[Sun May 20 17:23:21 2012] Detection parameters:
  Position = (266.1, 393.8) = 23 23 22.52 58 54 51.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.7 +/- 20.2
  Background counts = 128.4
  Rate = 0.005 +/- 0.001

[Sun May 20 17:23:21 2012] Off-axis axis estimate = 7.30'
[Tue May 22 06:13:44 2012] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Tue May 22 06:13:44 2012] Initial guess for spatial extent in simple fitting = 10.08"
[Tue May 22 06:13:44 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.134
[Tue May 22 06:13:44 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 10.08"
[Tue May 22 09:22:27 2012] fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_src30.ximg exists
[Tue May 22 09:22:27 2012] fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_src30_1.ximg exists
[Tue May 22 09:22:27 2012] Fit fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_src30 appears to have run properly
[Tue May 22 09:22:28 2012] fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Tue May 22 09:22:28 2012] fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Tue May 22 09:22:28 2012] Fit fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Wed May 23 02:26:35 2012] Spatial fit model total counts = 1920.920000, observed total counts = 1919.000000
[Wed May 23 02:26:35 2012] Offset between fit and detection position for source 32 = 3.831910 pixels
[Wed May 23 02:26:35 2012] 1736.031000 total counts/ 1305.810000 bgd. counts: snr = 11.905609
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 3.831910 pixels
  Position = (268.5, 390.7) = 23 23 21.20 58 54 39.8
  Extent = 20.2 (20.1-40.3)", rotation angle = 0
  Source counts = 430.2 +/- 41.7
  Background counts = 1305.8
  Rate = 0.02 +/- 0.002
[Wed May 23 02:26:35 2012] Vigneting correction estimate = 1.000000
[Wed May 23 02:26:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 02:26:35 2012] Assessing source extent using major axis lower bound
[Wed May 23 02:26:35 2012] Source does appear to be extended
[Wed May 23 02:26:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 02:26:35 2012] Source is confused with source 13
[Thu May 24 17:33:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 17:33:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 24 17:33:41 2012] Initial guess for spatial extent in simple fitting = 20.15"
[Thu May 24 17:33:41 2012] source mask rpix=4.6, npix_max = 105, mask sum = 105, frac = 0.996
[Thu May 24 17:33:41 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 20.15"
[Thu May 24 19:15:48 2012] fullrun_mos1_xmm0110011001_pi300-10000_cl_pass1_src10.ximg exists
[Thu May 24 19:15:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011001_pi300-10000_cl_pass1_src10.csv
[Thu May 24 19:15:48 2012] fullrun_mos1_xmm0110011001_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu May 24 19:15:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011001_pi300-10000_cl_pass1_src10.csv
[Thu May 24 19:15:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110011001_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110011001_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 19:15:48 2012] fullrun_mos1_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu May 24 19:15:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu May 24 19:15:48 2012] fullrun_mos1_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu May 24 19:15:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu May 24 19:15:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110011001_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 18:20:44 2012] Warning, spatial fit 10 centroid is now closest to src. 13
[Fri May 25 18:20:44 2012] Vigneting correction estimate = 1.000000
[Fri May 25 18:20:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 18:20:44 2012] Assessing source extent using major axis lower bound
[Fri May 25 18:20:44 2012] Source does appear to be extended
[Fri May 25 18:20:44 2012] Computing asymmetry using major and minor axis, asym = 1.00