[Sat Jun 22 00:45:28 2013] Detection parameters:
  Position = (317.0, 224.1) = 14 42 47.95 -62 44 38.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 336.5 +/- 29.3
  Background counts = 210.5
  Rate = 0.03 +/- 0.003

[Sat Jun 22 00:45:39 2013] Off-axis axis estimate = 5.55'
[Sat Jun 22 00:47:45 2013] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:47:45 2013] Initial guess for spatial extent in simple fitting = 9.21"
[Sat Jun 22 00:47:45 2013] source mask rpix=2.1, npix_max = 27, mask sum = 29, frac = 1.059
[Sat Jun 22 00:47:45 2013] Giving source the simple spatial ID 60 for pass 0, mean size = 9.21"
[Sat Jun 22 00:47:49 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src60.ximg exists
[Sat Jun 22 00:47:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src60.csv
[Sat Jun 22 00:47:49 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src60_1.ximg exists
[Sat Jun 22 00:47:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src60.csv
[Sat Jun 22 00:47:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:47:52 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Sat Jun 22 00:47:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src60.csv
[Sat Jun 22 00:47:52 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Sat Jun 22 00:47:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src60.csv
[Sat Jun 22 00:47:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:50 2013] Spatial fit model total counts = 4784.800000, observed total counts = 4783.000000
[Sat Jun 22 00:48:50 2013] Offset between fit and detection position for source 63 = 1.244508 pixels
[Sat Jun 22 00:48:50 2013] Warning, changing simple spatial fit ID from 60 to 58
[Sat Jun 22 00:48:50 2013] 4772.428000 total counts/ 4638.210000 bgd. counts: snr = 1.970768
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 1.244508 pixels
  Position = (315.8, 223.7) = 14 42 48.69 -62 44 39.0
  Extent = 11.1 (6.3-18.1)", rotation angle = 0
  Source counts = 134.2 +/- 69.1
  Background counts = 4638.2
  Rate = 0.008 +/- 0.004
[Sat Jun 22 00:48:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:48:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:48:50 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 00:48:50 2013] Source does appear to be extended
[Sat Jun 22 00:48:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:48:50 2013] Source is confused with source 59
[Sat Jun 22 00:50:29 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:29 2013] Initial guess for spatial extent in simple fitting = 11.15"
[Sat Jun 22 00:50:29 2013] source mask rpix=2.6, npix_max = 37, mask sum = 23, frac = 0.613
[Sat Jun 22 00:50:29 2013] Giving source the simple spatial ID 59 for pass 1, mean size = 11.15"
[Sat Jun 22 00:50:33 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src59.ximg exists
[Sat Jun 22 00:50:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src59.csv
[Sat Jun 22 00:50:33 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src59_1.ximg exists
[Sat Jun 22 00:50:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src59.csv
[Sat Jun 22 00:50:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:50:41 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Sat Jun 22 00:50:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src59.csv
[Sat Jun 22 00:50:41 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Sat Jun 22 00:50:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src59.csv
[Sat Jun 22 00:50:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:51:37 2013] Spatial fit model total counts = 4781.530000, observed total counts = 4783.000000
[Sat Jun 22 00:51:37 2013] Offset between fit and detection position for source 63 = 0.363319 pixels
[Sat Jun 22 00:51:37 2013] Warning, changing simple spatial fit ID from 59 to 57
[Sat Jun 22 00:51:37 2013] 4807.039000 total counts/ 4635.080000 bgd. counts: snr = 2.525784
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 0.363319 pixels
  Position = (315.7, 223.3) = 14 42 48.77 -62 44 40.5
  Extent = 13.1 (5.6-18.1)", rotation angle = 0
  Source counts = 172.0 +/- 69.3
  Background counts = 4635.1
  Rate = 0.01 +/- 0.004
[Sat Jun 22 00:51:37 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:51:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:51:37 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 00:51:37 2013] Source does appear to be extended
[Sat Jun 22 00:51:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:53:14 2013] XMMSAS src. selection expression = ellipse(27414.386000, 19382.490000, 785.424023, 785.424023, 0.000000, X, Y)
[Sat Jun 22 00:53:14 2013] Not overwriting source region fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src63_src.reg
[Sat Jun 22 00:53:14 2013] Extracting stamp from image fullrun_pn_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (271, 178) - (361, 268)
[Sat Jun 22 00:53:14 2013] XMMSAS bgd. selection expression = annulus(27414.386000, 19382.490000, 1309.040038, 2618.080075, X, Y) && !ellipse(30589.872000, 19523.320000, 10095.168290, 10095.168290, 0.000000, X, Y) && !ellipse(31379.966000, 18530.680000, 1682.528048, 1682.528048, 0.000000, X, Y) && !ellipse(29945.792000, 20144.512000, 3052.992088, 3052.992088, 0.000000, X, Y) && !ellipse(29464.330000, 20596.486000, 1447.368042, 1447.368042, 0.000000, X, Y) && !ellipse(28910.455000, 21005.247600, 1531.608044, 814.312023, 212.573000, X, Y) && !ellipse(29305.650000, 20521.342000, 1559.728045, 1559.728045, 0.000000, X, Y) && !ellipse(31008.278000, 19111.894000, 2242.576065, 2242.576065, 0.000000, X, Y) && !ellipse(26341.204000, 19548.770400, 1449.152042, 1449.152042, 0.000000, X, Y) && !ellipse(30326.430000, 21740.646000, 1447.368042, 1447.368042, 0.000000, X, Y) && !ellipse(30047.380157, 21183.697601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30727.816376, 21101.586838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25350.290833, 20685.794647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24045.906000, 20846.426000, 1389.488040, 1389.488040, 0.000000, X, Y) && !ellipse(27367.560852, 20059.011261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24553.110321, 20478.805908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28128.712616, 19962.500946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28632.318573, 19188.023590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30449.423279, 18420.590027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29956.519745, 18661.086563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29144.680000, 22985.316400, 1301.768037, 1301.768037, 0.000000, X, Y) && !ellipse(28201.224121, 22492.844757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30873.696960, 22132.386032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28196.380000, 21489.516000, 2345.920068, 2345.920068, 0.000000, X, Y) && !ellipse(26162.910339, 21258.536240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28595.615448, 20129.183685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28137.672000, 19132.814200, 1512.264044, 1512.264044, 0.000000, X, Y)
[Sat Jun 22 00:53:14 2013] Writing fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src63.gif
[Sat Jun 22 00:56:31 2013] Mean detx,y = (-1811.27, 8066.10) 
[Sat Jun 22 00:56:36 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 00:57:10 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 00:57:10 2013] Setting source spectrum file to fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Sat Jun 22 00:57:10 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Sat Jun 22 04:10:34 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:10:34 2013] Total counts from fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src63_src_b10.pi.gz = 3015.00
[Sat Jun 22 04:10:34 2013] Total counts from fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src63_bgd.pi.gz = 0.00
[Sat Jun 22 04:10:34 2013] Got source and background scale factors 1527440.000000, 0.000000
[Sat Jun 22 04:10:34 2013] Background scale factor is not positive, halting re-assessment of this source
[Sat Jun 22 04:10:47 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:10:47 2013] Using photon index=1.80, rate=0.0101, arf fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src63.arf
[Sat Jun 22 04:10:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:10:47 2013] Updating source flux to 8.9e-14
[Sat Jun 22 04:14:22 2013] Flag c found in src. 63 procflags, skipping spectral fitting
[Sat Jun 22 04:14:57 2013] xmm0110010701/analysis//spectral/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src63_pl.csv not found, spectral fit skipped or did not complete