[Sat Jun 22 00:45:22 2013] Detection parameters:
  Position = (461.0, 260.7) = 14 41 16.88 -62 41 55.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 711.6 +/- 39.4
  Background counts = 252.2
  Rate = 0.04 +/- 0.002

[Sat Jun 22 00:45:39 2013] Off-axis axis estimate = 12.10'
[Sat Jun 22 00:47:45 2013] Using EEF radius (= 12.48 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:47:45 2013] Initial guess for spatial extent in simple fitting = 12.48"
[Sat Jun 22 00:47:45 2013] source mask rpix=2.9, npix_max = 45, mask sum = 40, frac = 0.881
[Sat Jun 22 00:47:45 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 12.48"
[Sat Jun 22 00:47:47 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src14.ximg exists
[Sat Jun 22 00:47:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src14.csv
[Sat Jun 22 00:47:47 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src14_1.ximg exists
[Sat Jun 22 00:47:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src14.csv
[Sat Jun 22 00:47:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:47:51 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sat Jun 22 00:47:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sat Jun 22 00:47:51 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sat Jun 22 00:47:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sat Jun 22 00:47:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:49 2013] Warning, spatial fit 14 centroid is now closest to src. 14
[Sat Jun 22 00:48:49 2013] Source 15 is offset by -1.446697 and 1.157725 pixels which is larger than
2 X fitted extent = 1.401159 x 1.401159, not incorporating fit results
[Sat Jun 22 00:48:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:48:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:48:50 2013] Assessing source extent using major
[Sat Jun 22 00:48:50 2013] Source does appear to be extended
[Sat Jun 22 00:48:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:48:50 2013] Source is confused with source 12
[Sat Jun 22 00:50:29 2013] Using EEF radius (= 12.48 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:29 2013] Initial guess for spatial extent in simple fitting = 12.48"
[Sat Jun 22 00:50:29 2013] source mask rpix=2.9, npix_max = 45, mask sum = 40, frac = 0.881
[Sat Jun 22 00:50:29 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 12.48"
[Sat Jun 22 00:50:30 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src14.ximg exists
[Sat Jun 22 00:50:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src14.csv
[Sat Jun 22 00:50:30 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src14_1.ximg exists
[Sat Jun 22 00:50:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src14.csv
[Sat Jun 22 00:50:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:50:35 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sat Jun 22 00:50:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sat Jun 22 00:50:35 2013] fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sat Jun 22 00:50:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sat Jun 22 00:50:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:51:37 2013] Spatial fit model total counts = 6481.800000, observed total counts = 5571.000000
[Sat Jun 22 00:51:37 2013] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 00:51:37 2013] Source 15 is offset by -1.540467 and 1.156716 pixels which is larger than
2 X fitted extent = 1.420014 x 1.420014, not incorporating fit results
[Sat Jun 22 00:51:37 2013] Spatial fit model total counts = 6239.020000, observed total counts = 5095.000000
[Sat Jun 22 00:51:37 2013] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 00:51:37 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:51:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:51:37 2013] Assessing source extent using major
[Sat Jun 22 00:51:37 2013] Source does appear to be extended
[Sat Jun 22 00:51:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:53:11 2013] XMMSAS src. selection expression = ellipse(40060.629333, 22629.623901, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 00:53:11 2013] Not overwriting source region fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src15_src.reg
[Sat Jun 22 00:53:11 2013] Extracting stamp from image fullrun_pn_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (424, 223) - (499, 298)
[Sat Jun 22 00:53:11 2013] XMMSAS bgd. selection expression = annulus(40060.629333, 22629.623901, 1087.500000, 2175.000000, X, Y) && !ellipse(38767.377838, 20144.531082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39947.036560, 20317.835464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37969.599945, 19707.997803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37162.463074, 19597.372025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39441.192413, 20217.525803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30589.872000, 19523.320000, 10095.168290, 10095.168290, 0.000000, X, Y) && !ellipse(39671.148000, 23978.424000, 1936.720056, 1936.720056, 0.000000, X, Y) && !ellipse(38941.200000, 23682.646000, 1908.600055, 1908.600055, 0.000000, X, Y) && !ellipse(40769.816864, 22659.267303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38428.516449, 22309.315857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39273.452972, 22401.936554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40251.573730, 21694.287613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38141.896000, 22434.876000, 1908.600055, 1908.600055, 0.000000, X, Y) && !ellipse(37270.817474, 21788.758865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40276.111800, 24711.985800, 1096.240032, 1096.240032, 0.000000, X, Y) && !ellipse(40244.219299, 24150.886658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40948.524231, 23695.198669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40363.602692, 23537.346558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41470.698800, 25841.030000, 2057.376059, 1174.952034, 116.889400, X, Y) && !ellipse(41155.274017, 24560.193939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41125.285461, 24129.134003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37675.932465, 23430.295776, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 00:53:11 2013] Writing fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src15.gif
[Sat Jun 22 00:53:23 2013] ../../xmm0110010701/products/events/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src15_src.evt and ../../xmm0110010701/products/events/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src15_bgd.evt exist, delete to re-create
[Sat Jun 22 00:53:23 2013] Mean detx,y = (10956.11, 9464.41) 
[Sat Jun 22 00:53:23 2013] ../../xmm0110010701/products/images/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src15_src.img and ../../xmm0110010701/products/images/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src15_bgd.img exist, delete to re-create
[Sat Jun 22 00:53:23 2013] ../../xmm0110010701/products/spectra/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src15_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src15_bgd.pi exist, delete to re-create
[Sat Jun 22 00:53:23 2013] Setting source spectrum file to fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat Jun 22 00:53:23 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sat Jun 22 00:53:23 2013] ../../xmm0110010701/products/lightcurves/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src15_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src15_bgd.lc exist, delete to re-create
[Sat Jun 22 02:22:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 02:22:10 2013] rmf not generated due to insufficient counts
[Sat Jun 22 04:10:17 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:10:17 2013] Total counts from fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 3346.00
[Sat Jun 22 04:10:17 2013] Total counts from fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src15_bgd.pi.gz = 0.00
[Sat Jun 22 04:10:17 2013] Got source and background scale factors 1066520.000000, 0.000000
[Sat Jun 22 04:10:17 2013] Background scale factor is not positive, halting re-assessment of this source
[Sat Jun 22 04:10:45 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:10:45 2013] Using photon index=1.80, rate=0.0415, arf fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src15.arf
[Sat Jun 22 04:10:45 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:10:45 2013] Updating source flux to 5.9e-13
[Sat Jun 22 04:14:22 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 04:14:57 2013] xmm0110010701/analysis//spectral/fullrun_pn_xmm0110010701_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete