[Sat Jun 22 00:45:57 2013] Detection parameters:
  Position = (337.5, 241.7) = 14 42 34.94 -62 43 29.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 277.5 +/- 25.0
  Background counts = 165.3
  Rate = 0.02 +/- 0.002

[Sat Jun 22 00:46:06 2013] Off-axis axis estimate = 5.00'
[Sat Jun 22 00:48:03 2013] Using EEF radius (= 8.93 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:48:03 2013] Initial guess for spatial extent in simple fitting = 8.93"
[Sat Jun 22 00:48:03 2013] source mask rpix=2.1, npix_max = 26, mask sum = 15, frac = 0.576
[Sat Jun 22 00:48:03 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 8.93"
[Sat Jun 22 00:48:06 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src26.ximg exists
[Sat Jun 22 00:48:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src26.csv
[Sat Jun 22 00:48:06 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src26_1.ximg exists
[Sat Jun 22 00:48:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src26.csv
[Sat Jun 22 00:48:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:10 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sat Jun 22 00:48:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sat Jun 22 00:48:10 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sat Jun 22 00:48:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sat Jun 22 00:48:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:49:53 2013] Warning, spatial fit 26 centroid is now closest to src. 76
[Sat Jun 22 00:49:54 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:49:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:49:54 2013] Assessing source extent using major
[Sat Jun 22 00:49:54 2013] Source does appear to be extended
[Sat Jun 22 00:49:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:49:54 2013] Source is confused with source 16
[Sat Jun 22 00:50:55 2013] Using EEF radius (= 8.93 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:55 2013] Initial guess for spatial extent in simple fitting = 8.93"
[Sat Jun 22 00:50:55 2013] source mask rpix=2.1, npix_max = 26, mask sum = 15, frac = 0.576
[Sat Jun 22 00:50:55 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 8.93"
[Sat Jun 22 00:50:57 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src25.ximg exists
[Sat Jun 22 00:50:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src25.csv
[Sat Jun 22 00:50:57 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src25_1.ximg exists
[Sat Jun 22 00:50:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src25.csv
[Sat Jun 22 00:50:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:51:01 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sat Jun 22 00:51:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sat Jun 22 00:51:01 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sat Jun 22 00:51:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sat Jun 22 00:51:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:52:30 2013] Warning, spatial fit 25 centroid is now closest to src. 16
[Sat Jun 22 00:52:31 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:52:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:52:31 2013] Assessing source extent using major
[Sat Jun 22 00:52:31 2013] Source does appear to be extended
[Sat Jun 22 00:52:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 04:08:53 2013] XMMSAS src. selection expression = ellipse(29317.055939, 20979.987823, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 04:08:53 2013] Not overwriting source region fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src38_src.reg
[Sat Jun 22 04:08:53 2013] Extracting stamp from image fullrun_mos2_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (300, 204) - (375, 279)
[Sat Jun 22 04:08:53 2013] XMMSAS bgd. selection expression = annulus(29317.055939, 20979.987823, 1087.500000, 2175.000000, X, Y) && !ellipse(31076.646000, 19551.482000, 1536.832044, 1536.832044, 0.000000, X, Y) && !ellipse(33200.426000, 17527.448000, 2533.024073, 2533.024073, 0.000000, X, Y) && !ellipse(32849.173568, 17746.308111, 1602.792046, 930.228580, 168.755150, X, Y) && !ellipse(33134.261200, 22215.270000, 1971.752057, 1971.752057, 0.000000, X, Y) && !ellipse(32868.752135, 22030.452307, 1579.456045, 1579.456045, 334.533500, X, Y) && !ellipse(31785.832275, 18131.855591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30660.139679, 19947.907578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30157.476000, 20484.472000, 1536.832044, 1536.832044, 0.000000, X, Y) && !ellipse(28835.492035, 20883.948776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31729.861603, 21815.321106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30513.292400, 21623.242000, 1089.056031, 1089.056031, 0.000000, X, Y) && !ellipse(30918.699707, 20958.815292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31531.812347, 21203.967422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32005.129730, 21280.843796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26335.381000, 19513.154000, 1448.680042, 1448.680042, 0.000000, X, Y) && !ellipse(32004.322601, 23342.430237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29539.242065, 21389.155716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29386.848694, 19079.403687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29431.080000, 20436.084000, 872.192025, 872.192025, 0.000000, X, Y) && !ellipse(28564.498000, 19178.744800, 1499.872043, 1499.872043, 0.000000, X, Y) && !ellipse(29924.424000, 23049.397600, 1413.344041, 1413.344041, 0.000000, X, Y) && !ellipse(28242.922000, 19110.665600, 1517.944044, 1517.944044, 0.000000, X, Y)
[Sat Jun 22 04:08:53 2013] Writing fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src38.gif
[Sat Jun 22 04:09:06 2013] ../../xmm0110010701/products/events/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src38_src.evt and ../../xmm0110010701/products/events/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src38_bgd.evt exist, delete to re-create
[Sat Jun 22 04:09:06 2013] Mean detx,y = (-377.66, -7478.42) 
[Sat Jun 22 04:09:06 2013] ../../xmm0110010701/products/images/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src38_src.img and ../../xmm0110010701/products/images/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src38_bgd.img exist, delete to re-create
[Sat Jun 22 04:09:06 2013] ../../xmm0110010701/products/spectra/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src38_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src38_bgd.pi exist, delete to re-create
[Sat Jun 22 04:09:06 2013] Setting source spectrum file to fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sat Jun 22 04:09:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Sat Jun 22 04:09:06 2013] ../../xmm0110010701/products/lightcurves/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src38_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src38_bgd.lc exist, delete to re-create
[Sat Jun 22 04:09:33 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 04:09:33 2013] rmf not generated due to insufficient counts
[Sat Jun 22 04:09:33 2013] fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src38.arf exists, delete to re-create
[Sat Jun 22 04:11:23 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:11:23 2013] Total counts from fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src38_src_b10.pi.gz = 1885.00
[Sat Jun 22 04:11:23 2013] Total counts from fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src38_bgd.pi.gz = 1557.00
[Sat Jun 22 04:11:23 2013] Got source and background scale factors 1051778.000000, 1935979.000000
[Sat Jun 22 04:11:23 2013] User source parameters:
  Position = (337.5, 241.7) = 14 42 34.94 -62 43 29.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1039.1 +/- 44.4
  Background aperture counts = 845.9
  Rate = 0.06 +/- 0.003

[Sat Jun 22 04:11:23 2013] Updating counts from extracted products
[Sat Jun 22 04:11:23 2013] Set source signif. to 1039.11/29.08 = 35.73
[Sat Jun 22 04:11:41 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:11:41 2013] Using photon index=1.80, rate=0.0599, arf fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src38.arf
[Sat Jun 22 04:11:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:11:41 2013] Updating source flux to 1.7e-12
[Sat Jun 22 04:13:00 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 04:14:22 2013] xmm0110010701/analysis//spectral/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete