[Sat Jun 22 00:45:28 2013] Detection parameters:
  Position = (295.8, 231.1) = 14 43 1.33 -62 44 3.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 384.7 +/- 30.5
  Background counts = 139.2
  Rate = 0.04 +/- 0.003

[Sat Jun 22 00:45:39 2013] Off-axis axis estimate = 4.89'
[Sat Jun 22 00:47:45 2013] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:47:45 2013] Initial guess for spatial extent in simple fitting = 8.87"
[Sat Jun 22 00:47:45 2013] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.930
[Sat Jun 22 00:47:45 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 8.87"
[Sat Jun 22 00:47:49 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src55.ximg exists
[Sat Jun 22 00:47:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src55.csv
[Sat Jun 22 00:47:49 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src55_1.ximg exists
[Sat Jun 22 00:47:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src55.csv
[Sat Jun 22 00:47:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:47:52 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Sat Jun 22 00:47:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src55.csv
[Sat Jun 22 00:47:52 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Sat Jun 22 00:47:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src55.csv
[Sat Jun 22 00:47:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:50 2013] Spatial fit model total counts = 2671.430000, observed total counts = 2678.000000
[Sat Jun 22 00:48:50 2013] Offset between fit and detection position for source 58 = 0.769086 pixels
[Sat Jun 22 00:48:50 2013] Warning, changing simple spatial fit ID from 55 to 52
[Sat Jun 22 00:48:50 2013] 2678.366800 total counts/ 2667.540000 bgd. counts: snr = 0.209626
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 0.769086 pixels
  Position = (295.6, 231.8) = 14 43 1.45 -62 44 3.7
  Extent = 2.2" x 2.2", rotation angle = 359
  Source counts = 10.8 +/- 51.8
  Background counts = 2667.5
  Rate = 0.0006 +/- 0.003
  Deleting source due to low Poisson probability