[Sat Jun 22 00:45:56 2013] Detection parameters:
  Position = (391.7, 274.6) = 14 42 0.77 -62 41 4.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 245.2 +/- 24.2
  Background counts = 113.4
  Rate = 0.02 +/- 0.002

[Sat Jun 22 00:46:06 2013] Off-axis axis estimate = 6.98'
[Sat Jun 22 00:48:03 2013] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:48:03 2013] Initial guess for spatial extent in simple fitting = 9.92"
[Sat Jun 22 00:48:03 2013] source mask rpix=2.3, npix_max = 30, mask sum = 20, frac = 0.647
[Sat Jun 22 00:48:03 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 9.92"
[Sat Jun 22 00:48:06 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src24.ximg exists
[Sat Jun 22 00:48:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src24.csv
[Sat Jun 22 00:48:06 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src24_1.ximg exists
[Sat Jun 22 00:48:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src24.csv
[Sat Jun 22 00:48:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:10 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sat Jun 22 00:48:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sat Jun 22 00:48:10 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sat Jun 22 00:48:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sat Jun 22 00:48:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:49:53 2013] Warning, spatial fit 24 centroid is now closest to src. 126
[Sat Jun 22 00:49:54 2013] Spatial fit model total counts = 1628.630000, observed total counts = 1627.000000
[Sat Jun 22 00:49:54 2013] Offset between fit and detection position for source 31 = 1.010021 pixels
[Sat Jun 22 00:49:54 2013] Warning, changing simple spatial fit ID from 24 to 91
[Sat Jun 22 00:49:54 2013] 1479.862900 total counts/ 1446.370000 bgd. counts: snr = 0.880670
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 1.010021 pixels
  Position = (391.6, 273.6) = 14 42 0.84 -62 41 1.0
  Extent = 2.5 (2.4-4.4)", rotation angle = 0
  Source counts = 33.5 +/- 38.5
  Background counts = 1446.4
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability