[Sun May 20 17:23:51 2012] Detection parameters:
  Position = (274.9, 292.9) = 23 23 17.55 58 47 34.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33898.9 +/- 228.4
  Background counts = 317.8
  Rate = 2 +/- 0.01

[Sun May 20 17:23:52 2012] Off-axis axis estimate = 1.75'
[Tue May 22 09:22:28 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Tue May 22 09:22:28 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Tue May 22 09:22:28 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.842
[Tue May 22 09:22:28 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.31"
[Wed May 23 02:25:56 2012] fullrun_mos2_xmm0110011001_pi300-10000_cl_pass0_src12.ximg exists
[Wed May 23 02:25:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011001_pi300-10000_cl_pass0_src12.csv
[Wed May 23 02:25:56 2012] fullrun_mos2_xmm0110011001_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed May 23 02:25:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011001_pi300-10000_cl_pass0_src12.csv
[Wed May 23 02:25:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110011001_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110011001_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 02:25:57 2012] fullrun_mos2_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed May 23 02:25:57 2012] fullrun_mos2_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed May 23 02:25:57 2012] Fit fullrun_mos2_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Wed May 23 02:26:44 2012] Spatial fit model total counts = 124328.000000, observed total counts = 130464.000000
[Wed May 23 02:26:44 2012] Offset between fit and detection position for source 16 = 3.169894 pixels
[Wed May 23 02:26:44 2012] 105800.800000 total counts/ 25600.000000 bgd. counts: snr = 501.255000
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 3.169894 pixels
  Position = (277.2, 295.0) = 23 23 16.25 58 47 43.5
  Extent = 14.6 (14.6-29.2)", rotation angle = 0
  Source counts = 80200.8 +/- 325.3
  Background counts = 25600.0
  Rate = 5 +/- 0.02
[Wed May 23 02:26:44 2012] Vigneting correction estimate = 1.000000
[Wed May 23 02:26:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 02:26:44 2012] Assessing source extent using major axis lower bound
[Wed May 23 02:26:44 2012] Source does appear to be extended
[Wed May 23 02:26:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 19:15:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 19:15:48 2012] Initial guess for spatial extent in simple fitting = 14.61"
[Thu May 24 19:15:48 2012] source mask rpix=3.4, npix_max = 59, mask sum = 64, frac = 1.075
[Thu May 24 19:15:48 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 14.61"
[Fri May 25 18:20:31 2012] fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_src12.ximg exists
[Fri May 25 18:20:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_src12.csv
[Fri May 25 18:20:31 2012] fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri May 25 18:20:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_src12.csv
[Fri May 25 18:20:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 18:20:32 2012] fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri May 25 18:20:32 2012] fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri May 25 18:20:32 2012] Fit fullrun_mos2_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Fri May 25 18:20:47 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 10.184494 pixels away
[Fri May 25 18:20:47 2012] Vigneting correction estimate = 1.000000
[Fri May 25 18:20:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 18:20:47 2012] Assessing source extent using major axis lower bound
[Fri May 25 18:20:47 2012] Source does appear to be extended
[Fri May 25 18:20:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 18:20:47 2012] Source is confused with source 18