[Sat Jun 22 00:45:31 2013] Detection parameters:
  Position = (269.2, 326.9) = 14 43 18.08 -62 37 6.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 173.2 +/- 20.1
  Background counts = 126.8
  Rate = 0.01 +/- 0.002

[Sat Jun 22 00:45:39 2013] Off-axis axis estimate = 2.95'
[Sat Jun 22 00:47:45 2013] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:47:45 2013] Initial guess for spatial extent in simple fitting = 7.91"
[Sat Jun 22 00:47:45 2013] source mask rpix=1.8, npix_max = 21, mask sum = 18, frac = 0.838
[Sat Jun 22 00:47:45 2013] Giving source the simple spatial ID 91 for pass 0, mean size = 7.91"
[Sat Jun 22 00:47:50 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src91.ximg exists
[Sat Jun 22 00:47:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src91.csv
[Sat Jun 22 00:47:50 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src91_1.ximg exists
[Sat Jun 22 00:47:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src91.csv
[Sat Jun 22 00:47:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src91_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:47:53 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src91.ximg exists
[Sat Jun 22 00:47:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src91.csv
[Sat Jun 22 00:47:53 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src91_1.ximg exists
[Sat Jun 22 00:47:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src91.csv
[Sat Jun 22 00:47:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src91_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:50 2013] Warning, spatial fit 91 centroid is now closest to src. 105
[Sat Jun 22 00:48:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:48:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:48:50 2013] Assessing source extent using major
[Sat Jun 22 00:48:50 2013] Source does appear to be extended
[Sat Jun 22 00:48:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:48:50 2013] Source is confused with source 96
[Sat Jun 22 00:50:29 2013] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:29 2013] Initial guess for spatial extent in simple fitting = 7.91"
[Sat Jun 22 00:50:29 2013] source mask rpix=1.8, npix_max = 21, mask sum = 18, frac = 0.838
[Sat Jun 22 00:50:29 2013] Giving source the simple spatial ID 68 for pass 1, mean size = 7.91"
[Sat Jun 22 00:50:33 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src68.ximg exists
[Sat Jun 22 00:50:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src68.csv
[Sat Jun 22 00:50:33 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src68_1.ximg exists
[Sat Jun 22 00:50:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src68.csv
[Sat Jun 22 00:50:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src68_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:50:41 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src68.ximg exists
[Sat Jun 22 00:50:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src68.csv
[Sat Jun 22 00:50:41 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists
[Sat Jun 22 00:50:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src68.csv
[Sat Jun 22 00:50:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src68_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:51:37 2013] Warning, spatial fit 68 centroid is now closest to src. 94
[Sat Jun 22 00:51:38 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:51:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:51:38 2013] Assessing source extent using major
[Sat Jun 22 00:51:38 2013] Source does appear to be extended
[Sat Jun 22 00:51:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:53:14 2013] XMMSAS src. selection expression = ellipse(23375.740234, 28390.031219, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 00:53:14 2013] Not overwriting source region fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src95_src.reg
[Sat Jun 22 00:53:14 2013] Extracting stamp from image fullrun_pn_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (232, 289) - (307, 364)
[Sat Jun 22 00:53:14 2013] XMMSAS bgd. selection expression = annulus(23375.740234, 28390.031219, 1087.500000, 2175.000000, X, Y) && !ellipse(30589.872000, 19523.320000, 10095.168290, 10095.168290, 0.000000, X, Y) && !ellipse(22203.116013, 28997.196594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20787.542000, 29355.704000, 1396.416040, 1396.416040, 0.000000, X, Y) && !ellipse(22966.410000, 28383.236200, 1298.480037, 1298.480037, 0.000000, X, Y) && !ellipse(21796.804932, 28650.022308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23764.210846, 27390.428619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21791.097946, 27695.300323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25530.097382, 27453.613007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22847.973511, 27124.915070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21373.415375, 26594.495972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23543.027120, 26534.771200, 815.216023, 815.216023, 0.000000, X, Y) && !ellipse(25347.471191, 26129.841949, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 00:53:14 2013] Writing fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src95.gif
[Sat Jun 22 01:04:07 2013] Mean detx,y = (-2710.37, -1754.59) 
[Sat Jun 22 01:04:14 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 01:04:56 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 01:04:57 2013] Setting source spectrum file to fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src95_src_b10.pi.gz
[Sat Jun 22 01:04:57 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src95_bgd.pi.gz
[Sat Jun 22 03:35:56 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 03:35:56 2013] rmf not generated due to insufficient counts
[Sat Jun 22 04:10:36 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:10:36 2013] Total counts from fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src95_src_b10.pi.gz = 1130.00
[Sat Jun 22 04:10:36 2013] Total counts from fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src95_bgd.pi.gz = 2288.00
[Sat Jun 22 04:10:36 2013] Got source and background scale factors 1030877.000000, 3528375.000000
[Sat Jun 22 04:10:36 2013] User source parameters:
  Position = (269.2, 326.9) = 14 43 18.08 -62 37 6.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 461.5 +/- 34.6
  Background aperture counts = 668.5
  Rate = 0.03 +/- 0.002

[Sat Jun 22 04:10:36 2013] Updating counts from extracted products
[Sat Jun 22 04:10:36 2013] Set source signif. to 461.52/25.85 = 17.85
[Sat Jun 22 04:10:47 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:10:47 2013] Using photon index=1.80, rate=0.027, arf fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src95.arf
[Sat Jun 22 04:10:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:10:48 2013] Updating source flux to 1.9e-13
[Sat Jun 22 04:14:22 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 04:14:57 2013] xmm0110010701/analysis//spectral/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src95_pl.csv not found, spectral fit skipped or did not complete