[Sat Jun 22 00:46:02 2013] Detection parameters:
  Position = (289.5, 237.7) = 14 43 5.36 -62 43 45.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.9 +/- 14.1
  Background counts = 52.6
  Rate = 0.009 +/- 0.001

[Sat Jun 22 00:46:06 2013] Off-axis axis estimate = 4.45'
[Sat Jun 22 00:48:03 2013] Using EEF radius (= 8.66 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:48:03 2013] Initial guess for spatial extent in simple fitting = 8.66"
[Sat Jun 22 00:48:03 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.807
[Sat Jun 22 00:48:03 2013] Giving source the simple spatial ID 68 for pass 0, mean size = 8.66"
[Sat Jun 22 00:48:07 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src68.ximg exists
[Sat Jun 22 00:48:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src68.csv
[Sat Jun 22 00:48:07 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src68_1.ximg exists
[Sat Jun 22 00:48:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src68.csv
[Sat Jun 22 00:48:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:12 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Sat Jun 22 00:48:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src68.csv
[Sat Jun 22 00:48:12 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Sat Jun 22 00:48:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src68.csv
[Sat Jun 22 00:48:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:49:54 2013] Source 94 is offset by 0.462138 and 1.410909 pixels which is larger than
2 X fitted extent = 7.958989 x 0.994874, not incorporating fit results
[Sat Jun 22 00:49:54 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:49:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:49:54 2013] Assessing source extent using major
[Sat Jun 22 00:49:54 2013] Source does appear to be extended
[Sat Jun 22 00:49:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:50:55 2013] Using EEF radius (= 8.66 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:55 2013] Initial guess for spatial extent in simple fitting = 8.66"
[Sat Jun 22 00:50:55 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.807
[Sat Jun 22 00:50:55 2013] Giving source the simple spatial ID 64 for pass 1, mean size = 8.66"
[Sat Jun 22 00:50:59 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src64.ximg exists
[Sat Jun 22 00:50:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src64.csv
[Sat Jun 22 00:50:59 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src64_1.ximg exists
[Sat Jun 22 00:50:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src64.csv
[Sat Jun 22 00:50:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:51:03 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Sat Jun 22 00:51:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src64.csv
[Sat Jun 22 00:51:03 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Sat Jun 22 00:51:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src64.csv
[Sat Jun 22 00:51:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:52:31 2013] Warning: source 64 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 94 at 18.142011 pixels away
[Sat Jun 22 00:52:31 2013] Spatial fit model total counts = 748.030000, observed total counts = 731.000000
[Sat Jun 22 00:52:31 2013] Offset between fit and detection position for source 94 = 3.265107 pixels
[Sat Jun 22 00:52:31 2013] Warning, changing simple spatial fit ID from 64 to 76
Spatial fit parameters:
  Offset between fit and detection position for source 94 = 3.265107 pixels
  Position = (288.2, 240.7) = 14 43 6.15 -62 43 25.1
  Extent = 21.4" x 21.4", rotation angle = 354
  Source counts = 544.1 +/- 23.3
  Background counts = 0.0
  Rate = 0.03 +/- 0.001
[Sat Jun 22 00:52:31 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:52:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:52:31 2013] Assessing source extent using major
[Sat Jun 22 00:52:31 2013] Source does appear to be extended
[Sat Jun 22 00:52:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:52:31 2013] Source is confused with source 95
[Sat Jun 22 00:52:31 2013] Source is confused with source 96
[Sat Jun 22 04:09:00 2013] XMMSAS src. selection expression = ellipse(25025.456000, 20890.844000, 1281.570037, 1281.570037, 353.990000, X, Y)
[Sat Jun 22 04:09:00 2013] Not overwriting source region fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src94_src.reg
[Sat Jun 22 04:09:00 2013] Extracting stamp from image fullrun_mos2_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (215, 167) - (362, 314)
[Sat Jun 22 04:09:00 2013] XMMSAS bgd. selection expression = annulus(25025.456000, 20890.844000, 2135.950061, 4271.900123, X, Y) && !ellipse(30157.476000, 20484.472000, 1536.832044, 1536.832044, 0.000000, X, Y) && !ellipse(29317.055939, 20979.987823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28835.492035, 20883.948776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26335.381000, 19513.154000, 1448.680042, 1448.680042, 0.000000, X, Y) && !ellipse(29539.242065, 21389.155716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29386.848694, 19079.403687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29431.080000, 20436.084000, 872.192025, 872.192025, 0.000000, X, Y) && !ellipse(23134.888000, 21692.135200, 1365.264039, 1365.264039, 0.000000, X, Y) && !ellipse(24016.252000, 20991.632000, 2770.096080, 2770.096080, 0.000000, X, Y) && !ellipse(24457.399170, 20494.944504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28564.498000, 19178.744800, 1499.872043, 1499.872043, 0.000000, X, Y) && !ellipse(29924.424000, 23049.397600, 1413.344041, 1413.344041, 0.000000, X, Y) && !ellipse(25190.384000, 25920.328000, 1088.128031, 1088.128031, 0.000000, X, Y) && !ellipse(28242.922000, 19110.665600, 1517.944044, 1517.944044, 0.000000, X, Y) && !ellipse(25953.405160, 25875.003200, 1033.256030, 1033.256030, 0.000000, X, Y) && !ellipse(25449.085600, 23861.966300, 1174.736034, 1174.736034, 0.000000, X, Y) && !ellipse(23336.832000, 21342.594000, 1385.048040, 1385.048040, 0.000000, X, Y)
[Sat Jun 22 04:09:00 2013] Writing fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src94.gif
[Sat Jun 22 04:09:07 2013] ../../xmm0110010701/products/events/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src94_src.evt and ../../xmm0110010701/products/events/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src94_bgd.evt exist, delete to re-create
[Sat Jun 22 04:09:07 2013] Mean detx,y = (3704.31, -5985.34) 
[Sat Jun 22 04:09:07 2013] ../../xmm0110010701/products/images/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src94_src.img and ../../xmm0110010701/products/images/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src94_bgd.img exist, delete to re-create
[Sat Jun 22 04:09:07 2013] ../../xmm0110010701/products/spectra/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src94_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src94_bgd.pi exist, delete to re-create
[Sat Jun 22 04:09:07 2013] Setting source spectrum file to fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src94_src_b10.pi.gz
[Sat Jun 22 04:09:07 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src94_bgd.pi.gz
[Sat Jun 22 04:09:07 2013] ../../xmm0110010701/products/lightcurves/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src94_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src94_bgd.lc exist, delete to re-create
[Sat Jun 22 04:09:33 2013] fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src94.rmf exists, delete to re-create
[Sat Jun 22 04:09:33 2013] fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src94.arf exists, delete to re-create
[Sat Jun 22 04:11:32 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:11:32 2013] Total counts from fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src94_src_b10.pi.gz = 2194.00
[Sat Jun 22 04:11:33 2013] Total counts from fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src94_bgd.pi.gz = 6240.00
[Sat Jun 22 04:11:33 2013] Got source and background scale factors 4535784.000000, 19064919.000000
[Sat Jun 22 04:11:33 2013] User source parameters:
  Position = (288.2, 240.7) = 14 43 6.15 -62 43 25.1
  Extent = 21.4" x 21.4", rotation angle = 354
  Source aperture counts = 709.4 +/- 47.8
  Background aperture counts = 1484.6
  Rate = 0.04 +/- 0.003

[Sat Jun 22 04:11:43 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:11:43 2013] Using photon index=1.80, rate=0.0313, arf fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src94.arf
[Sat Jun 22 04:11:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:11:43 2013] Updating source flux to 5.8e-13
[Sat Jun 22 04:13:00 2013] Flag b found in src. 94 procflags, skipping spectral fitting
[Sat Jun 22 04:13:00 2013] Flag c found in src. 94 procflags, skipping spectral fitting
[Sat Jun 22 04:14:22 2013] xmm0110010701/analysis//spectral/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src94_pl.csv not found, spectral fit skipped or did not complete