[Sat Jun 22 00:45:58 2013] Detection parameters:
  Position = (398.1, 276.7) = 14 41 56.67 -62 40 54.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 125.5 +/- 17.7
  Background counts = 111.1
  Rate = 0.01 +/- 0.002

[Sat Jun 22 00:46:06 2013] Off-axis axis estimate = 7.40'
[Sat Jun 22 00:48:03 2013] Using EEF radius (= 10.13 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:48:03 2013] Initial guess for spatial extent in simple fitting = 10.13"
[Sat Jun 22 00:48:03 2013] source mask rpix=2.3, npix_max = 31, mask sum = 27, frac = 0.844
[Sat Jun 22 00:48:03 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 10.13"
[Sat Jun 22 00:48:06 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src43.ximg exists
[Sat Jun 22 00:48:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src43.csv
[Sat Jun 22 00:48:06 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src43_1.ximg exists
[Sat Jun 22 00:48:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src43.csv
[Sat Jun 22 00:48:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:11 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Sat Jun 22 00:48:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src43.csv
[Sat Jun 22 00:48:11 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Sat Jun 22 00:48:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src43.csv
[Sat Jun 22 00:48:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:49:54 2013] Spatial fit model total counts = 2128.090000, observed total counts = 1645.000000
[Sat Jun 22 00:49:54 2013] Poor agreement between spatial fit and data for source 53
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 00:49:54 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:49:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:49:54 2013] Assessing source extent using major
[Sat Jun 22 00:49:54 2013] Source does appear to be extended
[Sat Jun 22 00:49:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:49:54 2013] Source is confused with source 57
[Sat Jun 22 00:50:55 2013] Using EEF radius (= 10.13 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:55 2013] Initial guess for spatial extent in simple fitting = 10.13"
[Sat Jun 22 00:50:55 2013] source mask rpix=2.3, npix_max = 31, mask sum = 27, frac = 0.844
[Sat Jun 22 00:50:55 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 10.13"
[Sat Jun 22 00:50:57 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src41.ximg exists
[Sat Jun 22 00:50:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src41.csv
[Sat Jun 22 00:50:57 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src41_1.ximg exists
[Sat Jun 22 00:50:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src41.csv
[Sat Jun 22 00:50:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:51:02 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Sat Jun 22 00:51:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src41.csv
[Sat Jun 22 00:51:02 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Sat Jun 22 00:51:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src41.csv
[Sat Jun 22 00:51:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:52:30 2013] Source 53 is offset by 4.585572 and 5.156067 pixels which is larger than
2 X fitted extent = 1.819697 x 1.819697, not incorporating fit results
[Sat Jun 22 00:52:31 2013] Warning, spatial fit 41 centroid is now closest to src. 126
[Sat Jun 22 00:52:31 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:52:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:52:31 2013] Assessing source extent using major
[Sat Jun 22 00:52:31 2013] Source does appear to be extended
[Sat Jun 22 00:52:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 04:08:55 2013] XMMSAS src. selection expression = ellipse(34589.954742, 24025.587860, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 04:08:56 2013] Not overwriting source region fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src53_src.reg
[Sat Jun 22 04:08:56 2013] Extracting stamp from image fullrun_mos2_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (361, 239) - (436, 314)
[Sat Jun 22 04:08:56 2013] XMMSAS bgd. selection expression = annulus(34589.954742, 24025.587860, 1087.500000, 2175.000000, X, Y) && !ellipse(33134.261200, 22215.270000, 1971.752057, 1971.752057, 0.000000, X, Y) && !ellipse(33958.365753, 22833.044281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35608.909851, 21783.480667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32868.752135, 22030.452307, 1579.456045, 1579.456045, 334.533500, X, Y) && !ellipse(33396.909363, 22406.813843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35589.644344, 21052.202940, 854.720025, 853.640971, -0.000000, X, Y) && !ellipse(34682.896000, 22813.606400, 1602.792046, 1602.792046, 0.000000, X, Y) && !ellipse(36752.964000, 19522.114000, 2381.184069, 1798.184052, 5.364380, X, Y) && !ellipse(37937.068000, 22452.038000, 1652.312048, 1652.312048, 0.000000, X, Y) && !ellipse(36143.329200, 21556.132000, 1635.744047, 936.304027, 124.163000, X, Y) && !ellipse(34490.634000, 21774.560000, 1634.680047, 1634.680047, 0.000000, X, Y) && !ellipse(34722.136000, 23251.774000, 1695.840049, 1695.840049, 0.000000, X, Y) && !ellipse(35084.364000, 20873.742200, 1714.848049, 1714.848049, 0.000000, X, Y) && !ellipse(33382.120850, 23653.400543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35504.066200, 23535.392200, 1688.672049, 1688.672049, 0.000000, X, Y) && !ellipse(35754.380000, 20851.366000, 3269.360094, 3269.360094, 0.000000, X, Y) && !ellipse(37246.828000, 22051.418000, 3812.752110, 3812.752110, 0.000000, X, Y) && !ellipse(31729.861603, 21815.321106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38174.666000, 22752.646000, 3912.016113, 3912.016113, 0.000000, X, Y) && !ellipse(35351.183502, 22576.504730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33136.620000, 21204.689000, 1383.776040, 1383.776040, 0.000000, X, Y) && !ellipse(32429.469788, 23505.945526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32005.129730, 21280.843796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32004.322601, 23342.430237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36533.372467, 23297.485901, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 04:08:56 2013] Writing fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src53.gif
[Sat Jun 22 04:09:06 2013] ../../xmm0110010701/products/events/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src53_src.evt and ../../xmm0110010701/products/events/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src53_bgd.evt exist, delete to re-create
[Sat Jun 22 04:09:06 2013] Mean detx,y = (-6257.18, -6357.18) 
[Sat Jun 22 04:09:06 2013] ../../xmm0110010701/products/images/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src53_src.img and ../../xmm0110010701/products/images/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src53_bgd.img exist, delete to re-create
[Sat Jun 22 04:09:06 2013] ../../xmm0110010701/products/spectra/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src53_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src53_bgd.pi exist, delete to re-create
[Sat Jun 22 04:09:06 2013] Setting source spectrum file to fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sat Jun 22 04:09:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Sat Jun 22 04:09:06 2013] ../../xmm0110010701/products/lightcurves/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src53_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src53_bgd.lc exist, delete to re-create
[Sat Jun 22 04:09:33 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 04:09:33 2013] rmf not generated due to insufficient counts
[Sat Jun 22 04:09:33 2013] fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src53.arf exists, delete to re-create
[Sat Jun 22 04:11:27 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:11:27 2013] Total counts from fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src53_src_b10.pi.gz = 1061.00
[Sat Jun 22 04:11:28 2013] Total counts from fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src53_bgd.pi.gz = 1285.00
[Sat Jun 22 04:11:28 2013] Got source and background scale factors 1021344.000000, 3131320.000000
[Sat Jun 22 04:11:28 2013] User source parameters:
  Position = (398.1, 276.7) = 14 41 56.67 -62 40 54.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 641.9 +/- 33.6
  Background aperture counts = 419.1
  Rate = 0.04 +/- 0.002

[Sat Jun 22 04:11:28 2013] Updating counts from extracted products
[Sat Jun 22 04:11:28 2013] Set source signif. to 641.87/20.47 = 31.35
[Sat Jun 22 04:11:42 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:11:42 2013] Using photon index=1.80, rate=0.037, arf fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src53.arf
[Sat Jun 22 04:11:42 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:11:42 2013] Updating source flux to 1e-12
[Sat Jun 22 04:13:00 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 04:14:22 2013] xmm0110010701/analysis//spectral/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src53_pl.csv not found, spectral fit skipped or did not complete