[Sat Jun 22 00:46:03 2013] Detection parameters:
  Position = (330.4, 220.4) = 14 42 39.41 -62 44 54.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.6 +/- 17.9
  Background counts = 103.1
  Rate = 0.007 +/- 0.002

[Sat Jun 22 00:46:06 2013] Off-axis axis estimate = 6.12'
[Sat Jun 22 00:48:03 2013] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:48:03 2013] Initial guess for spatial extent in simple fitting = 9.49"
[Sat Jun 22 00:48:03 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.870
[Sat Jun 22 00:48:03 2013] Giving source the simple spatial ID 81 for pass 0, mean size = 9.49"
[Sat Jun 22 00:48:08 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src81.ximg exists
[Sat Jun 22 00:48:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src81.csv
[Sat Jun 22 00:48:08 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src81_1.ximg exists
[Sat Jun 22 00:48:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src81.csv
[Sat Jun 22 00:48:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:12 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Sat Jun 22 00:48:12 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Sat Jun 22 00:48:12 2013] Fit fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src81 appears to have run properly
[Sat Jun 22 00:49:54 2013] Warning, spatial fit 81 centroid is now closest to src. 133
[Sat Jun 22 00:49:54 2013] Spatial fit model total counts = 1273.940000, observed total counts = 1276.000000
[Sat Jun 22 00:49:54 2013] Offset between fit and detection position for source 99 = 1.673823 pixels
[Sat Jun 22 00:49:54 2013] Warning, changing simple spatial fit ID from 81 to 87
[Sat Jun 22 00:49:54 2013] 1271.178000 total counts/ 872.454000 bgd. counts: snr = 13.498985
Spatial fit parameters:
  Offset between fit and detection position for source 99 = 1.673823 pixels
  Position = (328.9, 221.0) = 14 42 40.40 -62 44 50.7
  Extent = 18.7 (18.7-37.5)", rotation angle = 0
  Source counts = 398.7 +/- 35.7
  Background counts = 872.5
  Rate = 0.02 +/- 0.002
[Sat Jun 22 00:49:54 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:49:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:49:54 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 00:49:54 2013] Source does appear to be extended
[Sat Jun 22 00:49:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:49:54 2013] Source is confused with source 79
[Sat Jun 22 00:50:55 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:55 2013] Initial guess for spatial extent in simple fitting = 18.75"
[Sat Jun 22 00:50:55 2013] source mask rpix=4.3, npix_max = 92, mask sum = 100, frac = 1.081
[Sat Jun 22 00:50:55 2013] Giving source the simple spatial ID 77 for pass 1, mean size = 18.75"
[Sat Jun 22 00:50:59 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src77.ximg exists
[Sat Jun 22 00:50:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src77.csv
[Sat Jun 22 00:50:59 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src77_1.ximg exists
[Sat Jun 22 00:50:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src77.csv
[Sat Jun 22 00:50:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:51:03 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Sat Jun 22 00:51:03 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Sat Jun 22 00:51:03 2013] Fit fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src77 appears to have run properly
[Sat Jun 22 00:52:31 2013] Spatial fit model total counts = 2023.900000, observed total counts = 1696.000000
[Sat Jun 22 00:52:31 2013] Poor agreement between spatial fit and data for source 99
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 00:52:31 2013] Warning, spatial fit 77 centroid is now closest to src. 76
[Sat Jun 22 00:52:31 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:52:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:52:31 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 00:52:31 2013] Source does appear to be extended
[Sat Jun 22 00:52:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 04:09:00 2013] XMMSAS src. selection expression = ellipse(28564.498000, 19178.744800, 1124.904032, 1124.904032, 0.000000, X, Y)
[Sat Jun 22 04:09:00 2013] Not overwriting source region fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src99_src.reg
[Sat Jun 22 04:09:00 2013] Extracting stamp from image fullrun_mos2_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (264, 156) - (394, 286)
[Sat Jun 22 04:09:00 2013] XMMSAS bgd. selection expression = annulus(28564.498000, 19178.744800, 1874.840054, 3749.680108, X, Y) && !ellipse(31076.646000, 19551.482000, 1536.832044, 1536.832044, 0.000000, X, Y) && !ellipse(33200.426000, 17527.448000, 2533.024073, 2533.024073, 0.000000, X, Y) && !ellipse(32849.173568, 17746.308111, 1602.792046, 930.228580, 168.755150, X, Y) && !ellipse(33134.261200, 22215.270000, 1971.752057, 1971.752057, 0.000000, X, Y) && !ellipse(33559.304000, 17728.256000, 1794.192052, 1794.192052, 0.000000, X, Y) && !ellipse(32868.752135, 22030.452307, 1579.456045, 1579.456045, 334.533500, X, Y) && !ellipse(31785.832275, 18131.855591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30660.139679, 19947.907578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30157.476000, 20484.472000, 1536.832044, 1536.832044, 0.000000, X, Y) && !ellipse(29317.055939, 20979.987823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28835.492035, 20883.948776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31729.861603, 21815.321106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30513.292400, 21623.242000, 1089.056031, 1089.056031, 0.000000, X, Y) && !ellipse(33136.620000, 21204.689000, 1383.776040, 1383.776040, 0.000000, X, Y) && !ellipse(30918.699707, 20958.815292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32429.469788, 23505.945526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32548.529266, 20799.335648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31531.812347, 21203.967422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32005.129730, 21280.843796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26335.381000, 19513.154000, 1448.680042, 1448.680042, 0.000000, X, Y) && !ellipse(32004.322601, 23342.430237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29539.242065, 21389.155716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29386.848694, 19079.403687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33637.466000, 20060.424600, 1605.808046, 1605.808046, 0.000000, X, Y) && !ellipse(25025.456000, 20890.844000, 1708.760049, 1708.760049, 353.990000, X, Y) && !ellipse(29431.080000, 20436.084000, 872.192025, 872.192025, 0.000000, X, Y) && !ellipse(24016.252000, 20991.632000, 2770.096080, 2770.096080, 0.000000, X, Y) && !ellipse(24457.399170, 20494.944504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29924.424000, 23049.397600, 1413.344041, 1413.344041, 0.000000, X, Y) && !ellipse(28242.922000, 19110.665600, 1517.944044, 1517.944044, 0.000000, X, Y) && !ellipse(25449.085600, 23861.966300, 1174.736034, 1174.736034, 0.000000, X, Y)
[Sat Jun 22 04:09:00 2013] Writing fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src99.gif
[Sat Jun 22 04:09:07 2013] ../../xmm0110010701/products/events/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src99_src.evt and ../../xmm0110010701/products/events/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src99_bgd.evt exist, delete to re-create
[Sat Jun 22 04:09:07 2013] Mean detx,y = (867.86, -8774.34) 
[Sat Jun 22 04:09:07 2013] ../../xmm0110010701/products/images/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src99_src.img and ../../xmm0110010701/products/images/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src99_bgd.img exist, delete to re-create
[Sat Jun 22 04:09:07 2013] ../../xmm0110010701/products/spectra/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src99_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src99_bgd.pi exist, delete to re-create
[Sat Jun 22 04:09:07 2013] Setting source spectrum file to fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src99_src_b10.pi.gz
[Sat Jun 22 04:09:07 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src99_bgd.pi.gz
[Sat Jun 22 04:09:07 2013] ../../xmm0110010701/products/lightcurves/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src99_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src99_bgd.lc exist, delete to re-create
[Sat Jun 22 04:09:33 2013] fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src99.rmf exists, delete to re-create
[Sat Jun 22 04:09:33 2013] fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src99.arf exists, delete to re-create
[Sat Jun 22 04:11:36 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:11:36 2013] Total counts from fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src99_src_b10.pi.gz = 2528.00
[Sat Jun 22 04:11:36 2013] Total counts from fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src99_bgd.pi.gz = 3828.00
[Sat Jun 22 04:11:36 2013] Got source and background scale factors 3669385.000000, 13619521.000000
[Sat Jun 22 04:11:36 2013] User source parameters:
  Position = (328.9, 221.0) = 14 42 40.40 -62 44 50.7
  Extent = 18.7 (18.7-37.5)", rotation angle = 0
  Source aperture counts = 1496.7 +/- 51.3
  Background aperture counts = 1031.3
  Rate = 0.09 +/- 0.003

[Sat Jun 22 04:11:44 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:11:44 2013] Using photon index=1.80, rate=0.023, arf fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src99.arf
[Sat Jun 22 04:11:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:11:44 2013] Updating source flux to 4.6e-13
[Sat Jun 22 04:13:00 2013] Flag p found in src. 99 procflags, skipping spectral fitting
[Sat Jun 22 04:13:00 2013] Flag c found in src. 99 procflags, skipping spectral fitting
[Sat Jun 22 04:14:22 2013] xmm0110010701/analysis//spectral/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src99_pl.csv not found, spectral fit skipped or did not complete