[Sun May 20 17:22:45 2012] Detection parameters:
  Position = (274.9, 292.9) = 23 23 17.54 58 47 34.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36375.6 +/- 230.2
  Background counts = 206.0
  Rate = 2 +/- 0.01

[Sun May 20 17:22:50 2012] Off-axis axis estimate = 1.75'
[Sun May 20 17:41:00 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sun May 20 17:41:00 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sun May 20 17:41:00 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.842
[Sun May 20 17:41:00 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.30"
[Tue May 22 06:13:40 2012] fullrun_pn_xmm0110011001_pi300-10000_cl_pass0_src12.ximg exists
[Tue May 22 06:13:40 2012] fullrun_pn_xmm0110011001_pi300-10000_cl_pass0_src12_1.ximg exists
[Tue May 22 06:13:40 2012] Fit fullrun_pn_xmm0110011001_pi300-10000_cl_pass0_src12 appears to have run properly
[Tue May 22 06:13:42 2012] fullrun_pn_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Tue May 22 06:13:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src12.csv
[Tue May 22 06:13:42 2012] fullrun_pn_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Tue May 22 06:13:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src12.csv
[Tue May 22 06:13:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 02:26:24 2012] Spatial fit model total counts = 107617.000000, observed total counts = 103788.000000
[Wed May 23 02:26:24 2012] Offset between fit and detection position for source 12 = 3.443915 pixels
[Wed May 23 02:26:24 2012] 100064.000000 total counts/ 25600.000000 bgd. counts: snr = 465.400000
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 3.443915 pixels
  Position = (277.0, 295.6) = 23 23 16.36 58 47 46.1
  Extent = 15.7 (15.7-31.4)" x 15.7 (15.7-31.4)", rotation angle = -0
  Source counts = 74464.0 +/- 316.3
  Background counts = 25600.0
  Rate = 4 +/- 0.02
[Wed May 23 02:26:24 2012] Vigneting correction estimate = 1.000000
[Wed May 23 02:26:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 02:26:24 2012] Assessing source extent using major axis lower bound
[Wed May 23 02:26:24 2012] Source does appear to be extended
[Wed May 23 02:26:24 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.50
[Wed May 23 02:26:24 2012] Source is confused with source 10
[Wed May 23 02:27:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 23 02:27:00 2012] Initial guess for spatial extent in simple fitting = 15.72"
[Wed May 23 02:27:00 2012] source mask rpix=3.6, npix_max = 67, mask sum = 64, frac = 0.946
[Wed May 23 02:27:00 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 15.72"
[Thu May 24 17:33:40 2012] fullrun_pn_xmm0110011001_pi300-10000_cl_pass1_src12.ximg exists
[Thu May 24 17:33:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011001_pi300-10000_cl_pass1_src12.csv
[Thu May 24 17:33:40 2012] fullrun_pn_xmm0110011001_pi300-10000_cl_pass1_src12_1.ximg exists
[Thu May 24 17:33:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011001_pi300-10000_cl_pass1_src12.csv
[Thu May 24 17:33:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110011001_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110011001_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 17:33:40 2012] fullrun_pn_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Thu May 24 17:33:40 2012] fullrun_pn_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Thu May 24 17:33:40 2012] Fit fullrun_pn_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Fri May 25 18:20:42 2012] Warning, spatial fit 12 centroid is now closest to src. 20
[Fri May 25 18:20:42 2012] Vigneting correction estimate = 1.000000
[Fri May 25 18:20:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 18:20:42 2012] Assessing source extent using major axis lower bound
[Fri May 25 18:20:42 2012] Source does appear to be extended
[Fri May 25 18:20:42 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.50
[Fri May 25 18:20:56 2012] Counts = 74464.000000, rescaling region sizes by 3.000000
[Fri May 25 18:20:56 2012] XMMSAS src. selection expression = ellipse(24053.982000, 25672.392000, 2828.880081, 2828.880081, -0.000000, X, Y)
[Fri May 25 18:20:56 2012] Writing source region out to fullrun_pn_xmm0110011001_pi300-10000_pass1_cl_src12_src.reg
[Fri May 25 18:20:56 2012] Extracting stamp from image fullrun_pn_xmm0110011001_pi300-10000_cl_sm2.00.img.gz, (114, 133) - (440, 458)
[Fri May 25 18:20:56 2012] XMMSAS bgd. selection expression = annulus(24053.982000, 25672.392000, 14144.400407, 28288.800814, X, Y) && !ellipse(21020.358000, 28161.430000, 4330.056125, 4330.056125, 0.000000, X, Y) && !ellipse(21598.952111, 28540.380752, 7380.609528, 6711.616150, 83.929619, X, Y) && !ellipse(23587.053400, 28621.110000, 7387.776213, 7387.776213, 0.000000, X, Y) && !ellipse(23690.178200, 28056.924800, 3693.888106, 3693.888106, 0.000000, X, Y) && !ellipse(22329.279022, 27251.982117, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(20301.974319, 26744.895416, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24718.289600, 26423.904000, 5693.352164, 5693.352164, 0.000000, X, Y) && !ellipse(22517.044000, 25194.728000, 7495.440216, 7495.440216, 0.000000, X, Y) && !ellipse(20968.818000, 26021.388000, 7973.400229, 7973.400229, 0.000000, X, Y) && !ellipse(24914.068000, 26698.558000, 3345.600096, 3345.600096, 0.000000, X, Y) && !ellipse(20469.396000, 26472.336000, 4220.616121, 4220.616121, 0.000000, X, Y) && !ellipse(22913.144600, 24844.080000, 3747.720108, 3747.720108, 0.000000, X, Y) && !ellipse(23111.526000, 28817.392800, 3907.128112, 3907.128112, 0.000000, X, Y) && !ellipse(22467.205139, 26760.002533, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(20308.443298, 28612.034149, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21561.930420, 29110.887604, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(19242.297699, 28246.861420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21245.283661, 21690.648895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23482.137878, 24089.659027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22602.972600, 29278.784000, 4126.344119, 4126.344119, 0.000000, X, Y) && !ellipse(21617.789581, 31038.868988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25821.117798, 22605.826874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22133.124130, 31221.829712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24476.528656, 23670.833466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25782.009216, 31353.723602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27374.668365, 29348.648132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25757.192657, 24186.570251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25343.767426, 24011.335663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24944.196136, 22210.573990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27551.957947, 24906.186737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25465.030579, 22425.635345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23022.456726, 21979.927612, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 25 18:20:56 2012] Writing fullrun_pn_xmm0110011001_pi300-10000_pass1_cl_src12.gif