[Sat Jun 22 00:46:02 2013] Detection parameters:
  Position = (269.9, 247.9) = 14 43 17.76 -62 42 53.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.4 +/- 16.5
  Background counts = 41.2
  Rate = 0.008 +/- 0.001

[Sat Jun 22 00:46:06 2013] Off-axis axis estimate = 4.21'
[Sat Jun 22 00:48:03 2013] Using EEF radius (= 8.53 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:48:03 2013] Initial guess for spatial extent in simple fitting = 8.53"
[Sat Jun 22 00:48:03 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.031
[Sat Jun 22 00:48:03 2013] Giving source the simple spatial ID 73 for pass 0, mean size = 8.53"
[Sat Jun 22 00:48:07 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src73.ximg exists
[Sat Jun 22 00:48:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src73.csv
[Sat Jun 22 00:48:07 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src73_1.ximg exists
[Sat Jun 22 00:48:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src73.csv
[Sat Jun 22 00:48:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:12 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Sat Jun 22 00:48:12 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Sat Jun 22 00:48:12 2013] Fit fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Sat Jun 22 00:49:54 2013] Spatial fit model total counts = 787.642000, observed total counts = 789.000000
[Sat Jun 22 00:49:54 2013] Offset between fit and detection position for source 93 = 3.919766 pixels
[Sat Jun 22 00:49:54 2013] 789.041000 total counts/ 570.812000 bgd. counts: snr = 9.134103
Spatial fit parameters:
  Offset between fit and detection position for source 93 = 3.919766 pixels
  Position = (266.5, 249.9) = 14 43 19.90 -62 42 45.0
  Extent = 17.1 (17.0-34.1)", rotation angle = 0
  Source counts = 218.2 +/- 28.1
  Background counts = 570.8
  Rate = 0.01 +/- 0.002
[Sat Jun 22 00:49:54 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:49:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:49:54 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 00:49:54 2013] Source does appear to be extended
[Sat Jun 22 00:49:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:49:54 2013] Source is confused with source 131
[Sat Jun 22 00:50:55 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:55 2013] Initial guess for spatial extent in simple fitting = 17.07"
[Sat Jun 22 00:50:55 2013] source mask rpix=3.9, npix_max = 78, mask sum = 81, frac = 1.035
[Sat Jun 22 00:50:55 2013] Giving source the simple spatial ID 69 for pass 1, mean size = 17.07"
[Sat Jun 22 00:50:59 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src69.ximg exists
[Sat Jun 22 00:50:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src69.csv
[Sat Jun 22 00:50:59 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src69_1.ximg exists
[Sat Jun 22 00:50:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src69.csv
[Sat Jun 22 00:50:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:51:03 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Sat Jun 22 00:51:03 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Sat Jun 22 00:51:03 2013] Fit fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src69 appears to have run properly
[Sat Jun 22 00:52:31 2013] Warning, spatial fit 69 centroid is now closest to src. 95
[Sat Jun 22 00:52:31 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:52:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:52:31 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 00:52:31 2013] Source does appear to be extended
[Sat Jun 22 00:52:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 04:09:00 2013] XMMSAS src. selection expression = ellipse(23134.888000, 21692.135200, 1023.948029, 1023.948029, 0.000000, X, Y)
[Sat Jun 22 04:09:00 2013] Not overwriting source region fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src93_src.reg
[Sat Jun 22 04:09:00 2013] Extracting stamp from image fullrun_mos2_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (208, 191) - (325, 309)
[Sat Jun 22 04:09:00 2013] XMMSAS bgd. selection expression = annulus(23134.888000, 21692.135200, 1706.580049, 3413.160098, X, Y) && !ellipse(26335.381000, 19513.154000, 1448.680042, 1448.680042, 0.000000, X, Y) && !ellipse(25025.456000, 20890.844000, 1708.760049, 1708.760049, 353.990000, X, Y) && !ellipse(24016.252000, 20991.632000, 2770.096080, 2770.096080, 0.000000, X, Y) && !ellipse(24457.399170, 20494.944504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25190.384000, 25920.328000, 1088.128031, 1088.128031, 0.000000, X, Y) && !ellipse(25953.405160, 25875.003200, 1033.256030, 1033.256030, 0.000000, X, Y) && !ellipse(25449.085600, 23861.966300, 1174.736034, 1174.736034, 0.000000, X, Y) && !ellipse(23336.832000, 21342.594000, 1385.048040, 1385.048040, 0.000000, X, Y)
[Sat Jun 22 04:09:00 2013] Writing fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src93.gif
[Sat Jun 22 04:09:07 2013] ../../xmm0110010701/products/events/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src93_src.evt and ../../xmm0110010701/products/events/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src93_bgd.evt exist, delete to re-create
[Sat Jun 22 04:09:07 2013] Mean detx,y = (5206.89, -4701.46) 
[Sat Jun 22 04:09:07 2013] ../../xmm0110010701/products/images/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src93_src.img and ../../xmm0110010701/products/images/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src93_bgd.img exist, delete to re-create
[Sat Jun 22 04:09:07 2013] ../../xmm0110010701/products/spectra/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src93_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src93_bgd.pi exist, delete to re-create
[Sat Jun 22 04:09:07 2013] Setting source spectrum file to fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src93_src_b10.pi.gz
[Sat Jun 22 04:09:07 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src93_bgd.pi.gz
[Sat Jun 22 04:09:07 2013] ../../xmm0110010701/products/lightcurves/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src93_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src93_bgd.lc exist, delete to re-create
[Sat Jun 22 04:09:33 2013] fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src93.rmf exists, delete to re-create
[Sat Jun 22 04:09:33 2013] fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src93.arf exists, delete to re-create
[Sat Jun 22 04:11:34 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:11:34 2013] Total counts from fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src93_src_b10.pi.gz = 1150.00
[Sat Jun 22 04:11:34 2013] Total counts from fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src93_bgd.pi.gz = 2295.00
[Sat Jun 22 04:11:34 2013] Got source and background scale factors 3300800.000000, 11964008.000000
[Sat Jun 22 04:11:34 2013] User source parameters:
  Position = (266.5, 249.9) = 14 43 19.90 -62 42 45.0
  Extent = 17.1 (17.0-34.1)", rotation angle = 0
  Source aperture counts = 516.8 +/- 34.9
  Background aperture counts = 633.2
  Rate = 0.03 +/- 0.002

[Sat Jun 22 04:11:43 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:11:43 2013] Using photon index=1.80, rate=0.0126, arf fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src93.arf
[Sat Jun 22 04:11:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:11:43 2013] Updating source flux to 2.4e-13
[Sat Jun 22 04:13:00 2013] Flag c found in src. 93 procflags, skipping spectral fitting
[Sat Jun 22 04:14:22 2013] xmm0110010701/analysis//spectral/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src93_pl.csv not found, spectral fit skipped or did not complete