[Sat Jun 22 00:45:27 2013] Detection parameters:
  Position = (347.2, 249.9) = 14 42 28.81 -62 42 44.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 400.2 +/- 41.2
  Background counts = 518.3
  Rate = 0.03 +/- 0.004

[Sat Jun 22 00:45:39 2013] Off-axis axis estimate = 4.99'
[Sat Jun 22 00:47:45 2013] Using EEF radius (= 8.92 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:47:45 2013] Initial guess for spatial extent in simple fitting = 8.92"
[Sat Jun 22 00:47:45 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.960
[Sat Jun 22 00:47:45 2013] Giving source the simple spatial ID 49 for pass 0, mean size = 8.92"
[Sat Jun 22 00:47:49 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src49.ximg exists
[Sat Jun 22 00:47:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src49.csv
[Sat Jun 22 00:47:49 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src49_1.ximg exists
[Sat Jun 22 00:47:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src49.csv
[Sat Jun 22 00:47:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:47:52 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Sat Jun 22 00:47:52 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Sat Jun 22 00:47:52 2013] Fit fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Sat Jun 22 00:48:50 2013] Spatial fit model total counts = 7736.570000, observed total counts = 7726.000000
[Sat Jun 22 00:48:50 2013] Offset between fit and detection position for source 52 = 1.574032 pixels
[Sat Jun 22 00:48:50 2013] 7357.066000 total counts/ 6403.490000 bgd. counts: snr = 11.916451
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 1.574032 pixels
  Position = (347.9, 251.3) = 14 42 28.40 -62 42 38.5
  Extent = 17.7 (17.4-17.8)", rotation angle = 0
  Source counts = 953.6 +/- 85.8
  Background counts = 6403.5
  Rate = 0.06 +/- 0.005
[Sat Jun 22 00:48:50 2013] Spatial fit model total counts = 8593.940000, observed total counts = 8591.000000
[Sat Jun 22 00:48:50 2013] Offset between fit and detection position for source 52 = 1.539014 pixels
[Sat Jun 22 00:48:50 2013] Warning, changing simple spatial fit ID from 49 to 50
[Sat Jun 22 00:48:50 2013] 8156.410000 total counts/ 6914.750000 bgd. counts: snr = 14.931879
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 1.539014 pixels
  Position = (349.1, 250.4) = 14 42 27.61 -62 42 42.4
  Extent = 18.1 (18.1-36.2)", rotation angle = 0
  Source counts = 1241.7 +/- 90.3
  Background counts = 6914.8
  Rate = 0.07 +/- 0.005
[Sat Jun 22 00:48:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:48:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:48:50 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 00:48:50 2013] Source does appear to be extended
[Sat Jun 22 00:48:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:48:50 2013] Source is confused with source 51
[Sat Jun 22 00:50:29 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:29 2013] Initial guess for spatial extent in simple fitting = 18.09"
[Sat Jun 22 00:50:29 2013] source mask rpix=4.2, npix_max = 86, mask sum = 90, frac = 1.037
[Sat Jun 22 00:50:29 2013] Giving source the simple spatial ID 49 for pass 1, mean size = 18.09"
[Sat Jun 22 00:50:32 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src49.ximg exists
[Sat Jun 22 00:50:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src49.csv
[Sat Jun 22 00:50:32 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src49_1.ximg exists
[Sat Jun 22 00:50:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src49.csv
[Sat Jun 22 00:50:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:50:41 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Sat Jun 22 00:50:41 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Sat Jun 22 00:50:41 2013] Fit fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Sat Jun 22 00:51:37 2013] Warning, spatial fit 49 centroid is now closest to src. 25
[Sat Jun 22 00:51:37 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:51:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:51:37 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 00:51:37 2013] Source does appear to be extended
[Sat Jun 22 00:51:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:53:13 2013] Counts = 1241.660000, rescaling region sizes by 2.000000
[Sat Jun 22 00:53:13 2013] XMMSAS src. selection expression = ellipse(30326.430000, 21740.646000, 2171.052062, 2171.052062, 0.000000, X, Y)
[Sat Jun 22 00:53:13 2013] Not overwriting source region fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src52_src.reg
[Sat Jun 22 00:53:13 2013] Extracting stamp from image fullrun_pn_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (224, 126) - (474, 375)
[Sat Jun 22 00:53:13 2013] XMMSAS bgd. selection expression = annulus(30326.430000, 21740.646000, 7236.840208, 14473.680416, X, Y) && !ellipse(38767.377838, 20144.531082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39947.036560, 20317.835464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37969.599945, 19707.997803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34740.255951, 19131.191360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37162.463074, 19597.372025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33076.938507, 17681.917068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39441.192413, 20217.525803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34155.374237, 17877.003311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30589.872000, 19523.320000, 10095.168290, 10095.168290, 0.000000, X, Y) && !ellipse(31379.966000, 18530.680000, 1682.528048, 1682.528048, 0.000000, X, Y) && !ellipse(33007.286469, 22058.365143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39671.148000, 23978.424000, 1936.720056, 1936.720056, 0.000000, X, Y) && !ellipse(34100.550000, 23187.100000, 2382.304069, 2382.304069, 0.000000, X, Y) && !ellipse(38941.200000, 23682.646000, 1908.600055, 1908.600055, 0.000000, X, Y) && !ellipse(40060.629333, 22629.623901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40769.816864, 22659.267303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38428.516449, 22309.315857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39273.452972, 22401.936554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40251.573730, 21694.287613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33965.714874, 22835.324951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38141.896000, 22434.876000, 1908.600055, 1908.600055, 0.000000, X, Y) && !ellipse(37270.817474, 21788.758865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35693.015200, 21768.601800, 1740.264050, 1244.456036, 355.672920, X, Y) && !ellipse(29945.792000, 20144.512000, 3052.992088, 3052.992088, 0.000000, X, Y) && !ellipse(29464.330000, 20596.486000, 1447.368042, 1447.368042, 0.000000, X, Y) && !ellipse(18019.510681, 24851.588715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40276.111800, 24711.985800, 1096.240032, 1096.240032, 0.000000, X, Y) && !ellipse(40244.219299, 24150.886658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40948.524231, 23695.198669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40363.602692, 23537.346558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34880.774000, 23577.414600, 1675.104048, 1016.864029, 23.769000, X, Y) && !ellipse(36448.002655, 23094.054901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32943.464874, 23078.376953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36828.481628, 22400.019623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31310.268738, 22889.872528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31923.782288, 21350.810455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33800.250793, 21269.644882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28910.455000, 21005.247600, 1531.608044, 814.312023, 212.573000, X, Y) && !ellipse(29305.650000, 20521.342000, 1559.728045, 1559.728045, 0.000000, X, Y) && !ellipse(35967.028168, 20206.499466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31008.278000, 19111.894000, 2242.576065, 2242.576065, 0.000000, X, Y) && !ellipse(26341.204000, 19548.770400, 1449.152042, 1449.152042, 0.000000, X, Y) && !ellipse(38464.709808, 18756.217590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35226.874000, 29426.560600, 448.568813, 448.568813, 0.000000, X, Y) && !ellipse(18885.043594, 36157.276947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41470.698800, 25841.030000, 2057.376059, 1174.952034, 116.889400, X, Y) && !ellipse(41155.274017, 24560.193939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31554.794281, 24408.435120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41125.285461, 24129.134003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37675.932465, 23430.295776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31305.890594, 21880.375961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30047.380157, 21183.697601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30727.816376, 21101.586838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25350.290833, 20685.794647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24045.906000, 20846.426000, 1389.488040, 1389.488040, 0.000000, X, Y) && !ellipse(33830.332275, 20309.531860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27367.560852, 20059.011261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24553.110321, 20478.805908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28128.712616, 19962.500946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35190.532990, 19524.528641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27414.386000, 19382.490000, 1047.232030, 1047.232030, 0.000000, X, Y) && !ellipse(28632.318573, 19188.023590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30449.423279, 18420.590027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29956.519745, 18661.086563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22203.116013, 28997.196594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20787.542000, 29355.704000, 1396.416040, 1396.416040, 0.000000, X, Y) && !ellipse(23375.740234, 28390.031219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22966.410000, 28383.236200, 1298.480037, 1298.480037, 0.000000, X, Y) && !ellipse(21796.804932, 28650.022308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27600.640564, 27524.682831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23764.210846, 27390.428619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21791.097946, 27695.300323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25530.097382, 27453.613007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22847.973511, 27124.915070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27041.840000, 26390.164000, 1156.352033, 1156.352033, 0.000000, X, Y) && !ellipse(21373.415375, 26594.495972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23543.027120, 26534.771200, 815.216023, 815.216023, 0.000000, X, Y) && !ellipse(25347.471191, 26129.841949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26220.707672, 24398.441589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25928.002000, 24271.252000, 1131.736033, 1131.736033, 0.000000, X, Y) && !ellipse(30453.777527, 23408.280273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29144.680000, 22985.316400, 1301.768037, 1301.768037, 0.000000, X, Y) && !ellipse(30505.526703, 22931.285675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29849.463654, 22918.870758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28201.224121, 22492.844757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30873.696960, 22132.386032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20762.773239, 22322.240540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28196.380000, 21489.516000, 2345.920068, 2345.920068, 0.000000, X, Y) && !ellipse(22649.422455, 21615.496964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21638.189499, 21975.877365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26162.910339, 21258.536240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28595.615448, 20129.183685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28137.672000, 19132.814200, 1512.264044, 1512.264044, 0.000000, X, Y)
[Sat Jun 22 00:53:13 2013] Writing fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src52.gif
[Sat Jun 22 00:53:32 2013] ../../xmm0110010701/products/events/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src52_src.evt and ../../xmm0110010701/products/events/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src52_bgd.evt exist, delete to re-create
[Sat Jun 22 00:53:33 2013] Mean detx,y = (1446.67, 7186.98) 
[Sat Jun 22 00:53:33 2013] ../../xmm0110010701/products/images/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src52_src.img and ../../xmm0110010701/products/images/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src52_bgd.img exist, delete to re-create
[Sat Jun 22 00:53:33 2013] ../../xmm0110010701/products/spectra/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src52_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src52_bgd.pi exist, delete to re-create
[Sat Jun 22 00:53:33 2013] Setting source spectrum file to fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Sat Jun 22 00:53:33 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Sat Jun 22 00:53:33 2013] ../../xmm0110010701/products/lightcurves/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src52_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src52_bgd.lc exist, delete to re-create
[Sat Jun 22 04:10:32 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:10:32 2013] Total counts from fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src52_src_b10.pi.gz = 54221.00
[Sat Jun 22 04:10:32 2013] Total counts from fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src52_bgd.pi.gz = 69646.00
[Sat Jun 22 04:10:32 2013] Got source and background scale factors 13750040.000000, 180969601.000000
[Sat Jun 22 04:10:32 2013] User source parameters:
  Position = (349.1, 250.4) = 14 42 27.61 -62 42 42.4
  Extent = 18.1 (18.1-36.2)", rotation angle = 0
  Source aperture counts = 48929.3 +/- 233.9
  Background aperture counts = 5291.7
  Rate = 3 +/- 0.01

[Sat Jun 22 04:10:47 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:10:47 2013] Using photon index=1.80, rate=0.0727, arf fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src52.arf
[Sat Jun 22 04:10:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:10:47 2013] Updating source flux to 4.3e-13
[Sat Jun 22 04:14:22 2013] Flag c found in src. 52 procflags, skipping spectral fitting
[Sat Jun 22 04:14:57 2013] xmm0110010701/analysis//spectral/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src52_pl.csv not found, spectral fit skipped or did not complete