[Sat Jun 22 00:45:27 2013] Detection parameters:
  Position = (433.6, 269.9) = 14 41 34.24 -62 41 14.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 320.1 +/- 36.1
  Background counts = 424.0
  Rate = 0.02 +/- 0.002

[Sat Jun 22 00:45:39 2013] Off-axis axis estimate = 10.02'
[Sat Jun 22 00:47:45 2013] Using EEF radius (= 11.44 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:47:45 2013] Initial guess for spatial extent in simple fitting = 11.44"
[Sat Jun 22 00:47:45 2013] source mask rpix=2.6, npix_max = 39, mask sum = 40, frac = 1.021
[Sat Jun 22 00:47:45 2013] Giving source the simple spatial ID 47 for pass 0, mean size = 11.44"
[Sat Jun 22 00:47:48 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src47.ximg exists
[Sat Jun 22 00:47:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src47.csv
[Sat Jun 22 00:47:48 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src47_1.ximg exists
[Sat Jun 22 00:47:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src47.csv
[Sat Jun 22 00:47:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:47:52 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Sat Jun 22 00:47:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src47.csv
[Sat Jun 22 00:47:52 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Sat Jun 22 00:47:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src47.csv
[Sat Jun 22 00:47:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:50 2013] Warning, spatial fit 47 centroid is now closest to src. 17
[Sat Jun 22 00:48:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:48:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:48:50 2013] Assessing source extent using major
[Sat Jun 22 00:48:50 2013] Source does appear to be extended
[Sat Jun 22 00:48:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:48:50 2013] Source is confused with source 21
[Sat Jun 22 00:50:29 2013] Using EEF radius (= 11.44 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:29 2013] Initial guess for spatial extent in simple fitting = 11.44"
[Sat Jun 22 00:50:29 2013] source mask rpix=2.6, npix_max = 39, mask sum = 40, frac = 1.021
[Sat Jun 22 00:50:29 2013] Giving source the simple spatial ID 47 for pass 1, mean size = 11.44"
[Sat Jun 22 00:50:31 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src47.ximg exists
[Sat Jun 22 00:50:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src47.csv
[Sat Jun 22 00:50:31 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src47_1.ximg exists
[Sat Jun 22 00:50:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src47.csv
[Sat Jun 22 00:50:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:50:41 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Sat Jun 22 00:50:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src47.csv
[Sat Jun 22 00:50:41 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Sat Jun 22 00:50:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src47.csv
[Sat Jun 22 00:50:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:51:37 2013] Source 50 is offset by 6.460603 and 1.717653 pixels which is larger than
2 X fitted extent = 2.144193 x 2.144193, not incorporating fit results
[Sat Jun 22 00:51:37 2013] Source 50 is offset by 0.798994 and 2.056043 pixels which is larger than
2 X fitted extent = 1.101894 x 1.101894, not incorporating fit results
[Sat Jun 22 00:51:37 2013] Spatial fit model total counts = 6810.420000, observed total counts = 5604.000000
[Sat Jun 22 00:51:37 2013] Poor agreement between spatial fit and data for source 50
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 00:51:37 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:51:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:51:37 2013] Assessing source extent using major
[Sat Jun 22 00:51:37 2013] Source does appear to be extended
[Sat Jun 22 00:51:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:53:13 2013] XMMSAS src. selection expression = ellipse(37675.932465, 23430.295776, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 00:53:13 2013] Not overwriting source region fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src50_src.reg
[Sat Jun 22 00:53:13 2013] Extracting stamp from image fullrun_pn_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (396, 232) - (471, 307)
[Sat Jun 22 00:53:13 2013] XMMSAS bgd. selection expression = annulus(37675.932465, 23430.295776, 1087.500000, 2175.000000, X, Y) && !ellipse(30589.872000, 19523.320000, 10095.168290, 10095.168290, 0.000000, X, Y) && !ellipse(39671.148000, 23978.424000, 1936.720056, 1936.720056, 0.000000, X, Y) && !ellipse(34100.550000, 23187.100000, 2382.304069, 2382.304069, 0.000000, X, Y) && !ellipse(38941.200000, 23682.646000, 1908.600055, 1908.600055, 0.000000, X, Y) && !ellipse(40060.629333, 22629.623901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38428.516449, 22309.315857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39273.452972, 22401.936554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40251.573730, 21694.287613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38141.896000, 22434.876000, 1908.600055, 1908.600055, 0.000000, X, Y) && !ellipse(37270.817474, 21788.758865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35693.015200, 21768.601800, 1740.264050, 1244.456036, 355.672920, X, Y) && !ellipse(40276.111800, 24711.985800, 1096.240032, 1096.240032, 0.000000, X, Y) && !ellipse(40244.219299, 24150.886658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40363.602692, 23537.346558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34880.774000, 23577.414600, 1675.104048, 1016.864029, 23.769000, X, Y) && !ellipse(36448.002655, 23094.054901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36828.481628, 22400.019623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41470.698800, 25841.030000, 2057.376059, 1174.952034, 116.889400, X, Y)
[Sat Jun 22 00:53:13 2013] Writing fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src50.gif
[Sat Jun 22 00:53:32 2013] ../../xmm0110010701/products/events/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src50_src.evt and ../../xmm0110010701/products/events/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src50_bgd.evt exist, delete to re-create
[Sat Jun 22 00:53:32 2013] Mean detx,y = (9195.54, 7962.10) 
[Sat Jun 22 00:53:32 2013] ../../xmm0110010701/products/images/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src50_src.img and ../../xmm0110010701/products/images/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src50_bgd.img exist, delete to re-create
[Sat Jun 22 00:53:32 2013] ../../xmm0110010701/products/spectra/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src50_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src50_bgd.pi exist, delete to re-create
[Sat Jun 22 00:53:32 2013] Setting source spectrum file to fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Sat Jun 22 00:53:32 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Sat Jun 22 00:53:32 2013] ../../xmm0110010701/products/lightcurves/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src50_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src50_bgd.lc exist, delete to re-create
[Sat Jun 22 03:18:23 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 03:18:23 2013] rmf not generated due to insufficient counts
[Sat Jun 22 04:10:31 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:10:31 2013] Total counts from fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src50_src_b10.pi.gz = 4004.00
[Sat Jun 22 04:10:31 2013] Total counts from fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src50_bgd.pi.gz = 0.00
[Sat Jun 22 04:10:31 2013] Got source and background scale factors 1223964.000000, 0.000000
[Sat Jun 22 04:10:31 2013] Background scale factor is not positive, halting re-assessment of this source
[Sat Jun 22 04:10:47 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:10:47 2013] Using photon index=1.80, rate=0.0187, arf fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src50.arf
[Sat Jun 22 04:10:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:10:47 2013] Updating source flux to 1.9e-13
[Sat Jun 22 04:14:22 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 04:14:57 2013] xmm0110010701/analysis//spectral/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src50_pl.csv not found, spectral fit skipped or did not complete