26:24 2012] Warning, spatial fit 56 centroid is now closest to src. 55 [Wed May 23 02:26:24 2012] Vigneting correction estimate = 1.000000 [Wed May 23 02:26:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 23 02:26:24 2012] Assessing source extent using major [Wed May 23 02:26:24 2012] Source does appear to be extended [Wed May 23 02:26:24 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 23 02:26:24 2012] Deleting source due to low Poisson probability 0.8