[Sat Jun 22 00:45:26 2013] Detection parameters:
  Position = (475.7, 291.8) = 14 41 7.75 -62 39 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.6 +/- 23.9
  Background counts = 173.4
  Rate = 0.008 +/- 0.001

[Sat Jun 22 00:45:39 2013] Off-axis axis estimate = 12.86'
[Sat Jun 22 00:47:45 2013] Using EEF radius (= 12.86 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:47:45 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 22 00:47:45 2013] Initial guess for spatial extent in simple fitting = 12.86"
[Sat Jun 22 00:47:45 2013] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.026
[Sat Jun 22 00:47:45 2013] Giving source the simple spatial ID 44 for pass 0, mean size = 12.86"
[Sat Jun 22 00:47:48 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src44.ximg exists
[Sat Jun 22 00:47:48 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src44_1.ximg exists
[Sat Jun 22 00:47:48 2013] Fit fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src44 appears to have run properly
[Sat Jun 22 00:47:52 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Sat Jun 22 00:47:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src44.csv
[Sat Jun 22 00:47:52 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Sat Jun 22 00:47:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src44.csv
[Sat Jun 22 00:47:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:50 2013] Spatial fit model total counts = 2745.190000, observed total counts = 2660.000000
[Sat Jun 22 00:48:50 2013] Offset between fit and detection position for source 46 = 5.933949 pixels
[Sat Jun 22 00:48:50 2013] 2453.129000 total counts/ 1691.400000 bgd. counts: snr = 18.521550
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 5.933949 pixels
  Position = (477.2, 297.6) = 14 41 6.80 -62 39 14.8
  Extent = 25.7 (23.6-51.4)" x 14.7 (11.7-18.7)", rotation angle = 117 (102-129) degrees
  Source counts = 761.7 +/- 49.5
  Background counts = 1691.4
  Rate = 0.04 +/- 0.003
[Sat Jun 22 00:48:50 2013] Source 46 is offset by 1.377251 and 4.560046 pixels which is larger than
2 X fitted extent = 3.489062 x 3.489062, not incorporating fit results
[Sat Jun 22 00:48:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:48:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:48:50 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 00:48:50 2013] Source does appear to be extended
[Sat Jun 22 00:48:50 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.26
[Sat Jun 22 00:48:50 2013] Source is confused with source 27
[Sat Jun 22 00:48:50 2013] Source is confused with source 47
[Sat Jun 22 00:50:29 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:29 2013] Initial guess for spatial extent in simple fitting = 20.20"
[Sat Jun 22 00:50:29 2013] source mask rpix=4.6, npix_max = 105, mask sum = 95, frac = 0.898
[Sat Jun 22 00:50:29 2013] Giving source the simple spatial ID 44 for pass 1, mean size = 20.20"
[Sat Jun 22 00:50:31 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src44.ximg exists
[Sat Jun 22 00:50:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src44.csv
[Sat Jun 22 00:50:31 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src44_1.ximg exists
[Sat Jun 22 00:50:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src44.csv
[Sat Jun 22 00:50:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:50:41 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Sat Jun 22 00:50:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src44.csv
[Sat Jun 22 00:50:41 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Sat Jun 22 00:50:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src44.csv
[Sat Jun 22 00:50:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:51:37 2013] Warning, spatial fit 44 centroid is now closest to src. 27
[Sat Jun 22 00:51:37 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:51:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:51:37 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 00:51:37 2013] Source does appear to be extended
[Sat Jun 22 00:51:37 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.26
[Sat Jun 22 00:53:13 2013] XMMSAS src. selection expression = ellipse(41470.698800, 25841.030000, 1543.032044, 881.214025, 116.889400, X, Y)
[Sat Jun 22 00:53:13 2013] Not overwriting source region fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src46_src.reg
[Sat Jun 22 00:53:13 2013] Extracting stamp from image fullrun_pn_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (389, 209) - (566, 386)
[Sat Jun 22 00:53:13 2013] XMMSAS bgd. selection expression = annulus(41470.698800, 25841.030000, 2571.720074, 5143.440148, X, Y) && !ellipse(38767.377838, 20144.531082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39947.036560, 20317.835464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39441.192413, 20217.525803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30589.872000, 19523.320000, 10095.168290, 10095.168290, 0.000000, X, Y) && !ellipse(39671.148000, 23978.424000, 1936.720056, 1936.720056, 0.000000, X, Y) && !ellipse(34100.550000, 23187.100000, 2382.304069, 2382.304069, 0.000000, X, Y) && !ellipse(38941.200000, 23682.646000, 1908.600055, 1908.600055, 0.000000, X, Y) && !ellipse(40060.629333, 22629.623901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40769.816864, 22659.267303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38428.516449, 22309.315857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39273.452972, 22401.936554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40251.573730, 21694.287613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38141.896000, 22434.876000, 1908.600055, 1908.600055, 0.000000, X, Y) && !ellipse(37270.817474, 21788.758865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35693.015200, 21768.601800, 1740.264050, 1244.456036, 355.672920, X, Y) && !ellipse(40276.111800, 24711.985800, 1096.240032, 1096.240032, 0.000000, X, Y) && !ellipse(40244.219299, 24150.886658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40948.524231, 23695.198669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40363.602692, 23537.346558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34880.774000, 23577.414600, 1675.104048, 1016.864029, 23.769000, X, Y) && !ellipse(36448.002655, 23094.054901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36828.481628, 22400.019623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35967.028168, 20206.499466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41155.274017, 24560.193939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41125.285461, 24129.134003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37675.932465, 23430.295776, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 00:53:13 2013] Writing fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src46.gif
[Sat Jun 22 00:53:31 2013] ../../xmm0110010701/products/events/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src46_src.evt and ../../xmm0110010701/products/events/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src46_bgd.evt exist, delete to re-create
[Sat Jun 22 00:53:31 2013] Mean detx,y = (13168.77, 6832.73) 
[Sat Jun 22 00:53:31 2013] ../../xmm0110010701/products/images/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src46_src.img and ../../xmm0110010701/products/images/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src46_bgd.img exist, delete to re-create
[Sat Jun 22 00:53:31 2013] ../../xmm0110010701/products/spectra/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src46_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src46_bgd.pi exist, delete to re-create
[Sat Jun 22 00:53:31 2013] Setting source spectrum file to fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Sat Jun 22 00:53:31 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Sat Jun 22 00:53:31 2013] ../../xmm0110010701/products/lightcurves/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src46_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src46_bgd.lc exist, delete to re-create
[Sat Jun 22 04:10:30 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:10:30 2013] Total counts from fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src46_src_b10.pi.gz = 2451.00
[Sat Jun 22 04:10:30 2013] Total counts from fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src46_bgd.pi.gz = 6686.00
[Sat Jun 22 04:10:30 2013] Got source and background scale factors 2563990.000000, 10031513.000000
[Sat Jun 22 04:10:30 2013] User source parameters:
  Position = (477.2, 297.6) = 14 41 6.80 -62 39 14.8
  Extent = 25.7 (23.6-51.4)" x 14.7 (11.7-18.7)", rotation angle = 117 (102-129) degrees
  Source aperture counts = 742.1 +/- 50.5
  Background aperture counts = 1708.9
  Rate = 0.04 +/- 0.003

[Sat Jun 22 04:10:46 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:10:46 2013] Using photon index=1.80, rate=0.0446, arf fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src46.arf
[Sat Jun 22 04:10:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:10:47 2013] Updating source flux to 6.5e-13
[Sat Jun 22 04:14:22 2013] Flag b found in src. 46 procflags, skipping spectral fitting
[Sat Jun 22 04:14:22 2013] Flag c found in src. 46 procflags, skipping spectral fitting
[Sat Jun 22 04:14:57 2013] xmm0110010701/analysis//spectral/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src46_pl.csv not found, spectral fit skipped or did not complete