[Sat Jun 22 00:45:25 2013] Detection parameters:
  Position = (389.1, 245.0) = 14 42 2.34 -62 42 54.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 304.5 +/- 43.4
  Background counts = 621.0
  Rate = 0.02 +/- 0.003

[Sat Jun 22 00:45:39 2013] Off-axis axis estimate = 7.63'
[Sat Jun 22 00:47:45 2013] Using EEF radius (= 10.24 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:47:45 2013] Initial guess for spatial extent in simple fitting = 10.24"
[Sat Jun 22 00:47:45 2013] source mask rpix=2.4, npix_max = 32, mask sum = 25, frac = 0.767
[Sat Jun 22 00:47:45 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 10.24"
[Sat Jun 22 00:47:48 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src35.ximg exists
[Sat Jun 22 00:47:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src35.csv
[Sat Jun 22 00:47:48 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src35_1.ximg exists
[Sat Jun 22 00:47:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src35.csv
[Sat Jun 22 00:47:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:47:51 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Sat Jun 22 00:47:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src35.csv
[Sat Jun 22 00:47:51 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Sat Jun 22 00:47:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src35.csv
[Sat Jun 22 00:47:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:50 2013] Warning, spatial fit 35 centroid is now closest to src. 11
[Sat Jun 22 00:48:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:48:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:48:50 2013] Assessing source extent using major
[Sat Jun 22 00:48:50 2013] Source does appear to be extended
[Sat Jun 22 00:48:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:50:29 2013] Using EEF radius (= 10.24 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:29 2013] Initial guess for spatial extent in simple fitting = 10.24"
[Sat Jun 22 00:50:29 2013] source mask rpix=2.4, npix_max = 32, mask sum = 25, frac = 0.767
[Sat Jun 22 00:50:29 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 10.24"
[Sat Jun 22 00:50:31 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src35.ximg exists
[Sat Jun 22 00:50:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src35.csv
[Sat Jun 22 00:50:31 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src35_1.ximg exists
[Sat Jun 22 00:50:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src35.csv
[Sat Jun 22 00:50:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:50:40 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Sat Jun 22 00:50:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src35.csv
[Sat Jun 22 00:50:40 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Sat Jun 22 00:50:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src35.csv
[Sat Jun 22 00:50:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:51:37 2013] Warning, spatial fit 35 centroid is now closest to src. 11
[Sat Jun 22 00:51:37 2013] Source 37 is offset by 5.556032 and 2.090976 pixels which is larger than
2 X fitted extent = 2.780979 x 2.780979, not incorporating fit results
[Sat Jun 22 00:51:37 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:51:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:51:37 2013] Assessing source extent using major
[Sat Jun 22 00:51:37 2013] Source does appear to be extended
[Sat Jun 22 00:51:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:53:12 2013] XMMSAS src. selection expression = ellipse(33800.250793, 21269.644882, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 00:53:12 2013] Not overwriting source region fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src37_src.reg
[Sat Jun 22 00:53:12 2013] Extracting stamp from image fullrun_pn_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (352, 208) - (427, 283)
[Sat Jun 22 00:53:12 2013] XMMSAS bgd. selection expression = annulus(33800.250793, 21269.644882, 1087.500000, 2175.000000, X, Y) && !ellipse(34740.255951, 19131.191360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30589.872000, 19523.320000, 10095.168290, 10095.168290, 0.000000, X, Y) && !ellipse(31379.966000, 18530.680000, 1682.528048, 1682.528048, 0.000000, X, Y) && !ellipse(33007.286469, 22058.365143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34100.550000, 23187.100000, 2382.304069, 2382.304069, 0.000000, X, Y) && !ellipse(33965.714874, 22835.324951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35693.015200, 21768.601800, 1740.264050, 1244.456036, 355.672920, X, Y) && !ellipse(29945.792000, 20144.512000, 3052.992088, 3052.992088, 0.000000, X, Y) && !ellipse(34880.774000, 23577.414600, 1675.104048, 1016.864029, 23.769000, X, Y) && !ellipse(36448.002655, 23094.054901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32943.464874, 23078.376953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36828.481628, 22400.019623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31310.268738, 22889.872528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31923.782288, 21350.810455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35967.028168, 20206.499466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31008.278000, 19111.894000, 2242.576065, 2242.576065, 0.000000, X, Y) && !ellipse(31305.890594, 21880.375961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30326.430000, 21740.646000, 1447.368042, 1447.368042, 0.000000, X, Y) && !ellipse(33830.332275, 20309.531860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35190.532990, 19524.528641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30873.696960, 22132.386032, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 00:53:12 2013] Writing fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src37.gif
[Sat Jun 22 00:53:30 2013] ../../xmm0110010701/products/events/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src37_src.evt and ../../xmm0110010701/products/events/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src37_bgd.evt exist, delete to re-create
[Sat Jun 22 00:53:30 2013] Mean detx,y = (4662.64, 8527.58) 
[Sat Jun 22 00:53:30 2013] ../../xmm0110010701/products/images/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src37_src.img and ../../xmm0110010701/products/images/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src37_bgd.img exist, delete to re-create
[Sat Jun 22 00:53:30 2013] ../../xmm0110010701/products/spectra/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src37_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src37_bgd.pi exist, delete to re-create
[Sat Jun 22 00:53:30 2013] Setting source spectrum file to fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sat Jun 22 00:53:30 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sat Jun 22 00:53:30 2013] ../../xmm0110010701/products/lightcurves/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src37_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src37_bgd.lc exist, delete to re-create
[Sat Jun 22 02:54:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 02:54:31 2013] rmf not generated due to insufficient counts
[Sat Jun 22 04:10:27 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:10:27 2013] Total counts from fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 4411.00
[Sat Jun 22 04:10:27 2013] Total counts from fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src37_bgd.pi.gz = 0.00
[Sat Jun 22 04:10:27 2013] Got source and background scale factors 1040852.000000, 0.000000
[Sat Jun 22 04:10:27 2013] Background scale factor is not positive, halting re-assessment of this source
[Sat Jun 22 04:10:46 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:10:46 2013] Using photon index=1.80, rate=0.0177, arf fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src37.arf
[Sat Jun 22 04:10:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:10:46 2013] Updating source flux to 2.4e-13
[Sat Jun 22 04:14:22 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 04:14:57 2013] xmm0110010701/analysis//spectral/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete