[Sat Jun 22 00:45:27 2013] Detection parameters:
  Position = (353.8, 243.1) = 14 42 24.68 -62 43 17.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 287.0 +/- 38.6
  Background counts = 553.2
  Rate = 0.03 +/- 0.003

[Sat Jun 22 00:45:39 2013] Off-axis axis estimate = 5.67'
[Sat Jun 22 00:47:45 2013] Using EEF radius (= 9.26 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:47:45 2013] Initial guess for spatial extent in simple fitting = 9.26"
[Sat Jun 22 00:47:45 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.084
[Sat Jun 22 00:47:45 2013] Giving source the simple spatial ID 51 for pass 0, mean size = 9.26"
[Sat Jun 22 00:47:49 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src51.ximg exists
[Sat Jun 22 00:47:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src51.csv
[Sat Jun 22 00:47:49 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src51_1.ximg exists
[Sat Jun 22 00:47:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src51.csv
[Sat Jun 22 00:47:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:47:52 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Sat Jun 22 00:47:52 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Sat Jun 22 00:47:52 2013] Fit fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Sat Jun 22 00:48:50 2013] Spatial fit model total counts = 8064.650000, observed total counts = 5407.000000
[Sat Jun 22 00:48:50 2013] Poor agreement between spatial fit and data for source 54
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 00:48:50 2013] Warning, spatial fit 51 centroid is now closest to src. 51
[Sat Jun 22 00:48:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:48:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:48:50 2013] Assessing source extent using major
[Sat Jun 22 00:48:50 2013] Source does appear to be extended
[Sat Jun 22 00:48:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:48:50 2013] Source is confused with source 25
[Sat Jun 22 00:48:50 2013] Source is confused with source 52
[Sat Jun 22 00:50:29 2013] Using EEF radius (= 9.26 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:29 2013] Initial guess for spatial extent in simple fitting = 9.26"
[Sat Jun 22 00:50:29 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.084
[Sat Jun 22 00:50:29 2013] Giving source the simple spatial ID 51 for pass 1, mean size = 9.26"
[Sat Jun 22 00:50:33 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src51.ximg exists
[Sat Jun 22 00:50:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src51.csv
[Sat Jun 22 00:50:33 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src51_1.ximg exists
[Sat Jun 22 00:50:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src51.csv
[Sat Jun 22 00:50:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:50:41 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Sat Jun 22 00:50:41 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Sat Jun 22 00:50:41 2013] Fit fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Sat Jun 22 00:51:37 2013] Source 54 is offset by 2.741935 and -5.206680 pixels which is larger than
2 X fitted extent = 1.061398 x 1.061398, not incorporating fit results
[Sat Jun 22 00:51:37 2013] Source 54 is offset by 2.009862 and 7.623734 pixels which is larger than
2 X fitted extent = 1.268648 x 1.268648, not incorporating fit results
[Sat Jun 22 00:51:37 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:51:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:51:37 2013] Assessing source extent using major
[Sat Jun 22 00:51:37 2013] Source does appear to be extended
[Sat Jun 22 00:51:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:53:13 2013] XMMSAS src. selection expression = ellipse(30727.816376, 21101.586838, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 00:53:14 2013] Not overwriting source region fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src54_src.reg
[Sat Jun 22 00:53:14 2013] Extracting stamp from image fullrun_pn_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (316, 206) - (391, 281)
[Sat Jun 22 00:53:14 2013] XMMSAS bgd. selection expression = annulus(30727.816376, 21101.586838, 1087.500000, 2175.000000, X, Y) && !ellipse(30589.872000, 19523.320000, 10095.168290, 10095.168290, 0.000000, X, Y) && !ellipse(31379.966000, 18530.680000, 1682.528048, 1682.528048, 0.000000, X, Y) && !ellipse(33007.286469, 22058.365143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34100.550000, 23187.100000, 2382.304069, 2382.304069, 0.000000, X, Y) && !ellipse(29945.792000, 20144.512000, 3052.992088, 3052.992088, 0.000000, X, Y) && !ellipse(29464.330000, 20596.486000, 1447.368042, 1447.368042, 0.000000, X, Y) && !ellipse(32943.464874, 23078.376953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31310.268738, 22889.872528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31923.782288, 21350.810455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28910.455000, 21005.247600, 1531.608044, 814.312023, 212.573000, X, Y) && !ellipse(29305.650000, 20521.342000, 1559.728045, 1559.728045, 0.000000, X, Y) && !ellipse(31008.278000, 19111.894000, 2242.576065, 2242.576065, 0.000000, X, Y) && !ellipse(31305.890594, 21880.375961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30326.430000, 21740.646000, 1447.368042, 1447.368042, 0.000000, X, Y) && !ellipse(30047.380157, 21183.697601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28128.712616, 19962.500946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28632.318573, 19188.023590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30449.423279, 18420.590027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29956.519745, 18661.086563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30453.777527, 23408.280273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29144.680000, 22985.316400, 1301.768037, 1301.768037, 0.000000, X, Y) && !ellipse(30505.526703, 22931.285675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29849.463654, 22918.870758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28201.224121, 22492.844757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30873.696960, 22132.386032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28196.380000, 21489.516000, 2345.920068, 2345.920068, 0.000000, X, Y) && !ellipse(28595.615448, 20129.183685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28137.672000, 19132.814200, 1512.264044, 1512.264044, 0.000000, X, Y)
[Sat Jun 22 00:53:14 2013] Writing fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src54.gif
[Sat Jun 22 00:53:33 2013] ../../xmm0110010701/products/events/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src54_src.evt and ../../xmm0110010701/products/events/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src54_bgd.evt exist, delete to re-create
[Sat Jun 22 00:53:33 2013] Mean detx,y = (1765.62, 7656.86) 
[Sat Jun 22 00:53:33 2013] ../../xmm0110010701/products/images/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src54_src.img and ../../xmm0110010701/products/images/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src54_bgd.img exist, delete to re-create
[Sat Jun 22 00:53:33 2013] ../../xmm0110010701/products/spectra/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src54_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src54_bgd.pi exist, delete to re-create
[Sat Jun 22 00:53:33 2013] Setting source spectrum file to fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Sat Jun 22 00:53:33 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Sat Jun 22 00:53:33 2013] ../../xmm0110010701/products/lightcurves/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src54_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src54_bgd.lc exist, delete to re-create
[Sat Jun 22 03:23:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 03:23:02 2013] rmf not generated due to insufficient counts
[Sat Jun 22 04:10:32 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:10:32 2013] Total counts from fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src54_src_b10.pi.gz = 5633.00
[Sat Jun 22 04:10:32 2013] Total counts from fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src54_bgd.pi.gz = 0.00
[Sat Jun 22 04:10:33 2013] Got source and background scale factors 1340800.000000, 0.000000
[Sat Jun 22 04:10:33 2013] Background scale factor is not positive, halting re-assessment of this source
[Sat Jun 22 04:10:47 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:10:47 2013] Using photon index=1.80, rate=0.0259, arf fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src54.arf
[Sat Jun 22 04:10:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:10:47 2013] Updating source flux to 1.9e-13
[Sat Jun 22 04:14:22 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 04:14:57 2013] xmm0110010701/analysis//spectral/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src54_pl.csv not found, spectral fit skipped or did not complete