[Sat Jun 22 00:45:57 2013] Detection parameters:
  Position = (478.0, 410.8) = 14 41 6.84 -62 30 58.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.7 +/- 13.4
  Background counts = 23.8
  Rate = 0.005 +/- 0.0008

[Sat Jun 22 00:46:06 2013] Off-axis axis estimate = 15.35'
[Sat Jun 22 00:48:03 2013] Using EEF radius (= 14.11 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:48:03 2013] Initial guess for spatial extent in simple fitting = 14.11"
[Sat Jun 22 00:48:03 2013] source mask rpix=3.2, npix_max = 56, mask sum = 44, frac = 0.785
[Sat Jun 22 00:48:03 2013] Giving source the simple spatial ID 100 for pass 0, mean size = 14.11"
[Sat Jun 22 00:48:09 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src100.ximg exists
[Sat Jun 22 00:48:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src100.csv
[Sat Jun 22 00:48:09 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src100_1.ximg exists
[Sat Jun 22 00:48:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src100.csv
[Sat Jun 22 00:48:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src100_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:13 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src100.ximg exists
[Sat Jun 22 00:48:13 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src100.csv
[Sat Jun 22 00:48:13 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src100_1.ximg exists
[Sat Jun 22 00:48:13 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src100.csv
[Sat Jun 22 00:48:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src100_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:49:54 2013] Source 44 is offset by -1.479487 and -3.775640 pixels which is larger than
2 X fitted extent = 1.621789 x 1.621789, not incorporating fit results
[Sat Jun 22 00:49:54 2013] Warning, spatial fit 100 centroid is now closest to src. 30
[Sat Jun 22 00:49:54 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:49:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:49:54 2013] Assessing source extent using major
[Sat Jun 22 00:49:54 2013] Source does appear to be extended
[Sat Jun 22 00:49:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:50:55 2013] Using EEF radius (= 14.11 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:55 2013] Initial guess for spatial extent in simple fitting = 14.11"
[Sat Jun 22 00:50:55 2013] source mask rpix=3.2, npix_max = 56, mask sum = 44, frac = 0.785
[Sat Jun 22 00:50:55 2013] Giving source the simple spatial ID 92 for pass 1, mean size = 14.11"
[Sat Jun 22 00:51:00 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src92.ximg exists
[Sat Jun 22 00:51:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src92.csv
[Sat Jun 22 00:51:00 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src92_1.ximg exists
[Sat Jun 22 00:51:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src92.csv
[Sat Jun 22 00:51:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src92_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src92.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:51:04 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src92.ximg exists
[Sat Jun 22 00:51:04 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src92.csv
[Sat Jun 22 00:51:04 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src92_1.ximg exists
[Sat Jun 22 00:51:04 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src92.csv
[Sat Jun 22 00:51:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src92_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src92.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:52:31 2013] Source 44 is offset by -0.211901 and -5.539461 pixels which is larger than
2 X fitted extent = 1.600336 x 1.600336, not incorporating fit results
[Sat Jun 22 00:52:31 2013] Spatial fit model total counts = 1533.420000, observed total counts = 894.000000
[Sat Jun 22 00:52:31 2013] Poor agreement between spatial fit and data for source 44
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 00:52:31 2013] Spatial fit model total counts = -327.103000, observed total counts = 774.000000
[Sat Jun 22 00:52:31 2013] Poor agreement between spatial fit and data for source 44
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 00:52:31 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:52:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:52:31 2013] Assessing source extent using major
[Sat Jun 22 00:52:31 2013] Source does appear to be extended
[Sat Jun 22 00:52:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 04:09:01 2013] XMMSAS src. selection expression = ellipse(41537.048645, 35686.755310, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 04:09:02 2013] Not overwriting source region fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src44_src.reg
[Sat Jun 22 04:09:02 2013] Extracting stamp from image fullrun_mos2_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (440, 373) - (515, 448)
[Sat Jun 22 04:09:02 2013] XMMSAS bgd. selection expression = annulus(41537.048645, 35686.755310, 1087.500000, 2175.000000, X, Y) && !ellipse(40198.006000, 37503.690000, 2231.304064, 2231.304064, 0.000000, X, Y) && !ellipse(38985.468000, 37350.932000, 2180.392063, 2180.392063, 0.000000, X, Y) && !ellipse(41969.706909, 34492.645264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40515.711975, 36323.295929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40579.886688, 37085.990265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39490.613129, 37797.978851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41116.842468, 36472.168732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39996.937836, 35981.649414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42263.400940, 33918.083649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40516.641235, 35447.733643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37248.890000, 38374.628000, 2162.704062, 2162.704062, 0.000000, X, Y)
[Sat Jun 22 04:09:02 2013] Writing fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src44.gif
[Sat Jun 22 04:09:08 2013] ../../xmm0110010701/products/events/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src44_src.evt and ../../xmm0110010701/products/events/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src44_bgd.evt exist, delete to re-create
[Sat Jun 22 04:09:08 2013] Mean detx,y = (-16584.18, 2229.99) 
[Sat Jun 22 04:09:08 2013] ../../xmm0110010701/products/images/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src44_src.img and ../../xmm0110010701/products/images/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src44_bgd.img exist, delete to re-create
[Sat Jun 22 04:09:08 2013] ../../xmm0110010701/products/spectra/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src44_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src44_bgd.pi exist, delete to re-create
[Sat Jun 22 04:09:08 2013] Setting source spectrum file to fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sat Jun 22 04:09:08 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Sat Jun 22 04:09:08 2013] ../../xmm0110010701/products/lightcurves/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src44_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src44_bgd.lc exist, delete to re-create
[Sat Jun 22 04:09:33 2013] Not generating rmf since there are only 84 counts
[Sat Jun 22 04:09:33 2013] rmf not generated due to insufficient counts
[Sat Jun 22 04:09:33 2013] fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src44.arf exists, delete to re-create
[Sat Jun 22 04:11:39 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:11:39 2013] Total counts from fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src44_src_b10.pi.gz = 392.00
[Sat Jun 22 04:11:39 2013] Total counts from fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src44_bgd.pi.gz = 271.00
[Sat Jun 22 04:11:39 2013] Got source and background scale factors 717954.000000, 1173648.000000
[Sat Jun 22 04:11:39 2013] User source parameters:
  Position = (478.0, 410.8) = 14 41 6.84 -62 30 58.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 226.2 +/- 20.8
  Background aperture counts = 165.8
  Rate = 0.01 +/- 0.001

[Sat Jun 22 04:11:39 2013] Updating counts from extracted products
[Sat Jun 22 04:11:39 2013] Set source signif. to 226.22/12.88 = 17.57
[Sat Jun 22 04:11:44 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:11:44 2013] Using photon index=1.80, rate=0.013, arf fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src44.arf
[Sat Jun 22 04:11:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:11:44 2013] Updating source flux to 1.1e-12
[Sat Jun 22 04:13:00 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 04:14:22 2013] xmm0110010701/analysis//spectral/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src44_pl.csv not found, spectral fit skipped or did not complete