[Sun May 20 17:23:19 2012] Detection parameters:
  Position = (195.7, 300.6) = 23 24 1.90 58 48 0.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 256.6 +/- 25.8
  Background counts = 246.3
  Rate = 0.02 +/- 0.002

[Sun May 20 17:23:21 2012] Off-axis axis estimate = 7.45'
[Tue May 22 06:13:44 2012] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Tue May 22 06:13:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 22 06:13:44 2012] Initial guess for spatial extent in simple fitting = 10.15"
[Tue May 22 06:13:44 2012] source mask rpix=2.3, npix_max = 32, mask sum = 20, frac = 0.622
[Tue May 22 06:13:44 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.15"
[Tue May 22 09:22:26 2012] fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_src5.ximg exists
[Tue May 22 09:22:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_src5.csv
[Tue May 22 09:22:26 2012] fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue May 22 09:22:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_src5.csv
[Tue May 22 09:22:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 09:22:27 2012] fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue May 22 09:22:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue May 22 09:22:27 2012] fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue May 22 09:22:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue May 22 09:22:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 02:26:35 2012] Warning, spatial fit 5 centroid is now closest to src. 23
[Wed May 23 02:26:35 2012] Source 4 is offset by 2.823710 and 5.444997 pixels which is larger than
2 X fitted extent = 1.142768 x 1.142768, not incorporating fit results
[Wed May 23 02:26:35 2012] Vigneting correction estimate = 1.000000
[Wed May 23 02:26:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 02:26:35 2012] Assessing source extent using major
[Wed May 23 02:26:35 2012] Source does appear to be extended
[Wed May 23 02:26:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 17:33:41 2012] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Thu May 24 17:33:41 2012] Initial guess for spatial extent in simple fitting = 10.15"
[Thu May 24 17:33:41 2012] source mask rpix=2.3, npix_max = 32, mask sum = 20, frac = 0.622
[Thu May 24 17:33:41 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.15"
[Thu May 24 19:15:48 2012] fullrun_mos1_xmm0110011001_pi300-10000_cl_pass1_src5.ximg exists
[Thu May 24 19:15:48 2012] fullrun_mos1_xmm0110011001_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu May 24 19:15:48 2012] Fit fullrun_mos1_xmm0110011001_pi300-10000_cl_pass1_src5 appears to have run properly
[Thu May 24 19:15:48 2012] fullrun_mos1_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu May 24 19:15:48 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu May 24 19:15:48 2012] fullrun_mos1_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu May 24 19:15:48 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu May 24 19:15:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 18:20:44 2012] Spatial fit model total counts = -4641.560000, observed total counts = 2361.000000
[Fri May 25 18:20:44 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 25 18:20:44 2012] Vigneting correction estimate = 1.000000
[Fri May 25 18:20:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 18:20:44 2012] Assessing source extent using major
[Fri May 25 18:20:44 2012] Source does appear to be extended
[Fri May 25 18:20:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 18:20:44 2012] Deleting source due to low Poisson probability 1.0