[Sun May 20 17:23:19 2012] Detection parameters:
  Position = (207.1, 272.8) = 23 23 55.45 58 46 12.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 152.7 +/- 18.9
  Background counts = 199.4
  Rate = 0.01 +/- 0.002

[Sun May 20 17:23:21 2012] Off-axis axis estimate = 6.87'
[Tue May 22 06:13:44 2012] Using EEF radius (= 9.87 ")to estimate initial spatial extent for simple fitting
[Tue May 22 06:13:44 2012] Initial guess for spatial extent in simple fitting = 9.87"
[Tue May 22 06:13:44 2012] source mask rpix=2.3, npix_max = 30, mask sum = 26, frac = 0.848
[Tue May 22 06:13:44 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 9.87"
[Tue May 22 09:22:26 2012] fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_src11.ximg exists
[Tue May 22 09:22:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_src11.csv
[Tue May 22 09:22:26 2012] fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue May 22 09:22:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_src11.csv
[Tue May 22 09:22:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 09:22:27 2012] fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue May 22 09:22:27 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src11.csv
[Tue May 22 09:22:27 2012] fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue May 22 09:22:27 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src11.csv
[Tue May 22 09:22:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110011001_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 02:26:35 2012] Warning, spatial fit 11 centroid is now closest to src. 16
[Wed May 23 02:26:35 2012] Vigneting correction estimate = 1.000000
[Wed May 23 02:26:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 02:26:35 2012] Assessing source extent using major
[Wed May 23 02:26:35 2012] Source does appear to be extended
[Wed May 23 02:26:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 02:26:35 2012] Deleting source due to low Poisson probability 0.9