[Sat Jun 22 00:45:58 2013] Detection parameters:
  Position = (486.3, 390.4) = 14 41 1.50 -62 32 30.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.4 +/- 14.9
  Background counts = 21.7
  Rate = 0.005 +/- 0.0009

[Sat Jun 22 00:46:06 2013] Off-axis axis estimate = 15.17'
[Sat Jun 22 00:48:03 2013] Using EEF radius (= 14.01 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:48:03 2013] Initial guess for spatial extent in simple fitting = 14.01"
[Sat Jun 22 00:48:03 2013] source mask rpix=3.2, npix_max = 55, mask sum = 41, frac = 0.740
[Sat Jun 22 00:48:03 2013] Giving source the simple spatial ID 94 for pass 0, mean size = 14.01"
[Sat Jun 22 00:48:08 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src94.ximg exists
[Sat Jun 22 00:48:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src94.csv
[Sat Jun 22 00:48:08 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src94_1.ximg exists
[Sat Jun 22 00:48:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src94.csv
[Sat Jun 22 00:48:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src94_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:12 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src94.ximg exists
[Sat Jun 22 00:48:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src94.csv
[Sat Jun 22 00:48:12 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src94_1.ximg exists
[Sat Jun 22 00:48:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src94.csv
[Sat Jun 22 00:48:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src94_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:49:54 2013] Spatial fit model total counts = -896.183000, observed total counts = 758.000000
[Sat Jun 22 00:49:54 2013] Poor agreement between spatial fit and data for source 47
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 00:49:54 2013] Source 47 is offset by -2.223185 and -2.255636 pixels which is larger than
2 X fitted extent = 1.617586 x 1.617586, not incorporating fit results
[Sat Jun 22 00:49:54 2013] Warning, spatial fit 94 centroid is now closest to src. 48
[Sat Jun 22 00:49:54 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:49:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:49:54 2013] Assessing source extent using major
[Sat Jun 22 00:49:54 2013] Source does appear to be extended
[Sat Jun 22 00:49:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:49:54 2013] Source is confused with source 24
[Sat Jun 22 00:50:55 2013] Using EEF radius (= 14.01 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:55 2013] Initial guess for spatial extent in simple fitting = 14.01"
[Sat Jun 22 00:50:55 2013] source mask rpix=3.2, npix_max = 55, mask sum = 41, frac = 0.740
[Sat Jun 22 00:50:55 2013] Giving source the simple spatial ID 86 for pass 1, mean size = 14.01"
[Sat Jun 22 00:51:00 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src86.ximg exists
[Sat Jun 22 00:51:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src86.csv
[Sat Jun 22 00:51:00 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src86_1.ximg exists
[Sat Jun 22 00:51:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src86.csv
[Sat Jun 22 00:51:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src86_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:51:03 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src86.ximg exists
[Sat Jun 22 00:51:03 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src86.csv
[Sat Jun 22 00:51:03 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src86_1.ximg exists
[Sat Jun 22 00:51:03 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src86.csv
[Sat Jun 22 00:51:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src86_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:52:31 2013] Spatial fit model total counts = -609.802000, observed total counts = 758.000000
[Sat Jun 22 00:52:31 2013] Poor agreement between spatial fit and data for source 47
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 00:52:31 2013] Warning, spatial fit 86 centroid is now closest to src. 48
[Sat Jun 22 00:52:31 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:52:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:52:31 2013] Assessing source extent using major
[Sat Jun 22 00:52:31 2013] Source does appear to be extended
[Sat Jun 22 00:52:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 04:09:01 2013] XMMSAS src. selection expression = ellipse(42263.400940, 33918.083649, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 04:09:01 2013] Not overwriting source region fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src47_src.reg
[Sat Jun 22 04:09:01 2013] Extracting stamp from image fullrun_mos2_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (449, 353) - (524, 428)
[Sat Jun 22 04:09:01 2013] XMMSAS bgd. selection expression = annulus(42263.400940, 33918.083649, 1087.500000, 2175.000000, X, Y) && !ellipse(40198.006000, 37503.690000, 2231.304064, 2231.304064, 0.000000, X, Y) && !ellipse(38985.468000, 37350.932000, 2180.392063, 2180.392063, 0.000000, X, Y) && !ellipse(41969.706909, 34492.645264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40515.711975, 36323.295929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41116.842468, 36472.168732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39996.937836, 35981.649414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40516.641235, 35447.733643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41537.048645, 35686.755310, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 04:09:01 2013] Writing fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src47.gif
[Sat Jun 22 04:09:08 2013] ../../xmm0110010701/products/events/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src47_src.evt and ../../xmm0110010701/products/events/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src47_bgd.evt exist, delete to re-create
[Sat Jun 22 04:09:08 2013] Mean detx,y = (-16734.31, 358.77) 
[Sat Jun 22 04:09:08 2013] ../../xmm0110010701/products/images/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src47_src.img and ../../xmm0110010701/products/images/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src47_bgd.img exist, delete to re-create
[Sat Jun 22 04:09:08 2013] ../../xmm0110010701/products/spectra/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src47_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src47_bgd.pi exist, delete to re-create
[Sat Jun 22 04:09:08 2013] Setting source spectrum file to fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Sat Jun 22 04:09:08 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Sat Jun 22 04:09:08 2013] ../../xmm0110010701/products/lightcurves/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src47_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src47_bgd.lc exist, delete to re-create
[Sat Jun 22 04:09:33 2013] Not generating rmf since there are only 93 counts
[Sat Jun 22 04:09:33 2013] rmf not generated due to insufficient counts
[Sat Jun 22 04:09:33 2013] fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src47.arf exists, delete to re-create
[Sat Jun 22 04:11:38 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:11:38 2013] Total counts from fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src47_src_b10.pi.gz = 354.00
[Sat Jun 22 04:11:38 2013] Total counts from fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src47_bgd.pi.gz = 658.00
[Sat Jun 22 04:11:38 2013] Got source and background scale factors 742044.000000, 3972770.000000
[Sat Jun 22 04:11:38 2013] User source parameters:
  Position = (486.3, 390.4) = 14 41 1.50 -62 32 30.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 231.1 +/- 19.8
  Background aperture counts = 122.9
  Rate = 0.01 +/- 0.001

[Sat Jun 22 04:11:38 2013] Updating counts from extracted products
[Sat Jun 22 04:11:38 2013] Set source signif. to 231.10/11.09 = 20.85
[Sat Jun 22 04:11:44 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:11:44 2013] Using photon index=1.80, rate=0.0133, arf fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src47.arf
[Sat Jun 22 04:11:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:11:44 2013] Updating source flux to 6.2e-13
[Sat Jun 22 04:13:00 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 04:14:22 2013] xmm0110010701/analysis//spectral/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src47_pl.csv not found, spectral fit skipped or did not complete