[Sun May 20 17:23:52 2012] Detection parameters:
  Position = (255.2, 332.9) = 23 23 28.58 58 50 28.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95051.7 +/- 368.6
  Background counts = 378.9
  Rate = 6 +/- 0.02

[Sun May 20 17:23:52 2012] Off-axis axis estimate = 4.00'
[Tue May 22 09:22:28 2012] Using EEF radius (= 8.43 ")to estimate initial spatial extent for simple fitting
[Tue May 22 09:22:28 2012] Initial guess for spatial extent in simple fitting = 8.43"
[Tue May 22 09:22:28 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.051
[Tue May 22 09:22:28 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.43"
[Wed May 23 02:25:56 2012] fullrun_mos2_xmm0110011001_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 23 02:25:56 2012] fullrun_mos2_xmm0110011001_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 23 02:25:56 2012] Fit fullrun_mos2_xmm0110011001_pi300-10000_cl_pass0_src3 appears to have run properly
[Wed May 23 02:25:57 2012] fullrun_mos2_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 23 02:25:57 2012] fullrun_mos2_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 23 02:25:57 2012] Fit fullrun_mos2_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed May 23 02:26:44 2012] Spatial fit model total counts = 293562.000000, observed total counts = 285620.000000
[Wed May 23 02:26:44 2012] Offset between fit and detection position for source 28 = 2.310559 pixels
[Wed May 23 02:26:44 2012] 272052.000000 total counts/ 25600.000000 bgd. counts: snr = 1540.325000
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 2.310559 pixels
  Position = (257.3, 331.9) = 23 23 27.42 58 50 23.6
  Extent = 16.9 (16.9-33.7)", rotation angle = 0
  Source counts = 246452.0 +/- 521.6
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.03
[Wed May 23 02:26:44 2012] Vigneting correction estimate = 1.000000
[Wed May 23 02:26:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 02:26:44 2012] Assessing source extent using major axis lower bound
[Wed May 23 02:26:44 2012] Source does appear to be extended
[Wed May 23 02:26:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 02:26:44 2012] Source is confused with source 2
[Thu May 24 19:15:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 19:15:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 24 19:15:48 2012] Initial guess for spatial extent in simple fitting = 16.86"
[Thu May 24 19:15:48 2012] source mask rpix=3.9, npix_max = 76, mask sum = 72, frac = 0.940
[Thu May 24 19:15:48 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 16.86"
[Fri May 25 18:20:31 2012] fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_src3.ximg exists
[Fri May 25 18:20:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_src3.csv
[Fri May 25 18:20:31 2012] fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri May 25 18:20:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_src3.csv
[Fri May 25 18:20:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 18:20:32 2012] fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri May 25 18:20:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri May 25 18:20:32 2012] fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri May 25 18:20:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri May 25 18:20:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 18:20:47 2012] Spatial fit model total counts = 479578.000000, observed total counts = 568424.000000
[Fri May 25 18:20:47 2012] Poor agreement between spatial fit and data for source 28
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 25 18:20:47 2012] Vigneting correction estimate = 1.000000
[Fri May 25 18:20:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 18:20:47 2012] Assessing source extent using major axis lower bound
[Fri May 25 18:20:47 2012] Source does appear to be extended
[Fri May 25 18:20:47 2012] Computing asymmetry using major and minor axis, asym = 1.00