[Sat Jun 22 00:46:00 2013] Detection parameters:
  Position = (332.0, 240.6) = 14 42 38.44 -62 43 23.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 165.9 +/- 20.3
  Background counts = 150.2
  Rate = 0.02 +/- 0.002

[Sat Jun 22 00:46:06 2013] Off-axis axis estimate = 4.85'
[Sat Jun 22 00:48:03 2013] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:48:03 2013] Initial guess for spatial extent in simple fitting = 8.85"
[Sat Jun 22 00:48:03 2013] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.700
[Sat Jun 22 00:48:03 2013] Giving source the simple spatial ID 34 for pass 0, mean size = 8.85"
[Sat Jun 22 00:48:06 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src34.ximg exists
[Sat Jun 22 00:48:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src34.csv
[Sat Jun 22 00:48:06 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src34_1.ximg exists
[Sat Jun 22 00:48:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src34.csv
[Sat Jun 22 00:48:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:11 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Sat Jun 22 00:48:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src34.csv
[Sat Jun 22 00:48:11 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Sat Jun 22 00:48:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src34.csv
[Sat Jun 22 00:48:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:49:53 2013] Warning: source 34 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 73 at 14.981619 pixels away
[Sat Jun 22 00:49:54 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:49:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:49:54 2013] Assessing source extent using major
[Sat Jun 22 00:49:54 2013] Source does appear to be extended
[Sat Jun 22 00:49:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:49:54 2013] Source is confused with source 38
[Sat Jun 22 00:49:54 2013] Source is confused with source 76
[Sat Jun 22 00:50:55 2013] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:55 2013] Initial guess for spatial extent in simple fitting = 8.85"
[Sat Jun 22 00:50:55 2013] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.700
[Sat Jun 22 00:50:55 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 8.85"
[Sat Jun 22 00:50:57 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src32.ximg exists
[Sat Jun 22 00:50:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src32.csv
[Sat Jun 22 00:50:57 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src32_1.ximg exists
[Sat Jun 22 00:50:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src32.csv
[Sat Jun 22 00:50:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:51:01 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Sat Jun 22 00:51:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src32.csv
[Sat Jun 22 00:51:01 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Sat Jun 22 00:51:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src32.csv
[Sat Jun 22 00:51:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:52:31 2013] Spatial fit model total counts = 2759.630000, observed total counts = 2062.000000
[Sat Jun 22 00:52:31 2013] Poor agreement between spatial fit and data for source 73
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 00:52:31 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:52:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:52:31 2013] Assessing source extent using major
[Sat Jun 22 00:52:31 2013] Source does appear to be extended
[Sat Jun 22 00:52:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 04:08:54 2013] XMMSAS src. selection expression = ellipse(28835.492035, 20883.948776, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 04:08:54 2013] Not overwriting source region fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src73_src.reg
[Sat Jun 22 04:08:54 2013] Extracting stamp from image fullrun_mos2_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (294, 203) - (369, 278)
[Sat Jun 22 04:08:54 2013] XMMSAS bgd. selection expression = annulus(28835.492035, 20883.948776, 1087.500000, 2175.000000, X, Y) && !ellipse(31076.646000, 19551.482000, 1536.832044, 1536.832044, 0.000000, X, Y) && !ellipse(33200.426000, 17527.448000, 2533.024073, 2533.024073, 0.000000, X, Y) && !ellipse(31785.832275, 18131.855591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30660.139679, 19947.907578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30157.476000, 20484.472000, 1536.832044, 1536.832044, 0.000000, X, Y) && !ellipse(29317.055939, 20979.987823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31729.861603, 21815.321106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30513.292400, 21623.242000, 1089.056031, 1089.056031, 0.000000, X, Y) && !ellipse(30918.699707, 20958.815292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31531.812347, 21203.967422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26335.381000, 19513.154000, 1448.680042, 1448.680042, 0.000000, X, Y) && !ellipse(29539.242065, 21389.155716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29386.848694, 19079.403687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25025.456000, 20890.844000, 1708.760049, 1708.760049, 353.990000, X, Y) && !ellipse(29431.080000, 20436.084000, 872.192025, 872.192025, 0.000000, X, Y) && !ellipse(24016.252000, 20991.632000, 2770.096080, 2770.096080, 0.000000, X, Y) && !ellipse(28564.498000, 19178.744800, 1499.872043, 1499.872043, 0.000000, X, Y) && !ellipse(29924.424000, 23049.397600, 1413.344041, 1413.344041, 0.000000, X, Y) && !ellipse(28242.922000, 19110.665600, 1517.944044, 1517.944044, 0.000000, X, Y)
[Sat Jun 22 04:08:54 2013] Writing fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src73.gif
[Sat Jun 22 04:09:06 2013] ../../xmm0110010701/products/events/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src73_src.evt and ../../xmm0110010701/products/events/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src73_bgd.evt exist, delete to re-create
[Sat Jun 22 04:09:06 2013] Mean detx,y = (110.66, -7400.20) 
[Sat Jun 22 04:09:06 2013] ../../xmm0110010701/products/images/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src73_src.img and ../../xmm0110010701/products/images/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src73_bgd.img exist, delete to re-create
[Sat Jun 22 04:09:06 2013] ../../xmm0110010701/products/spectra/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src73_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src73_bgd.pi exist, delete to re-create
[Sat Jun 22 04:09:06 2013] Setting source spectrum file to fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Sat Jun 22 04:09:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src73_bgd.pi.gz
[Sat Jun 22 04:09:06 2013] ../../xmm0110010701/products/lightcurves/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src73_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src73_bgd.lc exist, delete to re-create
[Sat Jun 22 04:09:33 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 04:09:33 2013] rmf not generated due to insufficient counts
[Sat Jun 22 04:09:33 2013] fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src73.arf exists, delete to re-create
[Sat Jun 22 04:11:25 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:11:25 2013] Total counts from fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src73_src_b10.pi.gz = 1492.00
[Sat Jun 22 04:11:25 2013] Total counts from fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src73_bgd.pi.gz = 1916.00
[Sat Jun 22 04:11:25 2013] Got source and background scale factors 1026444.000000, 2444405.000000
[Sat Jun 22 04:11:25 2013] User source parameters:
  Position = (332.0, 240.6) = 14 42 38.44 -62 43 23.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 687.4 +/- 39.6
  Background aperture counts = 804.6
  Rate = 0.04 +/- 0.002

[Sat Jun 22 04:11:25 2013] Updating counts from extracted products
[Sat Jun 22 04:11:25 2013] Set source signif. to 687.44/28.36 = 24.24
[Sat Jun 22 04:11:42 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:11:42 2013] Using photon index=1.80, rate=0.0396, arf fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src73.arf
[Sat Jun 22 04:11:42 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:11:42 2013] Updating source flux to 1e-12
[Sat Jun 22 04:13:00 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 04:14:22 2013] xmm0110010701/analysis//spectral/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src73_pl.csv not found, spectral fit skipped or did not complete