[Sun May 20 17:23:50 2012] Detection parameters:
  Position = (267.9, 332.0) = 23 23 21.49 58 50 25.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128834.3 +/- 434.7
  Background counts = 434.6
  Rate = 8 +/- 0.03

[Sun May 20 17:23:52 2012] Off-axis axis estimate = 3.29'
[Tue May 22 09:22:28 2012] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Tue May 22 09:22:28 2012] Initial guess for spatial extent in simple fitting = 8.07"
[Tue May 22 09:22:28 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.721
[Tue May 22 09:22:28 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.07"
[Wed May 23 02:25:56 2012] fullrun_mos2_xmm0110011001_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 23 02:25:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011001_pi300-10000_cl_pass0_src1.csv
[Wed May 23 02:25:56 2012] fullrun_mos2_xmm0110011001_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 23 02:25:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011001_pi300-10000_cl_pass0_src1.csv
[Wed May 23 02:25:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110011001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110011001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 02:25:57 2012] fullrun_mos2_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 23 02:25:57 2012] fullrun_mos2_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 23 02:25:57 2012] Fit fullrun_mos2_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May 23 02:26:44 2012] Spatial fit model total counts = 414422.000000, observed total counts = 423448.000000
[Wed May 23 02:26:44 2012] Offset between fit and detection position for source 2 = 1.986697 pixels
[Wed May 23 02:26:44 2012] 395930.000000 total counts/ 25600.000000 bgd. counts: snr = 2314.562500
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.986697 pixels
  Position = (265.9, 332.3) = 23 23 22.59 58 50 25.4
  Extent = 16.1 (16.1-32.3)", rotation angle = 0
  Source counts = 370330.0 +/- 629.2
  Background counts = 25600.0
  Rate = 2e+01 +/- 0.04
[Wed May 23 02:26:44 2012] Vigneting correction estimate = 1.000000
[Wed May 23 02:26:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 02:26:44 2012] Assessing source extent using major axis lower bound
[Wed May 23 02:26:44 2012] Source does appear to be extended
[Wed May 23 02:26:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 02:26:44 2012] Source is confused with source 28
[Wed May 23 02:26:44 2012] Source is confused with source 4
[Thu May 24 19:15:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 19:15:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 24 19:15:48 2012] Initial guess for spatial extent in simple fitting = 16.15"
[Thu May 24 19:15:48 2012] source mask rpix=3.7, npix_max = 70, mask sum = 60, frac = 0.846
[Thu May 24 19:15:48 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 16.15"
[Fri May 25 18:20:31 2012] fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 25 18:20:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_src1.csv
[Fri May 25 18:20:31 2012] fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 25 18:20:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_src1.csv
[Fri May 25 18:20:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 18:20:31 2012] fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 25 18:20:31 2012] fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 25 18:20:31 2012] Fit fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri May 25 18:20:47 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Fri May 25 18:20:47 2012] Spatial fit model total counts = 611053.000000, observed total counts = 621525.000000
[Fri May 25 18:20:47 2012] Offset between fit and detection position for source 2 = 1.329069 pixels
[Fri May 25 18:20:47 2012] Warning, changing simple spatial fit ID from 1 to 6
[Fri May 25 18:20:47 2012] 591919.000000 total counts/ 44100.000000 bgd. counts: snr = 2608.661905
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.329069 pixels
  Position = (266.3, 331.0) = 23 23 22.38 58 50 19.9
  Extent = 30.2 (30.0-30.3)", rotation angle = 0
  Source counts = 547819.0 +/- 769.4
  Background counts = 44100.0
  Rate = 3e+01 +/- 0.05
[Fri May 25 18:20:47 2012] Vigneting correction estimate = 1.000000
[Fri May 25 18:20:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 18:20:47 2012] Assessing source extent using major axis lower bound
[Fri May 25 18:20:47 2012] Source does appear to be extended
[Fri May 25 18:20:47 2012] Computing asymmetry using major and minor axis, asym = 1.00