[Sat Jun 22 00:45:23 2013] Detection parameters:
  Position = (429.0, 251.0) = 14 41 37.12 -62 42 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 774.0 +/- 44.0
  Background counts = 429.1
  Rate = 0.05 +/- 0.003

[Sat Jun 22 00:45:39 2013] Off-axis axis estimate = 10.07'
[Sat Jun 22 00:47:45 2013] Using EEF radius (= 11.46 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:47:45 2013] Initial guess for spatial extent in simple fitting = 11.46"
[Sat Jun 22 00:47:45 2013] source mask rpix=2.6, npix_max = 39, mask sum = 35, frac = 0.890
[Sat Jun 22 00:47:45 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 11.46"
[Sat Jun 22 00:47:47 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src21.ximg exists
[Sat Jun 22 00:47:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src21.csv
[Sat Jun 22 00:47:47 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src21_1.ximg exists
[Sat Jun 22 00:47:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src21.csv
[Sat Jun 22 00:47:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:47:51 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sat Jun 22 00:47:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sat Jun 22 00:47:51 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sat Jun 22 00:47:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sat Jun 22 00:47:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:49 2013] Source 22 is offset by -5.436144 and 7.396792 pixels which is larger than
2 X fitted extent = 1.388271 x 1.388271, not incorporating fit results
[Sat Jun 22 00:48:49 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 12.405959 pixels away
[Sat Jun 22 00:48:49 2013] Spatial fit model total counts = 9311.260000, observed total counts = 5978.000000
[Sat Jun 22 00:48:49 2013] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 00:48:49 2013] Source 22 is offset by -5.346466 and 2.307113 pixels which is larger than
2 X fitted extent = 1.288018 x 1.288018, not incorporating fit results
[Sat Jun 22 00:48:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:48:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:48:50 2013] Assessing source extent using major
[Sat Jun 22 00:48:50 2013] Source does appear to be extended
[Sat Jun 22 00:48:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:48:50 2013] Source is confused with source 21
[Sat Jun 22 00:50:29 2013] Using EEF radius (= 11.46 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:29 2013] Initial guess for spatial extent in simple fitting = 11.46"
[Sat Jun 22 00:50:29 2013] source mask rpix=2.6, npix_max = 39, mask sum = 35, frac = 0.890
[Sat Jun 22 00:50:29 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 11.46"
[Sat Jun 22 00:50:30 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src21.ximg exists
[Sat Jun 22 00:50:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src21.csv
[Sat Jun 22 00:50:30 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src21_1.ximg exists
[Sat Jun 22 00:50:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src21.csv
[Sat Jun 22 00:50:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:50:36 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sat Jun 22 00:50:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sat Jun 22 00:50:38 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sat Jun 22 00:50:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sat Jun 22 00:50:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:51:37 2013] Source 22 is offset by -8.156420 and 0.631665 pixels which is larger than
2 X fitted extent = 1.681729 x 1.681729, not incorporating fit results
[Sat Jun 22 00:51:37 2013] Spatial fit model total counts = 32595.100000, observed total counts = 27885.000000
[Sat Jun 22 00:51:37 2013] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 00:51:37 2013] Warning, spatial fit 21 centroid is now closest to src. 17
[Sat Jun 22 00:51:37 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:51:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:51:37 2013] Assessing source extent using major
[Sat Jun 22 00:51:37 2013] Source does appear to be extended
[Sat Jun 22 00:51:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:53:11 2013] XMMSAS src. selection expression = ellipse(37270.817474, 21788.758865, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 00:53:11 2013] Not overwriting source region fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src22_src.reg
[Sat Jun 22 00:53:11 2013] Extracting stamp from image fullrun_pn_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (391, 214) - (466, 289)
[Sat Jun 22 00:53:11 2013] XMMSAS bgd. selection expression = annulus(37270.817474, 21788.758865, 1087.500000, 2175.000000, X, Y) && !ellipse(38767.377838, 20144.531082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39947.036560, 20317.835464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37969.599945, 19707.997803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34740.255951, 19131.191360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37162.463074, 19597.372025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39441.192413, 20217.525803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30589.872000, 19523.320000, 10095.168290, 10095.168290, 0.000000, X, Y) && !ellipse(39671.148000, 23978.424000, 1936.720056, 1936.720056, 0.000000, X, Y) && !ellipse(34100.550000, 23187.100000, 2382.304069, 2382.304069, 0.000000, X, Y) && !ellipse(38941.200000, 23682.646000, 1908.600055, 1908.600055, 0.000000, X, Y) && !ellipse(40060.629333, 22629.623901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38428.516449, 22309.315857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39273.452972, 22401.936554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40251.573730, 21694.287613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38141.896000, 22434.876000, 1908.600055, 1908.600055, 0.000000, X, Y) && !ellipse(35693.015200, 21768.601800, 1740.264050, 1244.456036, 355.672920, X, Y) && !ellipse(40276.111800, 24711.985800, 1096.240032, 1096.240032, 0.000000, X, Y) && !ellipse(40244.219299, 24150.886658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34880.774000, 23577.414600, 1675.104048, 1016.864029, 23.769000, X, Y) && !ellipse(36448.002655, 23094.054901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36828.481628, 22400.019623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35967.028168, 20206.499466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38464.709808, 18756.217590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41470.698800, 25841.030000, 2057.376059, 1174.952034, 116.889400, X, Y) && !ellipse(37675.932465, 23430.295776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35190.532990, 19524.528641, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 00:53:11 2013] Writing fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src22.gif
[Sat Jun 22 00:53:27 2013] ../../xmm0110010701/products/events/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src22_src.evt and ../../xmm0110010701/products/events/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src22_bgd.evt exist, delete to re-create
[Sat Jun 22 00:53:27 2013] Mean detx,y = (8141.16, 9260.56) 
[Sat Jun 22 00:53:27 2013] ../../xmm0110010701/products/images/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src22_src.img and ../../xmm0110010701/products/images/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src22_bgd.img exist, delete to re-create
[Sat Jun 22 00:53:27 2013] ../../xmm0110010701/products/spectra/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src22_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src22_bgd.pi exist, delete to re-create
[Sat Jun 22 00:53:27 2013] Setting source spectrum file to fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat Jun 22 00:53:27 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Sat Jun 22 00:53:27 2013] ../../xmm0110010701/products/lightcurves/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src22_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src22_bgd.lc exist, delete to re-create
[Sat Jun 22 02:29:32 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 02:29:32 2013] rmf not generated due to insufficient counts
[Sat Jun 22 04:10:21 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:10:21 2013] Total counts from fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 4039.00
[Sat Jun 22 04:10:21 2013] Total counts from fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src22_bgd.pi.gz = 0.00
[Sat Jun 22 04:10:22 2013] Got source and background scale factors 923462.000000, 0.000000
[Sat Jun 22 04:10:22 2013] Background scale factor is not positive, halting re-assessment of this source
[Sat Jun 22 04:10:46 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:10:46 2013] Using photon index=1.80, rate=0.0451, arf fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src22.arf
[Sat Jun 22 04:10:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:10:46 2013] Updating source flux to 5.5e-13
[Sat Jun 22 04:14:22 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 04:14:57 2013] xmm0110010701/analysis//spectral/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete